aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--docs/marvell/porting.txt52
-rw-r--r--drivers/marvell/comphy/comphy-cp110.h91
-rw-r--r--drivers/marvell/comphy/phy-comphy-common.h156
-rw-r--r--drivers/marvell/comphy/phy-comphy-cp110.c688
-rw-r--r--drivers/marvell/comphy/phy-comphy-cp110.h74
-rw-r--r--drivers/marvell/comphy/phy-default-porting-layer.h51
-rw-r--r--plat/marvell/a8k/a70x0/platform.mk3
-rw-r--r--plat/marvell/a8k/a70x0_amc/platform.mk3
-rw-r--r--plat/marvell/a8k/a80x0/board/phy-porting-layer.h167
-rw-r--r--plat/marvell/a8k/a80x0/platform.mk4
-rw-r--r--plat/marvell/a8k/a80x0_mcbin/platform.mk3
-rw-r--r--plat/marvell/a8k/common/a8k_common.mk4
-rw-r--r--plat/marvell/a8k/common/include/a8k_plat_def.h5
13 files changed, 1014 insertions, 287 deletions
diff --git a/docs/marvell/porting.txt b/docs/marvell/porting.txt
index 78000e912..f9a39a054 100644
--- a/docs/marvell/porting.txt
+++ b/docs/marvell/porting.txt
@@ -1,3 +1,5 @@
+.. _porting:
+
TF-A Porting Guide
=================
@@ -64,3 +66,53 @@ Armada-70x0/Armada-80x0 Porting
- Please refer to '<path_to_mv_ddr_sources>/doc/porting_guide.txt' for detailed porting description.
- The build target directory is "build/<platform>/release/ble".
+ - Comphy Porting (phy-porting-layer.h or phy-default-porting-layer.h)
+ - Background:
+ Some of the comphy's parameters value depend on the HW connection between the SoC and the PHY. Every
+ board type has specific HW characteristics like wire length. Due to those differences some comphy
+ parameters vary between board types. Therefore each board type can have its own list of values for
+ all relevant comphy parameters. The PHY porting layer specifies which parameters need to be suited and
+ the board designer should provide relevant values.
+
+ .. seealso::
+ For XFI/SFI comphy type there is procedure "rx_training" which eases process of suiting some of
+ the parameters. Please see :ref:`uboot_cmd` section: rx_training.
+
+ The PHY porting layer simplifies updating static values per board type, which are now grouped in one place.
+
+ .. note::
+ The parameters for the same type of comphy may vary even for the same board type, it is because
+ the lanes from comphy-x to some PHY may have different HW characteristic than lanes from
+ comphy-y to the same (multiplexed) or other PHY.
+
+ - Porting:
+ The porting layer for PHY was introduced in TF-A. There is one file
+ ``drivers/marvell/comphy/phy-default-porting-layer.h`` which contains the defaults. Those default
+ parameters are used only if there is no appropriate phy-porting-layer.h file under:
+ ``plat/marvell/<soc family>/<platform>/board/phy-porting-layer.h``. If the phy-porting-layer.h exists,
+ the phy-default-porting-layer.h is not going to be included.
+
+ .. warning::
+ Not all comphy types are already reworked to support the PHY porting layer, currently the porting
+ layer is supported for XFI/SFI and SATA comphy types.
+
+ The easiest way to prepare the PHY porting layer for custom board is to copy existing example to a new
+ platform:
+
+ - cp ``plat/marvell/a8k/a80x0/board/phy-porting-layer.h`` "plat/marvell/<soc family>/<platform>/board/phy-porting-layer.h"
+ - adjust relevant parameters or
+ - if different comphy index is used for specific feature, move it to proper table entry and then adjust.
+
+ .. note::
+ The final table size with comphy parameters can be different, depending on the CP module count for
+ given SoC type.
+
+ - Example:
+ Example porting layer for armada-8040-db is under: ``plat/marvell/a8k/a80x0/board/phy-porting-layer.h``
+
+ .. note::
+ If there is no PHY porting layer for new platform (missing phy-porting-layer.h), the default
+ values are used (drivers/marvell/comphy/phy-default-porting-layer.h) and the user is warned:
+
+ .. warning::
+ "Using default comphy parameters - it may be required to suit them for your board".
diff --git a/drivers/marvell/comphy/comphy-cp110.h b/drivers/marvell/comphy/comphy-cp110.h
index 6afa2c227..1d7aec88f 100644
--- a/drivers/marvell/comphy/comphy-cp110.h
+++ b/drivers/marvell/comphy/comphy-cp110.h
@@ -199,6 +199,11 @@
#define HPIPE_DFE_F3_F5_DFE_CTRL_MASK \
(0x1 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET)
+#define HPIPE_ADAPTED_DFE_COEFFICIENT_1_REG 0x30
+#define HPIPE_ADAPTED_DFE_RES_OFFSET 13
+#define HPIPE_ADAPTED_DFE_RES_MASK \
+ (0x3 << HPIPE_ADAPTED_DFE_RES_OFFSET)
+
#define HPIPE_G1_SET_0_REG 0x34
#define HPIPE_G1_SET_0_G1_TX_AMP_OFFSET 1
#define HPIPE_G1_SET_0_G1_TX_AMP_MASK \
@@ -326,6 +331,16 @@
#define HPIPE_PHY_TEST_DATA_MASK \
(0xffff << HPIPE_PHY_TEST_DATA_OFFSET)
+#define HPIPE_PHY_TEST_PRBS_ERROR_COUNTER_1_REG 0x80
+
+#define HPIPE_PHY_TEST_OOB_0_REGISTER 0x84
+#define HPIPE_PHY_PT_OOB_EN_OFFSET 14
+#define HPIPE_PHY_PT_OOB_EN_MASK \
+ (0x1 << HPIPE_PHY_PT_OOB_EN_OFFSET)
+#define HPIPE_PHY_TEST_PT_TESTMODE_OFFSET 12
+#define HPIPE_PHY_TEST_PT_TESTMODE_MASK \
+ (0x3 << HPIPE_PHY_TEST_PT_TESTMODE_OFFSET)
+
#define HPIPE_LOOPBACK_REG 0x8c
#define HPIPE_LOOPBACK_SEL_OFFSET 1
#define HPIPE_LOOPBACK_SEL_MASK \
@@ -357,10 +372,27 @@
(0x1 << HPIPE_G1_SET_2_G1_TX_EMPH0_EN_OFFSET)
#define HPIPE_G2_SET_2_REG 0xf8
+#define HPIPE_G2_SET_2_G2_TX_EMPH0_OFFSET 0
