diff options
| -rw-r--r-- | src/common/qca-vendor.h | 93 |
1 files changed, 93 insertions, 0 deletions
diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h index d3683728..36bacc0f 100644 --- a/src/common/qca-vendor.h +++ b/src/common/qca-vendor.h @@ -188,6 +188,10 @@ enum qca_radiotap_vendor_ids { * * @QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI: Get antenna RSSI value for a * specific chain. + * + * @QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS: Configure the TDLS behavior + * in the host driver. The different TDLS configurations are defined + * by the attributes in enum qca_wlan_vendor_attr_tdls_configuration. */ enum qca_nl80211_vendor_subcmds { QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0, @@ -288,6 +292,7 @@ enum qca_nl80211_vendor_subcmds { QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS_RESULT = 136, QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST = 137, QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI = 138, + QCA_NL80211_VENDOR_SUBCMD_CONFIGURE_TDLS = 143, }; @@ -1380,4 +1385,92 @@ enum qca_wlan_vendor_attr_encryption_test { QCA_WLAN_VENDOR_ATTR_ENCRYPTION_TEST_AFTER_LAST - 1 }; +/** + * enum qca_wlan_vendor_attr_tdls_configuration - Attributes for + * TDLS configuration to the host driver. + * + * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE: Configure the TDLS trigger + * mode in the host driver. enum qca_wlan_vendor_tdls_trigger_mode + * represents the different TDLS trigger modes. + * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD: Duration (u32) within + * which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD number + * of packets shall meet the criteria for implicit TDLS setup. + * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD: Number (u32) of Tx/Rx packets + * within a duration QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD + * to initiate a TDLS setup. + * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD: Time (u32) to initiate + * a TDLS Discovery to the peer. + * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT: Max number (u32) of + * discovery attempts to know the TDLS capability of the peer. A peer is + * marked as TDLS not capable if there is no response for all the attempts. + * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT: Represents a duration (u32) + * within which QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD + * number of TX / RX frames meet the criteria for TDLS teardown. + * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD: Minimum number (u32) + * of Tx/Rx packets within a duration + * QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT to tear down a TDLS link. + * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD: Threshold + * corresponding to the RSSI of the peer below which a TDLS setup is + * triggered. + * @QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD: Threshold + * corresponding to the RSSI of the peer above which a TDLS teardown is + * triggered. + */ +enum qca_wlan_vendor_attr_tdls_configuration { + QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_INVALID = 0, + QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE = 1, + + /* Attributes configuring the TDLS Implicit Trigger */ + QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_STATS_PERIOD = 2, + QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TX_THRESHOLD = 3, + QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_DISCOVERY_PERIOD = 4, + QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX_DISCOVERY_ATTEMPT = 5, + QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_TIMEOUT = 6, + QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IDLE_PACKET_THRESHOLD = 7, + QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_SETUP_RSSI_THRESHOLD = 8, + QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TEARDOWN_RSSI_THRESHOLD = 9, + + /* keep last */ + QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST, + QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_MAX = + QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_AFTER_LAST - 1 +}; + +/** + * enum qca_wlan_vendor_tdls_trigger_mode: Represents the TDLS trigger mode in + * the driver + * + * The following are the different values for + * QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_TRIGGER_MODE. + * + * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT: The trigger to initiate/teardown + * the TDLS connection to a respective peer comes from the user space. + * wpa_supplicant provides the commands TDLS_SETUP, TDLS_TEARDOWN, + * TDLS_DISCOVER to do this. + * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT: Host driver triggers this TDLS + * setup/teardown to the eligible peer once the configured criteria + * (such as TX/RX threshold, RSSI) is met. The attributes + * in QCA_WLAN_VENDOR_ATTR_TDLS_CONFIG_IMPLICIT_PARAMS correspond to + * the different configuration criteria for the TDLS trigger from the + * host driver. + * @QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL: Enables the driver to trigger + * the TDLS setup / teardown through the implicit mode only to the + * configured MAC addresses (wpa_supplicant, with tdls_external_control=1, + * configures the MAC address through TDLS_SETUP / TDLS_TEARDOWN commands). + * External mode works on top of the implicit mode. Thus the host driver + * is expected to configure in TDLS Implicit mode too to operate in + * External mode. + * Configuring External mode alone without Implicit mode is invalid. + * + * All the above implementations work as expected only when the host driver + * advertises the capability WPA_DRIVER_FLAGS_TDLS_EXTERNAL_SETUP - representing + * that the TDLS message exchange is not internal to the host driver, but + * depends on wpa_supplicant to do the message exchange. + */ +enum qca_wlan_vendor_tdls_trigger_mode { + QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXPLICIT = 1 << 0, + QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_IMPLICIT = 1 << 1, + QCA_WLAN_VENDOR_TDLS_TRIGGER_MODE_EXTERNAL = 1 << 2, +}; + #endif /* QCA_VENDOR_H */ |