diff options
Diffstat (limited to 'libdex/OpCode.h')
| -rw-r--r-- | libdex/OpCode.h | 653 |
1 files changed, 653 insertions, 0 deletions
diff --git a/libdex/OpCode.h b/libdex/OpCode.h new file mode 100644 index 000000000..d38947290 --- /dev/null +++ b/libdex/OpCode.h @@ -0,0 +1,653 @@ +/* + * Copyright (C) 2008 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/* + * Dalvik opcode enumeration. + */ +#ifndef _LIBDEX_OPCODE +#define _LIBDEX_OPCODE + +/* + * If you add, delete, or renumber instructions, you need to change things + * in various places. Renumbering really only affects the "unused" opcodes, + * which are given explicit enumeration values to make it easier to find + * the places in the code that need to be updated when making changes -- + * if you replace "OP_UNUSED_2D" and neglect to update a switch statement, + * the compiler will complain about an unknown value. + * + * Opcode definitions and attributes: + * - update the OpCode enum below + * - update the "goto table" definition macro, DEFINE_GOTO_TABLE(), below + * - update the instruction info table generators and (if you changed an + * instruction format) instruction decoder in InstrUtils.c + * - update the instruction format list in InstrUtils.h, if necessary + * - update the parallel definitions in the class dalvik.bytecode.Opcodes + * + * Interpreter: + * - implement/update the instruction in C in mterp/c/... + * - verify new code by running with "dalvik.vm.execution-mode = + * int:portable" or "-Xint:portable" + * - implement/update the instruction in ARM in mterp/armv5/... + * - verify by enabling ARM handler for that instruction in mterp config + * and running int:fast as above + * - repeat for other platforms (x86, ...) + * (see notes in mterp/ReadMe.txt for rebuilding instructions) + * + * Verifier / optimizer: + * - update some stuff in analysis/DexOptimize.c, analysis/DexVerify.c, + * and/or analysis/CodeVerify.c as needed + * - verify by running with verifier enabled (it's on by default) + * + * Tools: + * - update the OpCodeNames table in dexdump/OpCodeNames.c + * - update dexdump/DexDump.c if an instruction format has changed + * + * Note: The Dalvik VM tests (in the tests subdirectory) provide a convenient + * way to test most of the above without doing any rebuilds. In