aboutsummaryrefslogtreecommitdiffstats
path: root/include/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'include/drivers')
-rw-r--r--include/drivers/st/stm32_i2c.h258
-rw-r--r--include/drivers/st/stm32mp_pmic.h37
2 files changed, 173 insertions, 122 deletions
diff --git a/include/drivers/st/stm32_i2c.h b/include/drivers/st/stm32_i2c.h
index de2ca59c8..170d4cf81 100644
--- a/include/drivers/st/stm32_i2c.h
+++ b/include/drivers/st/stm32_i2c.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2018, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2016-2019, STMicroelectronics - All Rights Reserved
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -111,94 +111,113 @@
#define I2C_ICR_TIMOUTCF BIT(12)
#define I2C_ICR_ALERTCF BIT(13)
-struct stm32_i2c_init_s {
- uint32_t timing; /* Specifies the I2C_TIMINGR_register value
- * This parameter is calculated by referring
- * to I2C initialization section in Reference
- * manual.
- */
-
- uint32_t own_address1; /* Specifies the first device own address.
- * This parameter can be a 7-bit or 10-bit
- * address.
- */
-
- uint32_t addressing_mode; /* Specifies if 7-bit or 10-bit addressing
- * mode is selected.
- * This parameter can be a value of @ref
- * I2C_ADDRESSING_MODE.
- */
-
- uint32_t dual_address_mode; /* Specifies if dual addressing mode is
- * selected.
- * This parameter can be a value of @ref
- * I2C_DUAL_ADDRESSING_MODE.
- */
-
- uint32_t own_address2; /* Specifies the second device own address
- * if dual addressing mode is selected.
- * This parameter can be a 7-bit address.
- */
-
- uint32_t own_address2_masks; /* Specifies the acknowledge mask address
- * second device own address if dual
- * addressing mode is selected.
- * This parameter can be a value of @ref
- * I2C_OWN_ADDRESS2_MASKS.
- */
-
- uint32_t general_call_mode; /* Specifies if general call mode is
- * selected.
- * This parameter can be a value of @ref
- * I2C_GENERAL_CALL_ADDRESSING_MODE.
- */
-
- uint32_t no_stretch_mode; /* Specifies if nostretch mode is
- * selected.
- * This parameter can be a value of @ref
- * I2C_NOSTRETCH_MODE.
- */
+enum i2c_speed_e {
+ I2C_SPEED_STANDARD, /* 100 kHz */
+ I2C_SPEED_FAST, /* 400 kHz */
+ I2C_SPEED_FAST_PLUS, /* 1 MHz */
+};
+
+#define STANDARD_RATE 100000
+#define FAST_RATE 400000
+#define FAST_PLUS_RATE 1000000
+struct stm32_i2c_init_s {
+ uint32_t own_address1; /*
+ * Specifies the first device own
+ * address. This parameter can be a
+ * 7-bit or 10-bit address.
+ */
+
+ uint32_t addressing_mode; /*
+ * Specifies if 7-bit or 10-bit
+ * addressing mode is selected.
+ * This parameter can be a value of
+ * @ref I2C_ADDRESSING_MODE.
+ */
+
+ uint32_t dual_address_mode; /*
+ * Specifies if dual addressing mode is
+ * selected.
+ * This parameter can be a value of @ref
+ * I2C_DUAL_ADDRESSING_MODE.
+ */
+
+ uint32_t own_address2; /*
+ * Specifies the second device own
+ * address if dual addressing mode is
+ * selected. This parameter can be a
+ * 7-bit address.
+ */
+
+ uint32_t own_address2_masks; /*
+ * Specifies the acknowledge mask
+ * address second device own address
+ * if dual addressing mode is selected
+ * This parameter can be a value of @ref
+ * I2C_OWN_ADDRESS2_MASKS.
+ */
+
+ uint32_t general_call_mode; /*
+ * Specifies if general call mode is
+ * selected.
+ * This parameter can be a value of @ref
+ * I2C_GENERAL_CALL_ADDRESSING_MODE.
+ */
+
+ uint32_t no_stretch_mode; /*
+ * Specifies if nostretch mode is
+ * selected.
+ * This parameter can be a value of @ref
+ * I2C_NOSTRETCH_MODE.
+ */
+
+ uint32_t rise_time; /*
+ * Specifies the SCL clock pin rising
+ * time in nanoseconds.
+ */
+
+ uint32_t fall_time; /*
+ * Specifies the SCL clock pin falling
+ * time in nanoseconds.
+ */
+
+ enum i2c_speed_e speed_mode; /*
+ * Specifies the I2C clock source
+ * frequency mode.
+ * This parameter can be a value of @ref
+ * i2c_speed_mode_e.
+ */
+
+ int analog_filter; /*
+ * Specifies if the I2C analog noise
+ * filter is selected.
+ * This parameter can be 0 (filter
+ * off), all other values mean filter
+ * on.