+#define HPIPE_G2_SET_2_G2_TX_EMPH0_MASK \
+ (0xf << HPIPE_G2_SET_2_G2_TX_EMPH0_OFFSET)
+#define HPIPE_G2_SET_2_G2_TX_EMPH0_EN_OFFSET 4
+#define HPIPE_G2_SET_2_G2_TX_EMPH0_EN_MASK \
+ (0x1 << HPIPE_G2_SET_2_G2_TX_EMPH0_EN_OFFSET)
#define HPIPE_G2_TX_SSC_AMP_OFFSET 9
#define HPIPE_G2_TX_SSC_AMP_MASK \
(0x7f << HPIPE_G2_TX_SSC_AMP_OFFSET)
+#define HPIPE_G3_SET_2_REG 0xfc
+#define HPIPE_G3_SET_2_G3_TX_EMPH0_OFFSET 0
+#define HPIPE_G3_SET_2_G3_TX_EMPH0_MASK \
+ (0xf << HPIPE_G3_SET_2_G3_TX_EMPH0_OFFSET)
+#define HPIPE_G3_SET_2_G3_TX_EMPH0_EN_OFFSET 4
+#define HPIPE_G3_SET_2_G3_TX_EMPH0_EN_MASK \
+ (0x1 << HPIPE_G3_SET_2_G3_TX_EMPH0_EN_OFFSET)
+#define HPIPE_G3_TX_SSC_AMP_OFFSET 9
+#define HPIPE_G3_TX_SSC_AMP_MASK \
+ (0x7f << HPIPE_G3_TX_SSC_AMP_OFFSET)
+
#define HPIPE_VDD_CAL_0_REG 0x108
#define HPIPE_CAL_VDD_CONT_MODE_OFFSET 15
#define HPIPE_CAL_VDD_CONT_MODE_MASK \
@@ -434,6 +466,15 @@
#define HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_MASK \
(0x1 << HPIPE_SPD_DIV_FORCE_TX_SPD_DIV_FORCE_OFFSET)
+/* HPIPE_RX_CLK_ALIGN90_AND_TX_IDLE_CALIBRATION_CTRL_REG */
+#define HPIPE_RX_CLK_ALIGN90_AND_TX_IDLE_CALIB_CTRL_REG 0x168
+#define HPIPE_CAL_RXCLKALIGN_90_EXT_EN_OFFSET 15
+#define HPIPE_CAL_RXCLKALIGN_90_EXT_EN_MASK \
+ (0x1 << HPIPE_CAL_RXCLKALIGN_90_EXT_EN_OFFSET)
+#define HPIPE_CAL_OS_PH_EXT_OFFSET 8
+#define HPIPE_CAL_OS_PH_EXT_MASK \
+ (0x7f << HPIPE_CAL_OS_PH_EXT_OFFSET)
+
#define HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG 0x16C
#define HPIPE_RX_SAMPLER_OS_GAIN_OFFSET 6
#define HPIPE_RX_SAMPLER_OS_GAIN_MASK \
@@ -484,6 +525,19 @@
#define HPIPE_OS_PH_VALID_MASK \
(0x1 << HPIPE_OS_PH_VALID_OFFSET)
+#define HPIPE_DATA_PHASE_OFF_CTRL_REG 0x1A0
+#define HPIPE_DATA_PHASE_ADAPTED_OS_PH_OFFSET 9
+#define HPIPE_DATA_PHASE_ADAPTED_OS_PH_MASK \
+ (0x7f << HPIPE_DATA_PHASE_ADAPTED_OS_PH_OFFSET)
+
+#define HPIPE_ADAPTED_FFE_CAPACITOR_COUNTER_CTRL_REG 0x1A4
+#define HPIPE_ADAPTED_FFE_ADAPTED_FFE_RES_OFFSET 12
+#define HPIPE_ADAPTED_FFE_ADAPTED_FFE_RES_MASK \
+ (0x3 << HPIPE_ADAPTED_FFE_ADAPTED_FFE_RES_OFFSET)
+#define HPIPE_ADAPTED_FFE_ADAPTED_FFE_CAP_OFFSET 8
+#define HPIPE_ADAPTED_FFE_ADAPTED_FFE_CAP_MASK \
+ (0xf << HPIPE_ADAPTED_FFE_ADAPTED_FFE_CAP_OFFSET)
+
#define HPIPE_SQ_GLITCH_FILTER_CTRL 0x1c8
#define HPIPE_SQ_DEGLITCH_WIDTH_P_OFFSET 0
#define HPIPE_SQ_DEGLITCH_WIDTH_P_MASK \
@@ -510,6 +564,26 @@
#define HPIPE_DME_ETHERNET_MODE_MASK \
(0x1 << HPIPE_DME_ETHERNET_MODE_OFFSET)
+#define HPIPE_TRX_TRAIN_CTRL_0_REG 0x22c
+#define HPIPE_TRX_TX_F0T_EO_BASED_OFFSET 14
+#define HPIPE_TRX_TX_F0T_EO_BASED_MASK \
+ (1 << HPIPE_TRX_TX_F0T_EO_BASED_OFFSET)
+#define HPIPE_TRX_UPDATE_THEN_HOLD_OFFSET 6
+#define HPIPE_TRX_UPDATE_THEN_HOLD_MASK \
+ (1 << HPIPE_TRX_UPDATE_THEN_HOLD_OFFSET)
+#define HPIPE_TRX_TX_CTRL_CLK_EN_OFFSET 5
+#define HPIPE_TRX_TX_CTRL_CLK_EN_MASK \
+ (1 << HPIPE_TRX_TX_CTRL_CLK_EN_OFFSET)
+#define HPIPE_TRX_RX_ANA_IF_CLK_ENE_OFFSET 4
+#define HPIPE_TRX_RX_ANA_IF_CLK_ENE_MASK \
+ (1 << HPIPE_TRX_RX_ANA_IF_CLK_ENE_OFFSET)
+#define HPIPE_TRX_TX_TRAIN_EN_OFFSET 1
+#define HPIPE_TRX_TX_TRAIN_EN_MASK \
+ (1 << HPIPE_TRX_TX_TRAIN_EN_OFFSET)
+#define HPIPE_TRX_RX_TRAIN_EN_OFFSET 0
+#define HPIPE_TRX_RX_TRAIN_EN_MASK \
+ (1 << HPIPE_TRX_RX_TRAIN_EN_OFFSET)
+
#define HPIPE_TX_TRAIN_CTRL_0_REG 0x268
#define HPIPE_TX_TRAIN_P2P_HOLD_OFFSET 15
#define HPIPE_TX_TRAIN_P2P_HOLD_MASK \
@@ -548,6 +622,23 @@
#define HPIPE_TX_TRAIN_WAIT_TIME_EN_MASK \
(0x1 << HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET)
+#define HPIPE_INTERRUPT_1_REGISTER 0x2AC
+#define HPIPE_TRX_TRAIN_FAILED_OFFSET 6
+#define HPIPE_TRX_TRAIN_FAILED_MASK \
+ (1 << HPIPE_TRX_TRAIN_FAILED_OFFSET)
+#define HPIPE_TRX_TRAIN_TIME_OUT_INT_OFFSET 5
+#define HPIPE_TRX_TRAIN_TIME_OUT_INT_MASK \
+ (1 << HPIPE_TRX_TRAIN_TIME_OUT_INT_OFFSET)
+#define HPIPE_INTERRUPT_TRX_TRAIN_DONE_OFFSET 4
+#define HPIPE_INTERRUPT_TRX_TRAIN_DONE_MASK \
+ (1 << HPIPE_INTERRUPT_TRX_TRAIN_DONE_OFFSET)
+#define HPIPE_INTERRUPT_DFE_DONE_INT_OFFSET 3
+#define HPIPE_INTERRUPT_DFE_DONE_INT_MASK \
+ (1 << HPIPE_INTERRUPT_DFE_DONE_INT_OFFSET)
+#define HPIPE_INTERRUPT_RX_TRAIN_COMPLETE_INT_OFFSET 1
+#define HPIPE_INTERRUPT_RX_TRAIN_COMPLETE_INT_MASK \
+ (1 << HPIPE_INTERRUPT_RX_TRAIN_COMPLETE_INT_OFFSET)
+
#define HPIPE_TX_TRAIN_REG 0x31C
#define HPIPE_TX_TRAIN_CHK_INIT_OFFSET 4
#define HPIPE_TX_TRAIN_CHK_INIT_MASK \
diff --git a/drivers/marvell/comphy/phy-comphy-common.h b/drivers/marvell/comphy/phy-comphy-common.h
new file mode 100644
index 000000000..ba1a83cef
--- /dev/null
+++ b/drivers/marvell/comphy/phy-comphy-common.h
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* Marvell CP110 ana A3700 common */
+
+#ifndef _PHY_COMPHY_COMMON_H
+#define _PHY_COMPHY_COMMON_H
+
+/* #define DEBUG_COMPHY */
+#ifdef DEBUG_COMPHY
+#define debug(format...) printf(format)
+#else
+#define debug(format, arg...)
+#endif
+
+/* A lane is described by 4 fields:
+ * - bit 1~0 represent comphy polarity invert
+ * - bit 7~2 represent comphy speed
+ * - bit 11~8 represent unit index
+ * - bit 16~12 represent mode
+ * - bit 17 represent comphy indication of clock source
+ * - bit 19-18 represents pcie width (in case of pcie comphy config.)