particular, + * test 003-omnibus-opcodes will exercise most of the opcodes. + */ + +/* + * Dalvik opcode list. + */ +typedef enum OpCode { + OP_NOP = 0x00, + + OP_MOVE = 0x01, + OP_MOVE_FROM16 = 0x02, + OP_MOVE_16 = 0x03, + OP_MOVE_WIDE = 0x04, + OP_MOVE_WIDE_FROM16 = 0x05, + OP_MOVE_WIDE_16 = 0x06, + OP_MOVE_OBJECT = 0x07, + OP_MOVE_OBJECT_FROM16 = 0x08, + OP_MOVE_OBJECT_16 = 0x09, + + OP_MOVE_RESULT = 0x0a, + OP_MOVE_RESULT_WIDE = 0x0b, + OP_MOVE_RESULT_OBJECT = 0x0c, + OP_MOVE_EXCEPTION = 0x0d, + + OP_RETURN_VOID = 0x0e, + OP_RETURN = 0x0f, + OP_RETURN_WIDE = 0x10, + OP_RETURN_OBJECT = 0x11, + + OP_CONST_4 = 0x12, + OP_CONST_16 = 0x13, + OP_CONST = 0x14, + OP_CONST_HIGH16 = 0x15, + OP_CONST_WIDE_16 = 0x16, + OP_CONST_WIDE_32 = 0x17, + OP_CONST_WIDE = 0x18, + OP_CONST_WIDE_HIGH16 = 0x19, + OP_CONST_STRING = 0x1a, + OP_CONST_STRING_JUMBO = 0x1b, + OP_CONST_CLASS = 0x1c, + + OP_MONITOR_ENTER = 0x1d, + OP_MONITOR_EXIT = 0x1e, + + OP_CHECK_CAST = 0x1f, + OP_INSTANCE_OF = 0x20, + + OP_ARRAY_LENGTH = 0x21, + + OP_NEW_INSTANCE = 0x22, + OP_NEW_ARRAY = 0x23, + + OP_FILLED_NEW_ARRAY = 0x24, + OP_FILLED_NEW_ARRAY_RANGE = 0x25, + OP_FILL_ARRAY_DATA = 0x26, + + OP_THROW = 0x27, + OP_GOTO = 0x28, + OP_GOTO_16 = 0x29, + OP_GOTO_32 = 0x2a, + OP_PACKED_SWITCH = 0x2b, + OP_SPARSE_SWITCH = 0x2c, + + OP_CMPL_FLOAT = 0x2d, + OP_CMPG_FLOAT = 0x2e, + OP_CMPL_DOUBLE = 0x2f, + OP_CMPG_DOUBLE = 0x30, + OP_CMP_LONG = 0x31, + + OP_IF_EQ = 0x32, + OP_IF_NE = 0x33, + OP_IF_LT = 0x34, + OP_IF_GE = 0x35, + OP_IF_GT = 0x36, + OP_IF_LE = 0x37, + OP_IF_EQZ = 0x38, + OP_IF_NEZ = 0x39, + OP_IF_LTZ = 0x3a, + OP_IF_GEZ = 0x3b, + OP_IF_GTZ = 0x3c, + OP_IF_LEZ = 0x3d, + + OP_UNUSED_3E = 0x3e, + OP_UNUSED_3F = 0x3f, + OP_UNUSED_40 = 0x40, + OP_UNUSED_41 = 0x41, + OP_UNUSED_42 = 0x42, + OP_UNUSED_43 = 0x43, + + OP_AGET = 0x44, + OP_AGET_WIDE = 0x45, + OP_AGET_OBJECT = 0x46, + OP_AGET_BOOLEAN = 0x47, + OP_AGET_BYTE = 0x48, + OP_AGET_CHAR = 0x49, + OP_AGET_SHORT = 0x4a, + OP_APUT = 0x4b, + OP_APUT_WIDE = 0x4c, + OP_APUT_OBJECT = 0x4d, + OP_APUT_BOOLEAN = 0x4e, + OP_APUT_BYTE = 0x4f, + OP_APUT_CHAR = 0x50, + OP_APUT_SHORT = 0x51, + + OP_IGET = 0x52, + OP_IGET_WIDE = 0x53, + OP_IGET_OBJECT = 0x54, + OP_IGET_BOOLEAN = 0x55, + OP_IGET_BYTE = 0x56, + OP_IGET_CHAR = 0x57, + OP_IGET_SHORT = 