+ */
+
+ uint8_t digital_filter_coef; /*
+ * Specifies the I2C digital noise
+ * filter coefficient.
+ * This parameter can be a value
+ * between 0 and
+ * STM32_I2C_DIGITAL_FILTER_MAX.
+ */
};
enum i2c_state_e {
- I2C_STATE_RESET = 0x00U, /* Peripheral is not yet
- * initialized.
- */
- I2C_STATE_READY = 0x20U, /* Peripheral Initialized
- * and ready for use.
- */
- I2C_STATE_BUSY = 0x24U, /* An internal process is
- * ongoing.
- */
- I2C_STATE_BUSY_TX = 0x21U, /* Data Transmission process
- * is ongoing.
- */
- I2C_STATE_BUSY_RX = 0x22U, /* Data Reception process
- * is ongoing.
- */
- I2C_STATE_LISTEN = 0x28U, /* Address Listen Mode is
- * ongoing.
- */
- I2C_STATE_BUSY_TX_LISTEN = 0x29U, /* Address Listen Mode
- * and Data Transmission
- * process is ongoing.
- */
- I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /* Address Listen Mode
- * and Data Reception
- * process is ongoing.
- */
- I2C_STATE_ABORT = 0x60U, /* Abort user request ongoing. */
- I2C_STATE_TIMEOUT = 0xA0U, /* Timeout state. */
- I2C_STATE_ERROR = 0xE0U /* Error. */
-
+ I2C_STATE_RESET = 0x00U, /* Not yet initialized */
+ I2C_STATE_READY = 0x20U, /* Ready for use */
+ I2C_STATE_BUSY = 0x24U, /* Internal process ongoing */
+ I2C_STATE_BUSY_TX = 0x21U, /* Data Transmission ongoing */
+ I2C_STATE_BUSY_RX = 0x22U, /* Data Reception ongoing */
};
enum i2c_mode_e {
- I2C_MODE_NONE = 0x00U, /* No I2C communication on going. */
- I2C_MODE_MASTER = 0x10U, /* I2C communication is in Master Mode. */
- I2C_MODE_SLAVE = 0x20U, /* I2C communication is in Slave Mode. */
- I2C_MODE_MEM = 0x40U /* I2C communication is in Memory Mode. */
+ I2C_MODE_NONE = 0x00U, /* No active communication */
+ I2C_MODE_MASTER = 0x10U, /* Communication in Master Mode */
+ I2C_MODE_SLAVE = 0x20U, /* Communication in Slave Mode */
+ I2C_MODE_MEM = 0x40U /* Communication in Memory Mode */
};
@@ -213,26 +232,12 @@ enum i2c_mode_e {
struct i2c_handle_s {
uint32_t i2c_base_addr; /* Registers base address */
-
- struct stm32_i2c_init_s i2c_init; /* Communication parameters */
-
- uint8_t *p_buff; /* Pointer to transfer buffer */
-
- uint16_t xfer_size; /* Transfer size */
-
- uint16_t xfer_count; /* Transfer counter */
-
- uint32_t prev_state; /* Communication previous
- * state
- */
-
- uint8_t lock; /* Locking object */
-
- enum i2c_state_e i2c_state; /* Communication state */
-
- enum i2c_mode_e i2c_mode; /* Communication mode */
-
- uint32_t i2c_err; /* Error code */
+ unsigned int dt_status; /* DT nsec/sec status */
+ unsigned int clock; /* Clock reference */
+ uint8_t lock; /* Locking object */
+ enum i2c_state_e i2c_state; /* Communication state */
+ enum i2c_mode_e i2c_mode; /* Communication mode */
+ uint32_t i2c_err; /* Error code */
};
#define I2C_ADDRESSINGMODE_7BIT 0x00000001U
@@ -250,15 +255,15 @@ struct i2c_handle_s {
#define I2C_MEMADD_SIZE_8BIT 0x00000001U
#define I2C_MEMADD_SIZE_16BIT 0x00000002U
-#define I2C_RELOAD_MODE I2C_CR2_RELOAD
-#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
-#define I2C_SOFTEND_MODE 0x00000000U
+#define I2C_RELOAD_MODE I2C_CR2_RELOAD
+#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
+#define I2C_SOFTEND_MODE 0x00000000U
-#define I2C_NO_STARTSTOP 0x00000000U
-#define I2C_GENERATE_STOP (BIT(31) | I2C_CR2_STOP)
-#define I2C_GENERATE_START_READ (BIT(31) | I2C_CR2_START | \
+#define I2C_NO_STARTSTOP 0x00000000U
+#define I2C_GENERATE_STOP (BIT(31) | I2C_CR2_STOP)
+#define I2C_GENERATE_START_READ (BIT(31) | I2C_CR2_START | \
I2C_CR2_RD_WRN)