+ * - bit 31~20 reserved
+ */
+
+#define COMPHY_INVERT_OFFSET 0
+#define COMPHY_INVERT_LEN 2
+#define COMPHY_INVERT_MASK COMPHY_MASK(COMPHY_INVERT_OFFSET, \
+ COMPHY_INVERT_LEN)
+#define COMPHY_SPEED_OFFSET (COMPHY_INVERT_OFFSET + COMPHY_INVERT_LEN)
+#define COMPHY_SPEED_LEN 6
+#define COMPHY_SPEED_MASK COMPHY_MASK(COMPHY_SPEED_OFFSET, \
+ COMPHY_SPEED_LEN)
+#define COMPHY_UNIT_ID_OFFSET (COMPHY_SPEED_OFFSET + COMPHY_SPEED_LEN)
+#define COMPHY_UNIT_ID_LEN 4
+#define COMPHY_UNIT_ID_MASK COMPHY_MASK(COMPHY_UNIT_ID_OFFSET, \
+ COMPHY_UNIT_ID_LEN)
+#define COMPHY_MODE_OFFSET (COMPHY_UNIT_ID_OFFSET + COMPHY_UNIT_ID_LEN)
+#define COMPHY_MODE_LEN 5
+#define COMPHY_MODE_MASK COMPHY_MASK(COMPHY_MODE_OFFSET, COMPHY_MODE_LEN)
+#define COMPHY_CLK_SRC_OFFSET (COMPHY_MODE_OFFSET + COMPHY_MODE_LEN)
+#define COMPHY_CLK_SRC_LEN 1
+#define COMPHY_CLK_SRC_MASK COMPHY_MASK(COMPHY_CLK_SRC_OFFSET, \
+ COMPHY_CLK_SRC_LEN)
+#define COMPHY_PCI_WIDTH_OFFSET (COMPHY_CLK_SRC_OFFSET + COMPHY_CLK_SRC_LEN)
+#define COMPHY_PCI_WIDTH_LEN 3
+#define COMPHY_PCI_WIDTH_MASK COMPHY_MASK(COMPHY_PCI_WIDTH_OFFSET, \
+ COMPHY_PCI_WIDTH_LEN)
+
+#define COMPHY_MASK(offset, len) (((1 << (len)) - 1) << (offset))
+
+/* Macro which extracts mode from lane description */
+#define COMPHY_GET_MODE(x) (((x) & COMPHY_MODE_MASK) >> \
+ COMPHY_MODE_OFFSET)
+/* Macro which extracts unit index from lane description */
+#define COMPHY_GET_ID(x) (((x) & COMPHY_UNIT_ID_MASK) >> \
+ COMPHY_UNIT_ID_OFFSET)
+/* Macro which extracts speed from lane description */
+#define COMPHY_GET_SPEED(x) (((x) & COMPHY_SPEED_MASK) >> \
+ COMPHY_SPEED_OFFSET)
+/* Macro which extracts clock source indication from lane description */
+#define COMPHY_GET_CLK_SRC(x) (((x) & COMPHY_CLK_SRC_MASK) >> \
+ COMPHY_CLK_SRC_OFFSET)
+/* Macro which extracts pcie width indication from lane description */
+#define COMPHY_GET_PCIE_WIDTH(x) (((x) & COMPHY_PCI_WIDTH_MASK) >> \
+ COMPHY_PCI_WIDTH_OFFSET)
+
+/* Macro which extracts the polarity invert from lane description */
+#define COMPHY_GET_POLARITY_INVERT(x) (((x) & COMPHY_INVERT_MASK) >> \
+ COMPHY_INVERT_OFFSET)
+
+
+#define COMPHY_SATA_MODE 0x1
+#define COMPHY_SGMII_MODE 0x2 /* SGMII 1G */
+#define COMPHY_HS_SGMII_MODE 0x3 /* SGMII 2.5G */
+#define COMPHY_USB3H_MODE 0x4
+#define COMPHY_USB3D_MODE 0x5
+#define COMPHY_PCIE_MODE 0x6
+#define COMPHY_RXAUI_MODE 0x7
+#define COMPHY_XFI_MODE 0x8
+#define COMPHY_SFI_MODE 0x9
+#define COMPHY_USB3_MODE 0xa
+#define COMPHY_AP_MODE 0xb
+
+#define COMPHY_UNUSED 0xFFFFFFFF
+
+/* Polarity invert macro */
+#define COMPHY_POLARITY_NO_INVERT 0
+#define COMPHY_POLARITY_TXD_INVERT 1
+#define COMPHY_POLARITY_RXD_INVERT 2
+#define COMPHY_POLARITY_ALL_INVERT (COMPHY_POLARITY_TXD_INVERT | \
+ COMPHY_POLARITY_RXD_INVERT)
+
+enum reg_width_type {
+ REG_16BIT = 0,
+ REG_32BIT,
+};
+
+enum {
+ COMPHY_LANE0 = 0,
+ COMPHY_LANE1,
+ COMPHY_LANE2,
+ COMPHY_LANE3,
+ COMPHY_LANE4,
+ COMPHY_LANE5,
+ COMPHY_LANE_MAX,
+};
+
+static inline uint32_t polling_with_timeout(uintptr_t addr, uint32_t val,
+ uint32_t mask,
+ uint32_t usec_timeout,
+ enum reg_width_type type)
+{
+ uint32_t data;
+
+ do {
+ udelay(1);
+ if (type == REG_16BIT)
+ data = mmio_read_16(addr) & mask;
+ else
+ data = mmio_read_32(addr) & mask;
+ } while (data != val && --usec_timeout > 0);
+
+ if (usec_timeout == 0)
+ return data;
+
+ return 0;
+}
+
+static inline void reg_set(uintptr_t addr, uint32_t data, uint32_t mask)
+{
+ debug("<atf>: WR to addr = 0x%lx, data = 0x%x (mask = 0x%x) - ",
+ addr, data, mask);
+ debug("old value = 0x%x ==> ", mmio_read_32(addr));
+ mmio_clrsetbits_32(addr, mask, data);
+
+ debug("new val 0x%x\n", mmio_read_32(addr));
+}
+
+static inline void __unused reg_set16(uintptr_t addr, uint16_t data,
+ uint16_t mask)
+{
+
+ debug("<atf>: WR to addr = 0x%lx, data = 0x%x (mask = 0x%x) - ",
+ addr, data, mask);
+ debug("old value = 0x%x ==> ", mmio_read_16(addr));
+ mmio_clrsetbits_16(addr, mask, data);
+
+ debug("new val 0x%x\n", mmio_read_16(addr));
+}
+
+#endif /* _PHY_COMPHY_COMMON_H */
diff --git a/drivers/marvell/comphy/phy-comphy-cp110.c b/drivers/marvell/comphy/phy-comphy-cp110.c
index 19bd182fa..25893a98f 100644
--- a/drivers/marvell/comphy/phy-comphy-cp110.c
+++ b/drivers/marvell/comphy/phy-comphy-cp110.c
@@ -15,78 +15,15 @@
#include <spinlock.h>
#include "mvebu.h"
#include "comphy-cp110.h"
+#include "phy-comphy-cp110.h"
+#include "phy-comphy-common.h"
-/* #define DEBUG_COMPHY */
-#ifdef DEBUG_COMPHY
-#define debug(format...) printf(format)
+#if __has_include("phy-porting-layer.h")
+#include "phy-porting-layer.h"
#else
-#define debug(format, arg...)
+#include "phy-default-porting-layer.h"
#endif
-/* A lane is described by 4 fields:
- * - bit 1~0 represent comphy polarity invert
- * - bit 7~2 represent comphy speed
- * - bit 11~8 represent unit index
- * - bit 16~12 represent mode
- * - bit 17 represent comphy indication of clock source
- * - bit 19-18 represents pcie width (in case of pcie comphy config.)
- * - bit 31~20 reserved
- */
-
-#define COMPHY_INVERT_OFFSET 0
-#define COMPHY_INVERT_LEN 2
-#define COMPHY_INVERT_MASK COMPHY_MASK(COMPHY_INVERT_OFFSET, \
- COMPHY_INVERT_LEN)
-#define COMPHY_SPEED_OFFSET (COMPHY_INVERT_OFFSET + COMPHY_INVERT_LEN)
-#define COMPHY_SPEED_LEN 6
-#define COMPHY_SPEED_MASK COMPHY_MASK(COMPHY_SPEED_OFFSET, \
- COMPHY_SPEED_LEN)
-#define COMPHY_UNIT_ID_OFFSET (COMPHY_SPEED_OFFSET + COMPHY_SPEED_LEN)
-#define COMPHY_UNIT_ID_LEN 4
-#define COMPHY_UNIT_ID_MASK COMPHY_MASK(COMPHY_UNIT_ID_OFFSET, \
- COMPHY_UNIT_ID_LEN)
-#define COMPHY_MODE_OFFSET (COMPHY_UNIT_ID_OFFSET + COMPHY_UNIT_ID_LEN)
-#define COMPHY_MODE_LEN 5
-#define COMPHY_MODE_MASK COMPHY_MASK(COMPHY_MODE_OFFSET, COMPHY_MODE_LEN)
-#define COMPHY_CLK_SRC_OFFSET (COMPHY_MODE_OFFSET + COMPHY_MODE_LEN)
-#define COMPHY_CLK_SRC_LEN 1
-#define COMPHY_CLK_SRC_MASK COMPHY_MASK(COMPHY_CLK_SRC_OFFSET, \
- COMPHY_CLK_SRC_LEN)
-#define COMPHY_PCI_WIDTH_OFFSET (COMPHY_CLK_SRC_OFFSET + COMPHY_CLK_SRC_LEN)
-#define COMPHY_PCI_WIDTH_LEN 3
-#define COMPHY_PCI_WIDTH_MASK COMPHY_MASK(COMPHY_PCI_WIDTH_OFFSET, \
- COMPHY_PCI_WIDTH_LEN)
-
-#define COMPHY_MASK(offset, len) (((1 << (len)) - 1) << (offset))
-
-/* Macro which extracts mode from lane description */
-#define COMPHY_GET_MODE(x) (((x) & COMPHY_MODE_MASK) >> \
- COMPHY_MODE_OFFSET)
-/* Macro which extracts unit index from lane description */
-#define COMPHY_GET_ID(x) (((x) & COMPHY_UNIT_ID_MASK) >> \
- COMPHY_UNIT_ID_OFFSET)
-/* Macro which extracts speed from lane description */