0x58, + OP_IPUT = 0x59, + OP_IPUT_WIDE = 0x5a, + OP_IPUT_OBJECT = 0x5b, + OP_IPUT_BOOLEAN = 0x5c, + OP_IPUT_BYTE = 0x5d, + OP_IPUT_CHAR = 0x5e, + OP_IPUT_SHORT = 0x5f, + + OP_SGET = 0x60, + OP_SGET_WIDE = 0x61, + OP_SGET_OBJECT = 0x62, + OP_SGET_BOOLEAN = 0x63, + OP_SGET_BYTE = 0x64, + OP_SGET_CHAR = 0x65, + OP_SGET_SHORT = 0x66, + OP_SPUT = 0x67, + OP_SPUT_WIDE = 0x68, + OP_SPUT_OBJECT = 0x69, + OP_SPUT_BOOLEAN = 0x6a, + OP_SPUT_BYTE = 0x6b, + OP_SPUT_CHAR = 0x6c, + OP_SPUT_SHORT = 0x6d, + + OP_INVOKE_VIRTUAL = 0x6e, + OP_INVOKE_SUPER = 0x6f, + OP_INVOKE_DIRECT = 0x70, + OP_INVOKE_STATIC = 0x71, + OP_INVOKE_INTERFACE = 0x72, + + OP_UNUSED_73 = 0x73, + + OP_INVOKE_VIRTUAL_RANGE = 0x74, + OP_INVOKE_SUPER_RANGE = 0x75, + OP_INVOKE_DIRECT_RANGE = 0x76, + OP_INVOKE_STATIC_RANGE = 0x77, + OP_INVOKE_INTERFACE_RANGE = 0x78, + + OP_UNUSED_79 = 0x79, + OP_UNUSED_7A = 0x7a, + + OP_NEG_INT = 0x7b, + OP_NOT_INT = 0x7c, + OP_NEG_LONG = 0x7d, + OP_NOT_LONG = 0x7e, + OP_NEG_FLOAT = 0x7f, + OP_NEG_DOUBLE = 0x80, + OP_INT_TO_LONG = 0x81, + OP_INT_TO_FLOAT = 0x82, + OP_INT_TO_DOUBLE = 0x83, + OP_LONG_TO_INT = 0x84, + OP_LONG_TO_FLOAT = 0x85, + OP_LONG_TO_DOUBLE = 0x86, + OP_FLOAT_TO_INT = 0x87, + OP_FLOAT_TO_LONG = 0x88, + OP_FLOAT_TO_DOUBLE = 0x89, + OP_DOUBLE_TO_INT = 0x8a, + OP_DOUBLE_TO_LONG = 0x8b, + OP_DOUBLE_TO_FLOAT = 0x8c, + OP_INT_TO_BYTE = 0x8d, + OP_INT_TO_CHAR = 0x8e, + OP_INT_TO_SHORT = 0x8f, + + OP_ADD_INT = 0x90, + OP_SUB_INT = 0x91, + OP_MUL_INT = 0x92, + OP_DIV_INT = 0x93, + OP_REM_INT = 0x94, + OP_AND_INT = 0x95, + OP_OR_INT = 0x96, + OP_XOR_INT = 0x97, + OP_SHL_INT = 0x98, + OP_SHR_INT = 0x99, + OP_USHR_INT = 0x9a, + + OP_ADD_LONG = 0x9b, + OP_SUB_LONG = 0x9c, + OP_MUL_LONG = 0x9d, + OP_DIV_LONG = 0x9e, + OP_REM_LONG = 0x9f, + OP_AND_LONG = 0xa0, + OP_OR_LONG = 0xa1, + OP_XOR_LONG = 0xa2, + OP_SHL_LONG = 0xa3, + OP_SHR_LONG = 0xa4, + OP_USHR_LONG = 0xa5, + + OP_ADD_FLOAT = 0xa6, + OP_SUB_FLOAT = 0xa7, + OP_MUL_FLOAT = 0xa8, + OP_DIV_FLOAT = 0xa9, + OP_REM_FLOAT = 0xaa, + OP_ADD_DOUBLE = 0xab, + OP_SUB_DOUBLE = 0xac, + OP_MUL_DOUBLE = 0xad, + OP_DIV_DOUBLE = 0xae, + OP_REM_DOUBLE = 0xaf, + + OP_ADD_INT_2ADDR = 0xb0, + OP_SUB_INT_2ADDR = 0xb1, + OP_MUL_INT_2ADDR = 0xb2, + OP_DIV_INT_2ADDR = 0xb3, + OP_REM_INT_2ADDR = 0xb4, + OP_AND_INT_2ADDR = 0xb5, + OP_OR_INT_2ADDR = 0xb6, + OP_XOR_INT_2ADDR = 0xb7, + OP_SHL_INT_2ADDR = 0xb8, + OP_SHR_INT_2ADDR = 0xb9, + OP_USHR_INT_2ADDR = 0xba, + + OP_ADD_LONG_2ADDR = 0xbb, + OP_SUB_LONG_2ADDR = 0xbc, + OP_MUL_LONG_2ADDR = 0xbd, + OP_DIV_LONG_2ADDR = 0xbe, + OP_REM_LONG_2ADDR = 0xbf, + OP_AND_LONG_2ADDR = 0xc0, + OP_OR_LONG_2ADDR = 0xc1, + OP_XOR_LONG_2ADDR = 0xc2, + OP_SHL_LONG_2ADDR = 0xc3, + OP_SHR_LONG_2ADDR = 0xc4, + OP_USHR_LONG_2ADDR = 0xc5, + + OP_ADD_FLOAT_2ADDR = 0xc6, + OP_SUB_FLOAT_2ADDR = 0xc7, + OP_MUL_FLOAT_2ADDR = 0xc8, + OP_DIV_FLOAT_2ADDR = 0xc9, + OP_REM_FLOAT_2ADDR = 0xca, + OP_ADD_DOUBLE_2ADDR = 0xcb, + OP_SUB_DOUBLE_2ADDR = 0xcc, + OP_MUL_DOUBLE_2ADDR = 0xcd, + OP_DIV_DOUBLE_2ADDR = 0xce, + OP_REM_DOUBLE_2ADDR = 0xcf, + + OP_ADD_INT_LIT16 = 0xd0, + OP_RSUB_INT = 0xd1, /* no _LIT16 suffix for this */ + OP_MUL_INT_LIT16 = 0xd2, + OP_DIV_INT_LIT16 = 0xd3, + OP_REM_INT_LIT16 = 0xd4, + OP_AND_INT_LIT16 = 0xd5, + OP_OR_INT_LIT16 = 0xd6, + OP_XOR_INT_LIT16 = 0xd7, + + OP_ADD_INT_LIT8 = 0xd8, + OP_RSUB_INT_LIT8 = 0xd9, + OP_MUL_INT_LIT8 = 0xda, + OP_DIV_INT_LIT8 = 0xdb, + OP_REM_INT_LIT8 = 0xdc, + OP_AND_INT_LIT8 = 0xdd, + OP_OR_INT_LIT8 = 0xde, + OP_XOR_INT_LIT8 = 0xdf, + OP_SHL_INT_LIT8 = 0xe0, + OP_SHR_INT_LIT8 = 0xe1, + OP_USHR_INT_LIT8 = 0xe2, + + OP_UNUSED_E3 = 0xe3, + OP_UNUSED_E4 = 0xe4, + OP_UNUSED_E5 = 0xe5, + OP_UNUSED_E6 = 0xe6, + OP_UNUSED_E7 = 0xe7, + OP_UNUSED_E8 = 0xe8, + OP_UNUSED_E9 = 0xe9, + OP_UNUSED_EA = 0xea, + OP_UNUSED_EB = 0xeb, + OP_UNUSED_EC = 0xec, + OP_UNUSED_ED = 0xed, + + /* optimizer output -- these are never generated by "dx" */ + OP_EXECUTE_INLINE = 0xee, + OP_UNUSED_EF = 0xef, /* OP_EXECUTE_INLINE_RANGE? */ + + OP_INVOKE_DIRECT_EMPTY = 0xf0, + OP_UNUSED_F1 = 0xf1, /* OP_INVOKE_DIRECT_EMPTY_RANGE? */ + OP_IGET_QUICK = 0xf2, + OP_IGET_WIDE_QUICK = 0xf3, + OP_IGET_OBJECT_QUICK = 0xf4, + OP_IPUT_QUICK = 0xf5, + OP_IPUT_WIDE_QUICK = 0xf6, + OP_IPUT_OBJECT_QUICK = 0xf7, + + OP_INVOKE_VIRTUAL_QUICK = 0xf8, + OP_INVOKE_VIRTUAL_QUICK_RANGE = 0xf9, + OP_INVOKE_SUPER_QUICK = 0xfa, + OP_INVOKE_SUPER_QUICK_RANGE = 0xfb, + OP_UNUSED_FC = 0xfc, /* OP_INVOKE_DIRECT_QUICK? */ + OP_UNUSED_FD = 0xfd, /* OP_INVOKE_DIRECT_QUICK_RANGE? */ + OP_UNUSED_FE = 0xfe, /* OP_INVOKE_INTERFACE_QUICK? */ + OP_UNUSED_FF = 0xff, /* OP_INVOKE_INTERFACE_QUICK_RANGE*/ +} OpCode; + +#define kNumDalvikInstructions 256 + +/* + * Switch-statement signatures are a "NOP" followed by a code. (A true NOP + * is 0x0000.) + */ +#define kPackedSwitchSignature 0x0100 +#define kSparseSwitchSignature 0x0200 +#define kArrayDataSignature 0x0300 + +/* + * Macro used to generate computed goto tables for the C interpreter. + * + * The labels here must match up with the labels in the interpreter + * implementation. There is no direct connection between these and the + * numeric definitions above, but if the two get out of sync strange things + * will happen. + */ +#define DEFINE_GOTO_TABLE(_name) \ + static const void* _name[kNumDalvikInstructions] = { \ + /* 00..0f */ \ + H(OP_NOP), \ + H(OP_MOVE), \ + H(OP_MOVE_FROM16), \ + H(OP_MOVE_16), \ + H(OP_MOVE_WIDE), \ + H(OP_MOVE_WIDE_FROM16), \ + H(OP_MOVE_WIDE_16), \ + H(OP_MOVE_OBJECT), \ + H(OP_MOVE_OBJECT_FROM16), \ + H(OP_MOVE_OBJECT_16), \ + H(OP_MOVE_RESULT), \ + H(OP_MOVE_RESULT_WIDE), \ + H(OP_MOVE_RESULT_OBJECT), \ + H(OP_MOVE_EXCEPTION), \ + H(OP_RETURN_VOID), \ + H(OP_RETURN), \ + /* 10..1f */ \ + H(OP_RETURN_WIDE), \ + H(OP_RETURN_OBJECT), \ + H(OP_CONST_4), \ + H(OP_CONST_16), \ + H(OP_CONST), \ + H(OP_CONST_HIGH16), \ + H(OP_CONST_WIDE_16), \ + H(OP_CONST_WIDE_32), \ + H(OP_CONST_WIDE), \ + H(OP_CONST_WIDE_HIGH16), \ + H(OP_CONST_STRING), \ + H(OP_CONST_STRING_JUMBO), \ + H(OP_CONST_CLASS), \ + H(OP_MONITOR_ENTER), \ + H(OP_MONITOR_EXIT), \ + H(OP_CHECK_CAST), \ + /* 20..2f */ \ + H(OP_INSTANCE_OF), \ + H(OP_ARRAY_LENGTH), \ + H(OP_NEW_INSTANCE), \ + H(OP_NEW_ARRAY), \ + H(OP_FILLED_NEW_ARRAY), \ + H(OP_FILLED_NEW_ARRAY_RANGE), \ + H(OP_FILL_ARRAY_DATA), \ + H(OP_THROW), \ + H(OP_GOTO), \ + H(OP_GOTO_16), \ + H(OP_GOTO_32), \ + H(OP_PACKED_SWITCH), \ + H(OP_SPARSE_SWITCH), \ + H(OP_CMPL_FLOAT), \ + H(OP_CMPG_FLOAT), \ + H(OP_CMPL_DOUBLE), \ + /* 30..3f */ \ + H(OP_CMPG_DOUBLE), \ + H(OP_CMP_LONG), \ + H(OP_IF_EQ), \ + H(OP_IF_NE), \ + H(OP_IF_LT), \ + H(OP_IF_GE), \ + H(OP_IF_GT), \ + H(OP_IF_LE), \ + H(OP_IF_EQZ), \ + H(OP_IF_NEZ), \ + H(OP_IF_LTZ), \ + H(OP_IF_GEZ), \ + H(OP_IF_GTZ), \ + H(OP_IF_LEZ), \ + H(OP_UNUSED_3E), \ + H(OP_UNUSED_3F), \ + /* 40..4f */ \ + H(OP_UNUSED_40), \ + H(OP_UNUSED_41), \ + H(OP_UNUSED_42), \ + H(OP_UNUSED_43), \ + H(OP_AGET), \ + H(OP_AGET_WIDE), \ + H(OP_AGET_OBJECT), \ + H(OP_AGET_BOOLEAN), \ + H(OP_AGET_BYTE), \ + H(OP_AGET_CHAR), \ + H(OP_AGET_SHORT), \ + H(OP_APUT), \ + H(OP_APUT_WIDE), \ + H(OP_APUT_OBJECT), \ + H(OP_APUT_BOOLEAN), \ + H(OP_APUT_BYTE), \ + /* 50..5f */ \ + H(OP_APUT_CHAR), \ + H(OP_APUT_SHORT), \ + H(OP_IGET), \ + H(OP_IGET_WIDE), \ + H(OP_IGET_OBJECT), \ + H(OP_IGET_BOOLEAN), \ + H(OP_IGET_BYTE), \ + H(OP_IGET_CHAR), \ + H(OP_IGET_SHORT), \ + H(OP_IPUT), \ + H(OP_IPUT_WIDE), \ + H(OP_IPUT_OBJECT), \ + H(OP_IPUT_BOOLEAN), \ + H(OP_IPUT_BYTE), \ + H(OP_IPUT_CHAR), \ + H(OP_IPUT_SHORT), \ + /* 60..6f */ \ + H(OP_SGET), \ + H(OP_SGET_WIDE), \ + H(OP_SGET_OBJECT), \ + H(OP_SGET_BOOLEAN), \ + H(OP_SGET_BYTE), \ + H(OP_SGET_CHAR), \ + H(OP_SGET_SHORT), \ + H(OP_SPUT), \ + H(OP_SPUT_WIDE), \ + H(OP_SPUT_OBJECT), \ + H(OP_SPUT_BOOLEAN), \ + H(OP_SPUT_BYTE), \ + H(OP_SPUT_CHAR), \ + H(OP_SPUT_SHORT), \ + H(OP_INVOKE_VIRTUAL), \ + H(OP_INVOKE_SUPER), \ + /* 70..7f */ \ + H(OP_INVOKE_DIRECT), \ + H(OP_INVOKE_STATIC), \ + H(OP_INVOKE_INTERFACE), \ + H(OP_UNUSED_73), \ + H(OP_INVOKE_VIRTUAL_RANGE), \ + H(OP_INVOKE_SUPER_RANGE), \ + H(OP_INVOKE_DIRECT_RANGE), \ + H(OP_INVOKE_STATIC_RANGE), \ + H(OP_INVOKE_INTERFACE_RANGE), \ + H(OP_UNUSED_79), \ + H(OP_UNUSED_7A), \ + H(OP_NEG_INT), \ + H(OP_NOT_INT), \ + H(OP_NEG_LONG), \ + H(OP_NOT_LONG), \ + H(OP_NEG_FLOAT), \ + /* 80..8f */ \ + H(OP_NEG_DOUBLE), \ + H(OP_INT_TO_LONG), \ + H(OP_INT_TO_FLOAT), \ + H(OP_INT_TO_DOUBLE), \ + H(OP_LONG_TO_INT), \ + H(OP_LONG_TO_FLOAT), \ + H(OP_LONG_TO_DOUBLE), \ + H(OP_FLOAT_TO_INT), \ + H(OP_FLOAT_TO_LONG), \ + H(OP_FLOAT_TO_DOUBLE), \ + H(OP_DOUBLE_TO_INT), \ + H(OP_DOUBLE_TO_LONG), \ + H(OP_DOUBLE_TO_FLOAT), \ + H(OP_INT_TO_BYTE), \ + H(OP_INT_TO_CHAR), \ + H(OP_INT_TO_SHORT), \ + /* 90..9f */ \ + H(OP_ADD_INT), \ + H(OP_SUB_INT), \ + H(OP_MUL_INT), \ + H(OP_DIV_INT), \ + H(OP_REM_INT), \ + H(OP_AND_INT), \ + H(OP_OR_INT), \ + H(OP_XOR_INT), \ + H(OP_SHL_INT), \ + H(OP_SHR_INT), \ + H(OP_USHR_INT), \ + H(OP_ADD_LONG), \ + H(OP_SUB_LONG), \ + H(OP_MUL_LONG), \ + H(OP_DIV_LONG), \ + H(OP_REM_LONG), \ + /* a0..af */ \ + H(OP_AND_LONG), \ + H(OP_OR_LONG), \ + H(OP_XOR_LONG), \ + H(OP_SHL_LONG), \ + H(OP_SHR_LONG), \ + H(OP_USHR_LONG), \ + H(OP_ADD_FLOAT), \ + H(OP_SUB_FLOAT), \ + H(OP_MUL_FLOAT), \ + H(OP_DIV_FLOAT), \ + H(OP_REM_FLOAT), \ + H(OP_ADD_DOUBLE), \ + H(OP_SUB_DOUBLE), \ + H(OP_MUL_DOUBLE), \ + H(OP_DIV_DOUBLE), \ + H(OP_REM_DOUBLE), \ + /* b0..bf */ \ + H(OP_ADD_INT_2ADDR), \ + H(OP_SUB_INT_2ADDR), \ + H(OP_MUL_INT_2ADDR), \ + H(OP_DIV_INT_2ADDR), \ + H(OP_REM_INT_2ADDR), \ + H(OP_AND_INT_2ADDR), \ + H(OP_OR_INT_2ADDR), \ + H(OP_XOR_INT_2ADDR), \ + H(OP_SHL_INT_2ADDR), \ + H(OP_SHR_INT_2ADDR), \ + H(OP_USHR_INT_2ADDR), \ + H(OP_ADD_LONG_2ADDR), \ + H(OP_SUB_LONG_2ADDR), \ + H(OP_MUL_LONG_2ADDR), \ + H(OP_DIV_LONG_2ADDR), \ + H(OP_REM_LONG_2ADDR), \ + /* c0..cf */ \ + H(OP_AND_LONG_2ADDR), \ + H(OP_OR_LONG_2ADDR), \ + H(OP_XOR_LONG_2ADDR), \ + H(OP_SHL_LONG_2ADDR), \ + H(OP_SHR_LONG_2ADDR), \ + H(OP_USHR_LONG_2ADDR), \ + H(OP_ADD_FLOAT_2ADDR), \ + H(OP_SUB_FLOAT_2ADDR), \ + H(OP_MUL_FLOAT_2ADDR), \ + H(OP_DIV_FLOAT_2ADDR), \ + H(OP_REM_FLOAT_2ADDR), \ + H(OP_ADD_DOUBLE_2ADDR), \ + H(OP_SUB_DOUBLE_2ADDR), \ + H(OP_MUL_DOUBLE_2ADDR), \ + H(OP_DIV_DOUBLE_2ADDR), \ + H(OP_REM_DOUBLE_2ADDR), \ + /* d0..df */ \ + H(OP_ADD_INT_LIT16), \ + H(OP_RSUB_INT), \ + H(OP_MUL_INT_LIT16), \ + H(OP_DIV_INT_LIT16), \ + H(OP_REM_INT_LIT16), \ + H(OP_AND_INT_LIT16), \ + H(OP_OR_INT_LIT16), \ + H(OP_XOR_INT_LIT16), \ + H(OP_ADD_INT_LIT8), \ + H(OP_RSUB_INT_LIT8), \ + H(OP_MUL_INT_LIT8), \ + H(OP_DIV_INT_LIT8), \ + H(OP_REM_INT_LIT8), \ + H(OP_AND_INT_LIT8), \ + H(OP_OR_INT_LIT8), \ + H(OP_XOR_INT_LIT8), \ + /* e0..ef */ \ + H(OP_SHL_INT_LIT8), \ + H(OP_SHR_INT_LIT8), \ + H(OP_USHR_INT_LIT8), \ + H(OP_UNUSED_E3), \ + H(OP_UNUSED_E4), \ + H(OP_UNUSED_E5), \ + H(OP_UNUSED_E6), \ + H(OP_UNUSED_E7), \ + H(OP_UNUSED_E8), \ + H(OP_UNUSED_E9), \ + H(OP_UNUSED_EA), \ + H(OP_UNUSED_EB), \ + H(OP_UNUSED_EC), \ + H(OP_UNUSED_ED), \ + H(OP_EXECUTE_INLINE), \ + H(OP_UNUSED_EF), \ + /* f0..ff */ \ + H(OP_INVOKE_DIRECT_EMPTY), \ + H(OP_UNUSED_F1), \ + H(OP_IGET_QUICK), \ + H(OP_IGET_WIDE_QUICK), \ + H(OP_IGET_OBJECT_QUICK), \ + H(OP_IPUT_QUICK), \ + H(OP_IPUT_WIDE_QUICK), \ + H(OP_IPUT_OBJECT_QUICK), \ + H(OP_INVOKE_VIRTUAL_QUICK), \ + H(OP_INVOKE_VIRTUAL_QUICK_RANGE), \ + H(OP_INVOKE_SUPER_QUICK), \ + H(OP_INVOKE_SUPER_QUICK_RANGE), \ + H(OP_UNUSED_FC), \ + H(OP_UNUSED_FD), \ + H(OP_UNUSED_FE), \ + H(OP_UNUSED_FF), \ + }; + +#endif /*_LIBDEX_OPCODE*/ |