diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 109 |
1 files changed, 95 insertions, 14 deletions
@@ -1,4 +1,4 @@ -# Copyright 2011 the V8 project authors. All rights reserved. +# Copyright 2012 the V8 project authors. All rights reserved. # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions are # met: @@ -27,11 +27,14 @@ # Variable default definitions. Override them by exporting them in your shell. -CXX ?= "g++" # For distcc: export CXX="distcc g++" -LINK ?= "g++" +CXX ?= g++ +LINK ?= g++ OUTDIR ?= out TESTJOBS ?= -j16 GYPFLAGS ?= +TESTFLAGS ?= +ANDROID_NDK_ROOT ?= +ANDROID_TOOL_PREFIX = $(ANDROID_NDK_ROOT)/toolchain/bin/arm-linux-androideabi # Special build flags. Use them like this: "make library=shared" @@ -50,6 +53,10 @@ endif ifeq ($(disassembler), on) GYPFLAGS += -Dv8_enable_disassembler=1 endif +# objectprint=on +ifeq ($(objectprint), on) + GYPFLAGS += -Dv8_object_print=1 +endif # snapshot=off ifeq ($(snapshot), off) GYPFLAGS += -Dv8_use_snapshot='false' @@ -68,18 +75,36 @@ ifeq ($(vfp3), off) else GYPFLAGS += -Dv8_can_use_vfp_instructions=true endif +# debuggersupport=off +ifeq ($(debuggersupport), off) + GYPFLAGS += -Dv8_enable_debugger_support=0 +endif # soname_version=1.2.3 ifdef soname_version GYPFLAGS += -Dsoname_version=$(soname_version) endif +# werror=no +ifeq ($(werror), no) + GYPFLAGS += -Dwerror='' +endif +# presubmit=no +ifeq ($(presubmit), no) + TESTFLAGS += --no-presubmit +endif +# strictaliasing=off (workaround for GCC-4.5) +ifeq ($(strictaliasing), off) + GYPFLAGS += -Dv8_no_strict_aliasing=1 +endif # ----------------- available targets: -------------------- # - "dependencies": pulls in external dependencies (currently: GYP) # - any arch listed in ARCHES (see below) # - any mode listed in MODES # - every combination <arch>.<mode>, e.g. "ia32.release" +# - "native": current host's architecture, release mode # - any of the above with .check appended, e.g. "ia32.release.check" -# - default (no target specified): build all ARCHES and MODES +# - "android": cross-compile for Android/ARM (release mode) +# - default (no target specified): build all DEFAULT_ARCHES and MODES # - "check": build all targets and run all tests # - "<arch>.clean" for any <arch> in ARCHES # - "clean": clean all ARCHES @@ -88,7 +113,8 @@ endif # Architectures and modes to be compiled. Consider these to be internal # variables, don't override them (use the targets instead). -ARCHES = ia32 x64 arm +ARCHES = ia32 x64 arm mips +DEFAULT_ARCHES = ia32 x64 arm MODES = release debug # List of files that trigger Makefile regeneration: @@ -103,16 +129,17 @@ CHECKS = $(addsuffix .check,$(BUILDS)) # File where previously used GYPFLAGS are stored. ENVFILE = $(OUTDIR)/environment -.PHONY: all check clean dependencies $(ENVFILE).new \ +.PHONY: all check clean dependencies $(ENVFILE).new native \ $(ARCHES) $(MODES) $(BUILDS) $(CHECKS) $(addsuffix .clean,$(ARCHES)) \ - $(addsuffix .check,$(MODES)) $(addsuffix .check,$(ARCHES)) + $(addsuffix .check,$(MODES)) $(addsuffix .check,$(ARCHES)) \ + must-set-ANDROID_NDK_ROOT # Target definitions. "all" is the default. all: $(MODES) # Compile targets. MODES and ARCHES are convenience targets. .SECONDEXPANSION: -$(MODES): $(addsuffix .$$@,$(ARCHES)) +$(MODES): $(addsuffix .