-#define COMPHY_GET_SPEED(x) (((x) & COMPHY_SPEED_MASK) >> \
- COMPHY_SPEED_OFFSET)
-/* Macro which extracts clock source indication from lane description */
-#define COMPHY_GET_CLK_SRC(x) (((x) & COMPHY_CLK_SRC_MASK) >> \
- COMPHY_CLK_SRC_OFFSET)
-/* Macro which extracts pcie width indication from lane description */
-#define COMPHY_GET_PCIE_WIDTH(x) (((x) & COMPHY_PCI_WIDTH_MASK) >> \
- COMPHY_PCI_WIDTH_OFFSET)
-
-#define COMPHY_SATA_MODE 0x1
-#define COMPHY_SGMII_MODE 0x2 /* SGMII 1G */
-#define COMPHY_HS_SGMII_MODE 0x3 /* SGMII 2.5G */
-#define COMPHY_USB3H_MODE 0x4
-#define COMPHY_USB3D_MODE 0x5
-#define COMPHY_PCIE_MODE 0x6
-#define COMPHY_RXAUI_MODE 0x7
-#define COMPHY_XFI_MODE 0x8
-#define COMPHY_SFI_MODE 0x9
-#define COMPHY_USB3_MODE 0xa
-#define COMPHY_AP_MODE 0xb
-
/* COMPHY speed macro */
#define COMPHY_SPEED_1_25G 0 /* SGMII 1G */
#define COMPHY_SPEED_2_5G 1
@@ -129,21 +66,6 @@
*/
spinlock_t cp110_mac_reset_lock;
-enum reg_width_type {
- REG_16BIT = 0,
- REG_32BIT,
-};
-
-enum {
- COMPHY_LANE0 = 0,
- COMPHY_LANE1,
- COMPHY_LANE2,
- COMPHY_LANE3,
- COMPHY_LANE4,
- COMPHY_LANE5,
- COMPHY_LANE_MAX,
-};
-
/* These values come from the PCI Express Spec */
enum pcie_link_width {
PCIE_LNK_WIDTH_RESRV = 0x00,
@@ -157,36 +79,24 @@ enum pcie_link_width {
PCIE_LNK_WIDTH_UNKNOWN = 0xFF,
};
-static inline uint32_t polling_with_timeout(uintptr_t addr,
- uint32_t val,
- uint32_t mask,
- uint32_t usec_timeout,
- enum reg_width_type type)
-{
- uint32_t data;
-
- do {
- udelay(1);
- if (type == REG_16BIT)
- data = mmio_read_16(addr) & mask;
- else
- data = mmio_read_32(addr) & mask;
- } while (data != val && --usec_timeout > 0);
-
- if (usec_timeout == 0)
- return data;
+_Bool rx_trainng_done[AP_NUM][CP_NUM][MAX_LANE_NR] = {0};
- return 0;
-}
-
-static inline void reg_set(uintptr_t addr, uint32_t data, uint32_t mask)
+static void mvebu_cp110_get_ap_and_cp_nr(uint8_t *ap_nr, uint8_t *cp_nr,
+ uint64_t comphy_base)
{
- debug("<atf>: WR to addr = %#010lx, data = %#010x (mask = %#010x) - ",
- addr, data, mask);
- debug("old value = %#010x ==> ", mmio_read_32(addr));
- mmio_clrsetbits_32(addr, mask, data);
+#if (AP_NUM == 1)
+ *ap_nr = 0;
+#else
+ *ap_nr = (((comphy_base & ~0xffffff) - MVEBU_AP_IO_BASE(0)) /
+ AP_IO_OFFSET);
+#endif
+
+ *cp_nr = (((comphy_base & ~0xffffff) - MVEBU_AP_IO_BASE(*ap_nr)) /
+ MVEBU_CP_OFFSET);
- debug("new val %#010x\n", mmio_read_32(addr));
+ debug("cp_base 0x%llx, ap_io_base 0x%lx, cp_offset 0x%lx\n",
+ comphy_base, (unsigned long)MVEBU_AP_IO_BASE(*ap_nr),
+ (unsigned long)MVEBU_CP_OFFSET);
}
/* Clear PIPE selector - avoid collision with previous configuration */
@@ -413,10 +323,17 @@ static int mvebu_cp110_comphy_sata_power_on(uint64_t comphy_base,
{
uintptr_t hpipe_addr, sd_ip_addr, comphy_addr;
uint32_t mask, data;
+ uint8_t ap_nr, cp_nr;
int ret = 0;
debug_enter();
+ mvebu_cp110_get_ap_and_cp_nr(&ap_nr, &cp_nr, comphy_base);
+
+ const struct sata_params *sata_static_values =
+ &sata_static_values_tab[ap_nr][cp_nr][comphy_index];
+
+
/* configure phy selector for SATA */
mvebu_cp110_comphy_set_phy_selector(comphy_base,
comphy_index, comphy_mode);
@@ -480,13 +397,17 @@ static int mvebu_cp110_comphy_sata_power_on(uint64_t comphy_base,
debug("stage: Analog parameters from ETP(HW)\n");
/* G1 settings */
mask = HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
- data = 0x0 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
+ data = sata_static_values->g1_rx_selmupi <<
+ HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
mask |= HPIPE_G1_SET_1_G1_RX_SELMUPF_MASK;
- data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPF_OFFSET;
+ data |= sata_static_values->g1_rx_selmupf <<
+ HPIPE_G1_SET_1_G1_RX_SELMUPF_OFFSET;
mask |= HPIPE_G1_SET_1_G1_RX_SELMUFI_MASK;
- data |= 0x0 << HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET;
+ data |= sata_static_values->g1_rx_selmufi <<
+ HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET;
mask |= HPIPE_G1_SET_1_G1_RX_SELMUFF_MASK;
- data |= 0x3 << HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET;
+ data |= sata_static_values->g1_rx_selmuff <<
+ HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET;
mask |= HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_MASK;
data |= 0x1 << HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET;
reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask);
@@ -505,26 +426,34 @@ static int mvebu_cp110_comphy_sata_power_on(uint64_t comphy_base,
/* G2 settings */
mask = HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK;
- data = 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET;
+ data = sata_static_values->g2_rx_selmupi <<
+ HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET;
mask |= HPIPE_G2_SET_1_G2_RX_SELMUPF_MASK;
- data |= 0x1 << HPIPE_G2_SET_1_G2_RX_SELMUPF_OFFSET;
+ data |= sata_static_values->g2_rx_selmupf <<
+ HPIPE_G2_SET_1_G2_RX_SELMUPF_OFFSET;
mask |= HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK;
- data |= 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET;
+ data |= sata_static_values->g2_rx_selmufi <<
+ HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET;
mask |= HPIPE_G2_SET_1_G2_RX_SELMUFF_MASK;
- data |= 0x3 << HPIPE_G2_SET_1_G2_RX_SELMUFF_OFFSET;
+ data |= sata_static_values->g2_rx_selmuff <<
+ HPIPE_G2_SET_1_G2_RX_SELMUFF_OFFSET;
mask |= HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_MASK;
data |= 0x1 << HPIPE_G2_SET_1_G2_RX_DIGCK_DIV_OFFSET;
reg_set(hpipe_addr + HPIPE_G2_SET_1_REG, data, mask);
/* G3 settings */
mask = HPIPE_G3_SET_1_G3_RX_SELMUPI_MASK;
- data = 0x2 << HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET;
+ data = sata_static_values->g3_rx_selmupi <<
+ HPIPE_G3_SET_1_G3_RX_SELMUPI_OFFSET;
mask |= HPIPE_G3_SET_1_G3_RX_SELMUPF_MASK;
- data |= 0x2 << HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET;
+ data |= sata_static_values->g3_rx_selmupf <<
+ HPIPE_G3_SET_1_G3_RX_SELMUPF_OFFSET;
mask |= HPIPE_G3_SET_1_G3_RX_SELMUFI_MASK;
- data |= 0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFI_OFFSET;
+ data |= sata_static_values->g3_rx_selmufi <<
+ HPIPE_G3_SET_1_G3_RX_SELMUFI_OFFSET;
mask |= HPIPE_G3_SET_1_G3_RX_SELMUFF_MASK;
- data |= 0x3 << HPIPE_G3_SET_1_G3_RX_SELMUFF_OFFSET;
+ data |= sata_static_values->g3_rx_selmuff <<
+ HPIPE_G3_SET_1_G3_RX_SELMUFF_OFFSET;
mask |= HPIPE_G3_SET_1_G3_RX_DFE_EN_MASK;
data |= 0x1 << HPIPE_G3_SET_1_G3_RX_DFE_EN_OFFSET;
mask |= HPIPE_G3_SET_1_G3_RX_DIGCK_DIV_MASK;
@@ -577,9 +506,11 @@ static int mvebu_cp110_comphy_sata_power_on(uint64_t comphy_base,