-#define I2C_GENERATE_START_WRITE (BIT(31) | I2C_CR2_START)
+#define I2C_GENERATE_START_WRITE (BIT(31) | I2C_CR2_START)
#define I2C_FLAG_TXE I2C_ISR_TXE
#define I2C_FLAG_TXIS I2C_ISR_TXIS
@@ -281,21 +286,36 @@ struct i2c_handle_s {
I2C_CR2_NBYTES | I2C_CR2_RELOAD | \
I2C_CR2_RD_WRN)
-#define I2C_ANALOGFILTER_ENABLE ((uint32_t)0x00000000U)
-#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF
+#define I2C_TIMEOUT_BUSY_MS 25U
-int stm32_i2c_init(struct i2c_handle_s *hi2c);
+#define I2C_ANALOGFILTER_ENABLE 0x00000000U
+#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF
+/* STM32 specific defines */
+#define STM32_I2C_RISE_TIME_DEFAULT 25 /* ns */
+#define STM32_I2C_FALL_TIME_DEFAULT 10 /* ns */
+#define STM32_I2C_SPEED_DEFAULT I2C_SPEED_STANDARD
+#define STM32_I2C_ANALOG_FILTER_DELAY_MIN 50 /* ns */
+#define STM32_I2C_ANALOG_FILTER_DELAY_MAX 260 /* ns */
+#define STM32_I2C_DIGITAL_FILTER_MAX 16
+
+int stm32_i2c_get_setup_from_fdt(void *fdt, int node,
+ struct stm32_i2c_init_s *init);
+int stm32_i2c_init(struct i2c_handle_s *hi2c,
+ struct stm32_i2c_init_s *init_data);
int stm32_i2c_mem_write(struct i2c_handle_s *hi2c, uint16_t dev_addr,
uint16_t mem_addr, uint16_t mem_add_size,
- uint8_t *p_data, uint16_t size, uint32_t timeout);
+ uint8_t *p_data, uint16_t size, uint32_t timeout_ms);
int stm32_i2c_mem_read(struct i2c_handle_s *hi2c, uint16_t dev_addr,
uint16_t mem_addr, uint16_t mem_add_size,
- uint8_t *p_data, uint16_t size, uint32_t timeout);
-int stm32_i2c_is_device_ready(struct i2c_handle_s *hi2c, uint16_t dev_addr,
- uint32_t trials, uint32_t timeout);
-
-int stm32_i2c_config_analog_filter(struct i2c_handle_s *hi2c,
- uint32_t analog_filter);
+ uint8_t *p_data, uint16_t size, uint32_t timeout_ms);
+int stm32_i2c_master_transmit(struct i2c_handle_s *hi2c, uint16_t dev_addr,
+ uint8_t *p_data, uint16_t size,
+ uint32_t timeout_ms);
+int stm32_i2c_master_receive(struct i2c_handle_s *hi2c, uint16_t dev_addr,
+ uint8_t *p_data, uint16_t size,
+ uint32_t timeout_ms);
+bool stm32_i2c_is_device_ready(struct i2c_handle_s *hi2c, uint16_t dev_addr,
+ uint32_t trials, uint32_t timeout_ms);
#endif /* STM32_I2C_H */
diff --git a/include/drivers/st/stm32mp_pmic.h b/include/drivers/st/stm32mp_pmic.h
index 700039b26..984cd6014 100644
--- a/include/drivers/st/stm32mp_pmic.h
+++ b/include/drivers/st/stm32mp_pmic.h
@@ -11,10 +11,41 @@
#include <platform_def.h>
-bool dt_check_pmic(void);
-int dt_pmic_enable_boot_on_regulators(void);
-void initialize_pmic_i2c(void);
+/*
+ * dt_pmic_status - Check PMIC status from device tree
+ *
+ * Returns the status of the PMIC (secure, non-secure), or a negative value on
+ * error
+ */
+int dt_pmic_status(void);
+
+/*
+ * dt_pmic_configure_boot_on_regulators - Configure boot-on and always-on
+ * regulators from device tree configuration
+ *
+ * Returns 0 on success, and negative values on errors
+ */
+int dt_pmic_configure_boot_on_regulators(void);
+
+/*
+ * initialize_pmic_i2c - Initialize I2C for the PMIC control
+ *
+ * Returns true if PMIC is available, false if not found, panics on errors
+ */
+bool initialize_pmic_i2c(void);
+
+/*
+ * initialize_pmic - Main PMIC initialization function, called at platform init
+ *
+ * Panics on errors
+ */
void initialize_pmic(void);
+
+/*
+ * pmic_ddr_power_init - Initialize regulators required for DDR
+ *
+ * Returns 0 on success, and negative values on errors
+ */
int pmic_ddr_power_init(enum ddr_type ddr_type);
#endif /* STM32MP_PMIC_H */
generated by cgit v1.2.3 (git 2.25.1) at 2025-06-21 13:45:40 +0000