$$@,$(DEFAULT_ARCHES)) $(ARCHES): $(addprefix $$@.,$(MODES)) @@ -124,21 +151,44 @@ $(BUILDS): $(OUTDIR)/Makefile-$$(basename $$@) python -c "print raw_input().capitalize()") \ builddir="$(shell pwd)/$(OUTDIR)/$@" +native: $(OUTDIR)/Makefile-native + @$(MAKE) -C "$(OUTDIR)" -f Makefile-native \ + CXX="$(CXX)" LINK="$(LINK)" BUILDTYPE=Release \ + builddir="$(shell pwd)/$(OUTDIR)/$@" + +# TODO(jkummerow): add "android.debug" when we need it. +android android.release: $(OUTDIR)/Makefile-android + @$(MAKE) -C "$(OUTDIR)" -f Makefile-android \ + CXX="$(ANDROID_TOOL_PREFIX)-g++" \ + AR="$(ANDROID_TOOL_PREFIX)-ar" \ + RANLIB="$(ANDROID_TOOL_PREFIX)-ranlib" \ + CC="$(ANDROID_TOOL_PREFIX)-gcc" \ + LD="$(ANDROID_TOOL_PREFIX)-ld" \ + LINK="$(ANDROID_TOOL_PREFIX)-g++" \ + BUILDTYPE=Release \ + builddir="$(shell pwd)/$(OUTDIR)/android.release" + # Test targets. check: all - @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) + @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \ + --arch=$(shell echo $(DEFAULT_ARCHES) | sed -e 's/ /,/g') \ + $(TESTFLAGS) $(addsuffix .check,$(MODES)): $$(basename $$@) @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \ - --mode=$(basename $@) + --mode=$(basename $@) $(TESTFLAGS) $(addsuffix .check,$(ARCHES)): $$(basename $$@) @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \ - --arch=$(basename $@) + --arch=$(basename $@) $(TESTFLAGS) $(CHECKS): $$(basename $$@) @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \ - --arch-and-mode=$(basename $@) + --arch-and-mode=$(basename $@) $(TESTFLAGS) + +native.check: native + @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR)/native \ + --arch-and-mode=. $(TESTFLAGS) # Clean targets. You can clean each architecture individually, or everything. $(addsuffix .clean,$(ARCHES)): @@ -147,7 +197,17 @@ $(addsuffix .clean,$(ARCHES)): rm -rf $(OUTDIR)/$(basename $@).debug find $(OUTDIR) -regex '.*\(host\|target\)-$(basename $@)\.mk' -delete -clean: $(addsuffix .clean,$(ARCHES)) +native.clean: + rm -f $(OUTDIR)/Makefile-native + rm -rf $(OUTDIR)/native + find $(OUTDIR) -regex '.*\(host\|target\)-native\.mk' -delete + +android.clean: + rm -f $(OUTDIR)/Makefile-android + rm -rf $(OUTDIR)/android.release + find $(OUTDIR) -regex '.*\(host\|target\)-android\.mk' -delete + +clean: $(addsuffix .clean,$(ARCHES)) native.clean # GYP file generation targets. $(OUTDIR)/Makefile-ia32: $(GYPFILES) $(ENVFILE) @@ -160,11 +220,32 @@ $(OUTDIR)/Makefile-x64: $(GYPFILES) $(ENVFILE) -Ibuild/standalone.gypi --depth=. -Dtarget_arch=x64 \ -S-x64 $(GYPFLAGS) -$(OUTDIR)/Makefile-arm: $(GYPFILES) $(ENVFILE) +$(OUTDIR)/Makefile-arm: $(GYPFILES) $(ENVFILE) build/armu.gypi build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \ -Ibuild/standalone.gypi --depth=. -Ibuild/armu.gypi \ -S-arm $(GYPFLAGS) +$(OUTDIR)/Makefile-mips: $(GYPFILES) $(ENVFILE) build/mipsu.gypi + build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \ + -Ibuild/standalone.gypi --depth=. -Ibuild/mipsu.gypi \ + -S-mips $(GYPFLAGS) + +$(OUTDIR)/Makefile-native: $(GYPFILES) $(ENVFILE) + build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \ + -Ibuild/standalone.gypi --depth=. -S-native $(GYPFLAGS) + +$(OUTDIR)/Makefile-android: $(GYPFILES) $(ENVFILE) build/android.gypi \ + must-set-ANDROID_NDK_ROOT + CC="${ANDROID_TOOL_PREFIX}-gcc" \ + build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \ + -Ibuild/standalone.gypi --depth=. -Ibuild/android.gypi \ + -S-android $(GYPFLAGS) + +must-set-ANDROID_NDK_ROOT: +ifndef ANDROID_NDK_ROOT + $(error ANDROID_NDK_ROOT is not set) +endif + # Replaces the old with the new environment file if they're different, which # will trigger GYP to regenerate Makefiles. $(ENVFILE): $(ENVFILE).new |