/* G3 Setting 3 */
mask = HPIPE_G3_FFE_CAP_SEL_MASK;
- data = 0xf << HPIPE_G3_FFE_CAP_SEL_OFFSET;
+ data = sata_static_values->g3_ffe_cap_sel <<
+ HPIPE_G3_FFE_CAP_SEL_OFFSET;
mask |= HPIPE_G3_FFE_RES_SEL_MASK;
- data |= 0x4 << HPIPE_G3_FFE_RES_SEL_OFFSET;
+ data |= sata_static_values->g3_ffe_res_sel <<
+ HPIPE_G3_FFE_RES_SEL_OFFSET;
mask |= HPIPE_G3_FFE_SETTING_FORCE_MASK;
data |= 0x1 << HPIPE_G3_FFE_SETTING_FORCE_OFFSET;
mask |= HPIPE_G3_FFE_DEG_RES_LEVEL_MASK;
@@ -590,12 +521,12 @@ static int mvebu_cp110_comphy_sata_power_on(uint64_t comphy_base,
/* G3 Setting 4 */
mask = HPIPE_G3_DFE_RES_MASK;
- data = 0x1 << HPIPE_G3_DFE_RES_OFFSET;
+ data = sata_static_values->g3_dfe_res << HPIPE_G3_DFE_RES_OFFSET;
reg_set(hpipe_addr + HPIPE_G3_SETTING_4_REG, data, mask);
/* Offset Phase Control */
mask = HPIPE_OS_PH_OFFSET_MASK;
- data = 0x61 << HPIPE_OS_PH_OFFSET_OFFSET;
+ data = sata_static_values->align90 << HPIPE_OS_PH_OFFSET_OFFSET;
mask |= HPIPE_OS_PH_OFFSET_FORCE_MASK;
data |= 0x1 << HPIPE_OS_PH_OFFSET_FORCE_OFFSET;
mask |= HPIPE_OS_PH_VALID_MASK;
@@ -610,41 +541,77 @@ static int mvebu_cp110_comphy_sata_power_on(uint64_t comphy_base,
/* Set G1 TX amplitude and TX post emphasis value */
mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK;
- data = 0x8 << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET;
+ data = sata_static_values->g1_amp << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET;
mask |= HPIPE_G1_SET_0_G1_TX_AMP_ADJ_MASK;
- data |= 0x1 << HPIPE_G1_SET_0_G1_TX_AMP_ADJ_OFFSET;
+ data |= sata_static_values->g1_tx_amp_adj <<
+ HPIPE_G1_SET_0_G1_TX_AMP_ADJ_OFFSET;
mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK;
- data |= 0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
+ data |= sata_static_values->g1_emph <<
+ HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_EN_MASK;
- data |= 0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_EN_OFFSET;
+ data |= sata_static_values->g1_emph_en <<
+ HPIPE_G1_SET_0_G1_TX_EMPH1_EN_OFFSET;
reg_set(hpipe_addr + HPIPE_G1_SET_0_REG, data, mask);
+ /* Set G1 emph */
+ mask = HPIPE_G1_SET_2_G1_TX_EMPH0_EN_MASK;
+ data = sata_static_values->g1_tx_emph_en <<
+ HPIPE_G1_SET_2_G1_TX_EMPH0_EN_OFFSET;
+ mask |= HPIPE_G1_SET_2_G1_TX_EMPH0_MASK;
+ data |= sata_static_values->g1_tx_emph <<
+ HPIPE_G1_SET_2_G1_TX_EMPH0_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G1_SET_2_REG, data, mask);
+
/* Set G2 TX amplitude and TX post emphasis value */
mask = HPIPE_G2_SET_0_G2_TX_AMP_MASK;
- data = 0xa << HPIPE_G2_SET_0_G2_TX_AMP_OFFSET;
+ data = sata_static_values->g2_amp << HPIPE_G2_SET_0_G2_TX_AMP_OFFSET;
mask |= HPIPE_G2_SET_0_G2_TX_AMP_ADJ_MASK;
- data |= 0x1 << HPIPE_G2_SET_0_G2_TX_AMP_ADJ_OFFSET;
+ data |= sata_static_values->g2_tx_amp_adj <<
+ HPIPE_G2_SET_0_G2_TX_AMP_ADJ_OFFSET;
mask |= HPIPE_G2_SET_0_G2_TX_EMPH1_MASK;
- data |= 0x2 << HPIPE_G2_SET_0_G2_TX_EMPH1_OFFSET;
+ data |= sata_static_values->g2_emph <<
+ HPIPE_G2_SET_0_G2_TX_EMPH1_OFFSET;
mask |= HPIPE_G2_SET_0_G2_TX_EMPH1_EN_MASK;
- data |= 0x1 << HPIPE_G2_SET_0_G2_TX_EMPH1_EN_OFFSET;
+ data |= sata_static_values->g2_emph_en <<
+ HPIPE_G2_SET_0_G2_TX_EMPH1_EN_OFFSET;
reg_set(hpipe_addr + HPIPE_G2_SET_0_REG, data, mask);
+ /* Set G2 emph */
+ mask = HPIPE_G2_SET_2_G2_TX_EMPH0_EN_MASK;
+ data = sata_static_values->g2_tx_emph_en <<
+ HPIPE_G2_SET_2_G2_TX_EMPH0_EN_OFFSET;
+ mask |= HPIPE_G2_SET_2_G2_TX_EMPH0_MASK;
+ data |= sata_static_values->g2_tx_emph <<
+ HPIPE_G2_SET_2_G2_TX_EMPH0_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G2_SET_2_REG, data, mask);
+
/* Set G3 TX amplitude and TX post emphasis value */
mask = HPIPE_G3_SET_0_G3_TX_AMP_MASK;
- data = 0x1e << HPIPE_G3_SET_0_G3_TX_AMP_OFFSET;
+ data = sata_static_values->g3_amp << HPIPE_G3_SET_0_G3_TX_AMP_OFFSET;
mask |= HPIPE_G3_SET_0_G3_TX_AMP_ADJ_MASK;
- data |= 0x1 << HPIPE_G3_SET_0_G3_TX_AMP_ADJ_OFFSET;
+ data |= sata_static_values->g3_tx_amp_adj <<
+ HPIPE_G3_SET_0_G3_TX_AMP_ADJ_OFFSET;
mask |= HPIPE_G3_SET_0_G3_TX_EMPH1_MASK;
- data |= 0xe << HPIPE_G3_SET_0_G3_TX_EMPH1_OFFSET;
+ data |= sata_static_values->g3_emph <<
+ HPIPE_G3_SET_0_G3_TX_EMPH1_OFFSET;
mask |= HPIPE_G3_SET_0_G3_TX_EMPH1_EN_MASK;
- data |= 0x1 << HPIPE_G3_SET_0_G3_TX_EMPH1_EN_OFFSET;
+ data |= sata_static_values->g3_emph_en <<
+ HPIPE_G3_SET_0_G3_TX_EMPH1_EN_OFFSET;
mask |= HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_MASK;
data |= 0x4 << HPIPE_G3_SET_0_G3_TX_SLEW_RATE_SEL_OFFSET;
mask |= HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_MASK;
data |= 0x0 << HPIPE_G3_SET_0_G3_TX_SLEW_CTRL_EN_OFFSET;
reg_set(hpipe_addr + HPIPE_G3_SET_0_REG, data, mask);
+ /* Set G3 emph */
+ mask = HPIPE_G3_SET_2_G3_TX_EMPH0_EN_MASK;
+ data = sata_static_values->g3_tx_emph_en <<
+ HPIPE_G3_SET_2_G3_TX_EMPH0_EN_OFFSET;
+ mask |= HPIPE_G3_SET_2_G3_TX_EMPH0_MASK;
+ data |= sata_static_values->g3_tx_emph <<
+ HPIPE_G3_SET_2_G3_TX_EMPH0_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G3_SET_2_REG, data, mask);
+
/* SERDES External Configuration 2 register */
mask = SD_EXTERNAL_CONFIG2_SSC_ENABLE_MASK;
data = 0x1 << SD_EXTERNAL_CONFIG2_SSC_ENABLE_OFFSET;
@@ -779,7 +746,7 @@ static int mvebu_cp110_comphy_sgmii_power_on(uint64_t comphy_base,
data = 0x0 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET;
reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask);
- /* Set analog parameters from ETP(HW) - for now use the default datas */
+ /* Set analog parameters from ETP(HW) - for now use the default data */
debug("stage: Analog parameters from ETP(HW)\n");
reg_set(hpipe_addr + HPIPE_G1_SET_0_REG,
@@ -835,9 +802,37 @@ static int mvebu_cp110_comphy_xfi_power_on(uint64_t comphy_base,
uintptr_t hpipe_addr, sd_ip_addr, comphy_addr, addr;
uint32_t mask, data, speed = COMPHY_GET_SPEED(comphy_mode);
int ret = 0;
+ uint8_t ap_nr, cp_nr;
debug_enter();
+ mvebu_cp110_get_ap_and_cp_nr(&ap_nr, &cp_nr, comphy_base);
+
+ if (rx_trainng_done[ap_nr][cp_nr][comphy_index]) {
+ debug("Skip %s for comphy[%d][%d][%d], due to rx training\n",
+ __func__, ap_nr, cp_nr, comphy_index);
+ return 0;
+ }
+
+ const struct xfi_params *xfi_static_values =
+ &xfi_static_values_tab[ap_nr][cp_nr][comphy_index];
+
+ debug("%s: the ap_nr = %d, cp_nr = %d, comphy_index %d\n",
+ __func__, ap_nr, cp_nr, comphy_index);
+
+ debug("g1_ffe_cap_sel= 0x%x, g1_ffe_res_sel= 0x%x, g1_dfe_res= 0x%x\n",
+ xfi_static_values->g1_ffe_cap_sel,
+ xfi_static_values->g1_ffe_res_sel,
+ xfi_static_values->g1_dfe_res);
+
+ if (!xfi_static_values->valid) {
+ ERROR("[ap%d][cp[%d][comphy:%d]: Has no valid static params\n",
+ ap_nr, cp_nr, comphy_index);
+ ERROR("[ap%d][cp[%d][comphy:%d]: porting layer needs update\n",
+ ap_nr, cp_nr, comphy_index);
+ return -EINVAL;
+ }
+
if ((speed != COMPHY_SPEED_5_15625G) &&
(speed != COMPHY_SPEED_10_3125G) &&
(speed != COMPHY_SPEED_DEFAULT)) {
@@ -966,16 +961,27 @@ static int mvebu_cp110_comphy_xfi_power_on(uint64_t comphy_base,
data = 0x6 << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
} else {
mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK;
- data = 0x1c << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET;
+ data = xfi_static_values->g1_amp <<
+ HPIPE_G1_SET_0_G1_TX_AMP_OFFSET;
mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK;
- data |= 0xe << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
+ data |= xfi_static_values->g1_emph <<
+ HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET;
+
+ mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_EN_MASK;
+ data |= xfi_static_values->g1_emph_en <<
+ HPIPE_G1_SET_0_G1_TX_EMPH1_EN_OFFSET;
+ mask |= HPIPE_G1_SET_0_G1_TX_AMP_ADJ_MASK;
+ data |= xfi_static_values->g1_tx_amp_adj <<
+ HPIPE_G1_SET_0_G1_TX_AMP_ADJ_OFFSET;
}
reg_set(hpipe_addr + HPIPE_G1_SET_0_REG, data, mask);
/* Genration 1 setting 2 (G1_Setting_2) */
mask = HPIPE_G1_SET_2_G1_TX_EMPH0_MASK;
- data = 0x0 << HPIPE_G1_SET_2_G1_TX_EMPH0_OFFSET;
+ data = xfi_static_values->g1_tx_emph <<
+ HPIPE_G1_SET_2_G1_TX_EMPH0_OFFSET;
mask |= HPIPE_G1_SET_2_G1_TX_EMPH0_EN_MASK;
- data |= 0x1 << HPIPE_G1_SET_2_G1_TX_EMPH0_EN_OFFSET;
+ data |= xfi_static_values->g1_tx_emph_en <<
+ HPIPE_G1_SET_2_G1_TX_EMPH0_EN_OFFSET;
reg_set(hpipe_addr + HPIPE_G1_SET_2_REG, data, mask);
/* Transmitter Slew Rate Control register (tx_reg1) */
mask = HPIPE_TX_REG1_TX_EMPH_RES_MASK;
@@ -1004,13 +1010,17 @@ static int mvebu_cp110_comphy_xfi_power_on(uint64_t comphy_base,
data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPF_OFFSET;
} else {
mask |= HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK;
- data |= 0x2 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
+ data |= xfi_static_values->g1_rx_selmupi <<
+ HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET;
mask |= HPIPE_G1_SET_1_G1_RX_SELMUPF_MASK;
- data |= 0x2 << HPIPE_G1_SET_1_G1_RX_SELMUPF_OFFSET;
+ data |= xfi_static_values->g1_rx_selmupf <<
+ HPIPE_G1_SET_1_G1_RX_SELMUPF_OFFSET;
mask |= HPIPE_G1_SET_1_G1_RX_SELMUFI_MASK;
- data |= 0x0 << HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET;
+ data |= xfi_static_values->g1_rx_selmufi <<
+ HPIPE_G1_SET_1_G1_RX_SELMUFI_OFFSET;
mask |= HPIPE_G1_SET_1_G1_RX_SELMUFF_MASK;
- data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET;
+ data |= xfi_static_values->g1_rx_selmuff <<
+ HPIPE_G1_SET_1_G1_RX_SELMUFF_OFFSET;
mask |= HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_MASK;
data |= 0x3 << HPIPE_G1_SET_1_G1_RX_DIGCK_DIV_OFFSET;
}
@@ -1038,8 +1048,43 @@ static int mvebu_cp110_comphy_xfi_power_on(uint64_t comphy_base,
data |= 0x4 << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET;
mask |= HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK;
data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+ } else {
+ mask |= HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK;
+ data |= xfi_static_values->g1_ffe_cap_sel <<
+ HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET;
+ mask |= HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK;
+ data |= xfi_static_values->g1_ffe_res_sel <<
+ HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET;
+ mask |= HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK;
+ data |= 0x1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+
+ /* Use the value from CAL_OS_PH_EXT */
+ mask = HPIPE_CAL_RXCLKALIGN_90_EXT_EN_MASK;
+ data = 1 << HPIPE_CAL_RXCLKALIGN_90_EXT_EN_OFFSET;
+ reg_set(hpipe_addr +
+ HPIPE_RX_CLK_ALIGN90_AND_TX_IDLE_CALIB_CTRL_REG,
+ data, mask);
+
+ /* Update align90 */
+ mask = HPIPE_CAL_OS_PH_EXT_MASK;
+ data = xfi_static_values->align90 << HPIPE_CAL_OS_PH_EXT_OFFSET;
+ reg_set(hpipe_addr +
+ HPIPE_RX_CLK_ALIGN90_AND_TX_IDLE_CALIB_CTRL_REG,
+ data, mask);
+
+ /* Force DFE resolution (use gen table value) */
+ mask = HPIPE_DFE_RES_FORCE_MASK;
+ data = 0x0 << HPIPE_DFE_RES_FORCE_OFFSET;
+ reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
+
+ /* 0x111-G1 DFE_Setting_4 */
+ mask = HPIPE_G1_SETTINGS_4_G1_DFE_RES_MASK;
+ data = xfi_static_values->g1_dfe_res <<
+ HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G1_SETTINGS_4_REG, data, mask);
}
- reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
/* Connfigure RX training timer */
mask = HPIPE_RX_TRAIN_TIMER_MASK;
@@ -1949,192 +1994,255 @@ static int mvebu_cp110_comphy_usb3_power_on(uint64_t comphy_base,
return ret;
}
-/* This function performs RX training for one Feed Forward Equalization (FFE)
- * value.
- * The RX traiing result is stored in 'Saved DFE values Register' (SAV_F0D).
- *
- * Return '0' on success, error code in a case of failure.
- */
-static int mvebu_cp110_comphy_test_single_ffe(uint64_t comphy_base,
- uint8_t comphy_index,
- uint32_t ffe, uint32_t *result)
+int mvebu_cp110_comphy_xfi_rx_training(uint64_t comphy_base,
+ uint8_t comphy_index)
{
uint32_t mask, data, timeout;
+ uint32_t g1_ffe_cap_sel, g1_ffe_res_sel, align90, g1_dfe_res;
uintptr_t hpipe_addr, sd_ip_addr;
+ uint8_t ap_nr, cp_nr;
+
+ mvebu_cp110_get_ap_and_cp_nr(&ap_nr, &cp_nr, comphy_base);
+
hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
comphy_index);
-
sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
comphy_index);
+ debug_enter();
+
+ debug("stage: RF Reset\n");
+
+ /* Release from hard reset */
+ mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+ data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+ mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+ data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+ mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
+ data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
+ reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+ mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
+ data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
+ mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
+ data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
+ reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
+
+ /* Wait 50ms - until band gap and ref clock ready */
+ mdelay(50);
+
+ debug("Preparation for rx_training\n\n");
+
+ /* Use the FFE table */
+ mask = HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK;
+ data = 0 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+
+ /* Use auto-calibration value */
+ mask = HPIPE_CAL_RXCLKALIGN_90_EXT_EN_MASK;
+ data = 0 << HPIPE_CAL_RXCLKALIGN_90_EXT_EN_OFFSET;
+ reg_set(hpipe_addr + HPIPE_RX_CLK_ALIGN90_AND_TX_IDLE_CALIB_CTRL_REG,
+ data, mask);
+
+ /* Use Tx/Rx training results */
+ mask = HPIPE_DFE_RES_FORCE_MASK;
+ data = 0 << HPIPE_DFE_RES_FORCE_OFFSET;
+ reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
+
+ debug("PRBS31 loppback\n\n");
+
/* Configure PRBS counters */
mask = HPIPE_PHY_TEST_PATTERN_SEL_MASK;
data = 0xe << HPIPE_PHY_TEST_PATTERN_SEL_OFFSET;
reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
mask = HPIPE_PHY_TEST_DATA_MASK;
- data = 0x64 << HPIPE_PHY_TEST_DATA_OFFSET;
+ data = 0xc4 << HPIPE_PHY_TEST_DATA_OFFSET;
reg_set(hpipe_addr + HPIPE_PHY_TEST_DATA_REG, data, mask);
mask = HPIPE_PHY_TEST_EN_MASK;
data = 0x1 << HPIPE_PHY_TEST_EN_OFFSET;
reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
- mdelay(50);
-
- /* Set the FFE value */
- mask = HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK;
- data = ffe << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET;
- reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
-
- /* Start RX training */
- mask = SD_EXTERNAL_STATUS_START_RX_TRAINING_MASK;
- data = 1 << SD_EXTERNAL_STATUS_START_RX_TRAINING_OFFSET;
- reg_set(sd_ip_addr + SD_EXTERNAL_STATUS_REG, data, mask);
+ mdelay(10);
+ debug("Enable TX/RX training\n\n");
+
+ mask = HPIPE_TRX_RX_TRAIN_EN_MASK;
+ data = 0x1 << HPIPE_TRX_RX_TRAIN_EN_OFFSET;
+ mask |= HPIPE_TRX_RX_ANA_IF_CLK_ENE_MASK;
+ data |= 0x1 << HPIPE_TRX_RX_ANA_IF_CLK_ENE_OFFSET;
+ mask |= HPIPE_TRX_TX_CTRL_CLK_EN_MASK;
+ data |= 0x1 << HPIPE_TRX_TX_CTRL_CLK_EN_OFFSET;
+ mask |= HPIPE_TRX_UPDATE_THEN_HOLD_MASK;
+ data |= 0x1 << HPIPE_TRX_UPDATE_THEN_HOLD_OFFSET;
+ mask |= HPIPE_TRX_TX_F0T_EO_BASED_MASK;
+ data |= 0x1 << HPIPE_TRX_TX_F0T_EO_BASED_OFFSET;
+ reg_set(hpipe_addr + HPIPE_TRX_TRAIN_CTRL_0_REG, data, mask);
/* Check the result of RX training */
timeout = RX_TRAINING_TIMEOUT;
+ mask = HPIPE_INTERRUPT_TRX_TRAIN_DONE_OFFSET |
+ HPIPE_INTERRUPT_DFE_DONE_INT_OFFSET |
+ HPIPE_INTERRUPT_RX_TRAIN_COMPLETE_INT_MASK;
while (timeout) {
- data = mmio_read_32(sd_ip_addr + SD_EXTERNAL_STATAUS1_REG);
- if (data & SD_EXTERNAL_STATAUS1_REG_RX_TRAIN_COMP_MASK)
+ data = mmio_read_32(hpipe_addr + HPIPE_INTERRUPT_1_REGISTER);
+ if (data & mask)
break;
mdelay(1);
timeout--;
}
- if (timeout == 0)
+ debug("RX training result: interrupt reg 0x%lx = 0x%x\n\n",
+ hpipe_addr + HPIPE_INTERRUPT_1_REGISTER, data);
+
+ if (timeout == 0 || data & HPIPE_TRX_TRAIN_TIME_OUT_INT_MASK) {
+ ERROR("Rx training timeout...\n");
return -ETIMEDOUT;
+ }
- if (data & SD_EXTERNAL_STATAUS1_REG_RX_TRAIN_FAILED_MASK)
+ if (data & HPIPE_TRX_TRAIN_FAILED_MASK) {
+ ERROR("Rx training failed...\n");
return -EINVAL;
+ }
- /* Stop RX training */
- mask = SD_EXTERNAL_STATUS_START_RX_TRAINING_MASK;
- data = 0 << SD_EXTERNAL_STATUS_START_RX_TRAINING_OFFSET;
- reg_set(sd_ip_addr + SD_EXTERNAL_STATUS_REG, data, mask);
+ mask = HPIPE_TRX_RX_TRAIN_EN_MASK;
+ data = 0x0 << HPIPE_TRX_RX_TRAIN_EN_OFFSET;
+ reg_set(hpipe_addr + HPIPE_TRX_TRAIN_CTRL_0_REG, data, mask);
+
+ debug("Training done, reading results...\n\n");
+
+ mask = HPIPE_ADAPTED_FFE_ADAPTED_FFE_RES_MASK;
+ g1_ffe_res_sel = ((mmio_read_32(hpipe_addr +
+ HPIPE_ADAPTED_FFE_CAPACITOR_COUNTER_CTRL_REG)
+ & mask) >> HPIPE_ADAPTED_FFE_ADAPTED_FFE_RES_OFFSET);
+
+ mask = HPIPE_ADAPTED_FFE_ADAPTED_FFE_CAP_MASK;
+ g1_ffe_cap_sel = ((mmio_read_32(hpipe_addr +
+ HPIPE_ADAPTED_FFE_CAPACITOR_COUNTER_CTRL_REG)
+ & mask) >> HPIPE_ADAPTED_FFE_ADAPTED_FFE_CAP_OFFSET);
+
+ mask = HPIPE_DATA_PHASE_ADAPTED_OS_PH_MASK;
+ align90 = ((mmio_read_32(hpipe_addr + HPIPE_DATA_PHASE_OFF_CTRL_REG)
+ & mask) >> HPIPE_DATA_PHASE_ADAPTED_OS_PH_OFFSET);
+
+ mask = HPIPE_ADAPTED_DFE_RES_MASK;
+ g1_dfe_res = ((mmio_read_32(hpipe_addr +
+ HPIPE_ADAPTED_DFE_COEFFICIENT_1_REG)
+ & mask) >> HPIPE_ADAPTED_DFE_RES_OFFSET);
+
+ debug("================================================\n");
+ debug("Switching to static configuration:\n");
+ debug("FFE_RES = 0x%x FFE_CAP = 0x%x align90 = 0x%x g1_dfe_res 0x%x\n",
+ g1_ffe_res_sel, g1_ffe_cap_sel, align90, g1_dfe_res);
+ debug("Result after training: 0x%lx= 0x%x, 0x%lx= 0x%x, 0x%lx = 0x%x\n",
+ (hpipe_addr + HPIPE_ADAPTED_FFE_CAPACITOR_COUNTER_CTRL_REG),
+ mmio_read_32(hpipe_addr +
+ HPIPE_ADAPTED_FFE_CAPACITOR_COUNTER_CTRL_REG),
+ (hpipe_addr + HPIPE_DATA_PHASE_OFF_CTRL_REG),
+ mmio_read_32(hpipe_addr + HPIPE_DATA_PHASE_OFF_CTRL_REG),
+ (hpipe_addr + HPIPE_ADAPTED_DFE_COEFFICIENT_1_REG),
+ mmio_read_32(hpipe_addr + HPIPE_ADAPTED_DFE_COEFFICIENT_1_REG));
+ debug("================================================\n");
+
+ /* Update FFE_RES */
+ mask = HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_MASK;
+ data = g1_ffe_res_sel << HPIPE_G1_SETTINGS_3_G1_FFE_RES_SEL_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
- /* Read the result */
- data = mmio_read_32(hpipe_addr + HPIPE_SAVED_DFE_VALUES_REG);
- data &= HPIPE_SAVED_DFE_VALUES_SAV_F0D_MASK;
- data >>= HPIPE_SAVED_DFE_VALUES_SAV_F0D_OFFSET;
- *result = data;
+ /* Update FFE_CAP */
+ mask = HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK;
+ data = g1_ffe_cap_sel << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
- mask = HPIPE_PHY_TEST_RESET_MASK;
- data = 0x1 << HPIPE_PHY_TEST_RESET_OFFSET;
- mask |= HPIPE_PHY_TEST_EN_MASK;
- data |= 0x0 << HPIPE_PHY_TEST_EN_OFFSET;
- reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
+ /* Bypass the FFE table settings and use the FFE settings directly from
+ * registers FFE_RES_SEL and FFE_CAP_SEL
+ */
+ mask = HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK;
+ data = 1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
- mask = HPIPE_PHY_TEST_RESET_MASK;
- data = 0x0 << HPIPE_PHY_TEST_RESET_OFFSET;
- reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
+ /* Use the value from CAL_OS_PH_EXT */
+ mask = HPIPE_CAL_RXCLKALIGN_90_EXT_EN_MASK;
+ data = 1 << HPIPE_CAL_RXCLKALIGN_90_EXT_EN_OFFSET;
+ reg_set(hpipe_addr + HPIPE_RX_CLK_ALIGN90_AND_TX_IDLE_CALIB_CTRL_REG,
+ data, mask);
- return 0;
-}
-
-/* This function runs complete RX training sequence:
- * - Run RX training for all possible Feed Forward Equalization values
- * - Choose the FFE which gives the best result.
- * - Run RX training again with the best result.
- *
- * Return '0' on success, error code in a case of failure.
- */
-int mvebu_cp110_comphy_xfi_rx_training(uint64_t comphy_base,
- uint8_t comphy_index)
-{
- uint32_t mask, data, max_rx_train = 0, max_rx_train_index = 0;
- uintptr_t hpipe_addr;
- uint32_t rx_train_result;
- int ret, i;
+ /* Update align90 */
+ mask = HPIPE_CAL_OS_PH_EXT_MASK;
+ data = align90 << HPIPE_CAL_OS_PH_EXT_OFFSET;
+ reg_set(hpipe_addr + HPIPE_RX_CLK_ALIGN90_AND_TX_IDLE_CALIB_CTRL_REG,
+ data, mask);
- hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
- comphy_index);
+ /* Force DFE resolution (use gen table value) */
+ mask = HPIPE_DFE_RES_FORCE_MASK;
+ data = 0x0 << HPIPE_DFE_RES_FORCE_OFFSET;
+ reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
- debug_enter();
+ /* 0x111-G1 DFE_Setting_4 */
+ mask = HPIPE_G1_SETTINGS_4_G1_DFE_RES_MASK;
+ data = g1_dfe_res << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G1_SETTINGS_4_REG, data, mask);
- /* Configure SQ threshold and CDR lock */
- mask = HPIPE_SQUELCH_THRESH_IN_MASK;
- data = 0xc << HPIPE_SQUELCH_THRESH_IN_OFFSET;
- reg_set(hpipe_addr + HPIPE_SQUELCH_FFE_SETTING_REG, data, mask);
-
- mask = HPIPE_SQ_DEGLITCH_WIDTH_P_MASK;
- data = 0xf << HPIPE_SQ_DEGLITCH_WIDTH_P_OFFSET;
- mask |= HPIPE_SQ_DEGLITCH_WIDTH_N_MASK;
- data |= 0xf << HPIPE_SQ_DEGLITCH_WIDTH_N_OFFSET;
- mask |= HPIPE_SQ_DEGLITCH_EN_MASK;
- data |= 0x1 << HPIPE_SQ_DEGLITCH_EN_OFFSET;
- reg_set(hpipe_addr + HPIPE_SQ_GLITCH_FILTER_CTRL, data, mask);
-
- mask = HPIPE_CDR_LOCK_DET_EN_MASK;
- data = 0x1 << HPIPE_CDR_LOCK_DET_EN_OFFSET;
- reg_set(hpipe_addr + HPIPE_LOOPBACK_REG, data, mask);
+ debug("PRBS31 loppback\n\n");
- udelay(100);
+ mask = HPIPE_PHY_TEST_PT_TESTMODE_MASK;
+ data = 0x1 << HPIPE_PHY_TEST_PT_TESTMODE_OFFSET;
+ reg_set(hpipe_addr + HPIPE_PHY_TEST_OOB_0_REGISTER, data, mask);
- /* Determine if we have a cable attached to this comphy, if not,
- * we can't perform RX training.
- */
- data = mmio_read_32(hpipe_addr + HPIPE_SQUELCH_FFE_SETTING_REG);
- if (data & HPIPE_SQUELCH_DETECTED_MASK) {
- ERROR("Squelsh is not detected, can't perform RX training\n");
- return -EINVAL;
- }
-
- data = mmio_read_32(hpipe_addr + HPIPE_LOOPBACK_REG);
- if (!(data & HPIPE_CDR_LOCK_MASK)) {
- ERROR("CDR is not locked, can't perform RX training\n");
- return -EINVAL;
- }
+ /* Configure PRBS counters */
+ mask = HPIPE_PHY_TEST_PATTERN_SEL_MASK;
+ data = 0xe << HPIPE_PHY_TEST_PATTERN_SEL_OFFSET;
+ reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
- /* Do preparations for RX training */
- mask = HPIPE_DFE_RES_FORCE_MASK;
- data = 0x0 << HPIPE_DFE_RES_FORCE_OFFSET;
- reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
+ mask = HPIPE_PHY_TEST_DATA_MASK;
+ data = 0xc4 << HPIPE_PHY_TEST_DATA_OFFSET;
+ reg_set(hpipe_addr + HPIPE_PHY_TEST_DATA_REG, data, mask);
- mask = HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_MASK;
- data = 0xf << HPIPE_G1_SETTINGS_3_G1_FFE_CAP_SEL_OFFSET;
- mask |= HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_MASK;
- data |= 1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
- reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
+ mask = HPIPE_PHY_TEST_EN_MASK;
+ data = 0x1 << HPIPE_PHY_TEST_EN_OFFSET;
+ reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
- /* Perform RX training for all possible FFE (Feed Forward
- * Equalization, possible values are 0-7).
- * We update the best value reached and the FFE which gave this value.
- */
- for (i = 0; i < MAX_NUM_OF_FFE; i++) {
- rx_train_result = 0;
- ret = mvebu_cp110_comphy_test_single_ffe(comphy_base,
- comphy_index, i,
- &rx_train_result);
-
- if ((!ret) && (rx_train_result > max_rx_train)) {
- max_rx_train = rx_train_result;
- max_rx_train_index = i;
- }
- }
+ /* Reset PRBS error counter */
+ mask = HPIPE_PHY_TEST_PATTERN_SEL_MASK;
+ data = 0x1 << HPIPE_PHY_TEST_RESET_OFFSET;
+ reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
- /* If we were able to determine which FFE gives the best value,
- * now we need to set it and run RX training again (only for this
- * FFE).
- */
- if (max_rx_train) {
- ret = mvebu_cp110_comphy_test_single_ffe(comphy_base,
- comphy_index,
- max_rx_train_index,
- &rx_train_result);
-
- if (ret == 0)
- debug("RX Training passed (FFE = %d, result = 0x%x)\n",
- max_rx_train_index, rx_train_result);
- } else {
- ERROR("RX Training failed for comphy%d\n", comphy_index);
- ret = -EINVAL;
- }
+ mask = HPIPE_PHY_TEST_PATTERN_SEL_MASK;
+ data = 0x0 << HPIPE_PHY_TEST_RESET_OFFSET;
+ reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
- debug_exit();
+ mask = HPIPE_PHY_TEST_PT_TESTMODE_MASK;
+ data = 0x1 << HPIPE_PHY_TEST_PT_TESTMODE_OFFSET;
+ reg_set(hpipe_addr + HPIPE_PHY_TEST_OOB_0_REGISTER, data, mask);
+
+ printf("########################################################\n");
+ printf("# To use trained values update the ATF sources:\n");
+ printf("# plat/marvell/a8k/<board_type>/board/phy-porting-layer.h ");
+ printf("file\n# with new values as below (for appropriate AP nr %d",
+ ap_nr);
+ printf("and CP nr: %d comphy_index %d\n\n",
+ cp_nr, comphy_index);
+ printf("static struct xfi_params xfi_static_values_tab[AP_NUM]");
+ printf("[CP_NUM][MAX_LANE_NR] = {\n");
+ printf("\t...\n");
+ printf("\t.g1_ffe_res_sel = 0x%x,\n", g1_ffe_res_sel);
+ printf("\t.g1_ffe_cap_sel = 0x%x,\n", g1_ffe_cap_sel);
+ printf("\t.align90 = 0x%x,\n", align90);
+ printf("\t.g1_dfe_res = 0x%x\n", g1_dfe_res);
+ printf("\t...\n");
+ printf("};\n\n");
+ printf("########################################################\n");
+
+ /* check */
+ debug("PRBS error counter[0x%lx] 0x%x\n\n",
+ hpipe_addr + HPIPE_PHY_TEST_PRBS_ERROR_COUNTER_1_REG,
+ mmio_read_32(hpipe_addr +
+ HPIPE_PHY_TEST_PRBS_ERROR_COUNTER_1_REG));
+
+ rx_trainng_done[ap_nr][cp_nr][comphy_index] = 1;
- return ret;
+ return 0;
}
/* During AP the proper mode is auto-negotiated and the mac, pcs and serdes
@@ -2237,6 +2345,7 @@ int mvebu_cp110_comphy_power_on(uint64_t comphy_base, uint8_t comphy_index,
err = mvebu_cp110_comphy_rxaui_power_on(comphy_base,
comphy_index,
comphy_mode);
+ break;
case (COMPHY_USB3H_MODE):
case (COMPHY_USB3D_MODE):
err = mvebu_cp110_comphy_usb3_power_on(comphy_base,
@@ -2261,9 +2370,18 @@ int mvebu_cp110_comphy_power_off(uint64_t comphy_base, uint8_t comphy_index)
{
uintptr_t sd_ip_addr, comphy_ip_addr;
uint32_t mask, data;
+ uint8_t ap_nr, cp_nr;
debug_enter();
+ mvebu_cp110_get_ap_and_cp_nr(&ap_nr, &cp_nr, comphy_base);
+
+ if (rx_trainng_done[ap_nr][cp_nr][comphy_index]) {
+ debug("Skip %s for comphy[%d][%d][%d], due to rx training\n",
+ __func__, ap_nr, cp_nr, comphy_index);
+ return 0;
+ }
+
sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
comphy_index);
comphy_ip_addr = COMPHY_ADDR(comphy_base, comphy_index);
diff --git a/drivers/marvell/comphy/phy-comphy-cp110.h b/drivers/marvell/comphy/phy-comphy-cp110.h
index 2461e5ca9..70dbfbfce 100644
--- a/drivers/marvell/comphy/phy-comphy-cp110.h
+++ b/drivers/marvell/comphy/phy-comphy-cp110.h
@@ -5,7 +5,79 @@
* https://spdx.org/licenses
*/
-/* Marvell CP110 SoC COMPHY unit driver */
+/* Those are parameters for xfi mode, which need to be tune for each board type.
+ * For known DB boards the parameters was already calibrated and placed under
+ * the plat/marvell/a8k/<board_type>/board/phy-porting-layer.h
+ */
+struct xfi_params {
+ uint8_t g1_ffe_res_sel;
+ uint8_t g1_ffe_cap_sel;
+ uint8_t align90;
+ uint8_t g1_dfe_res;
+ uint8_t g1_amp;
+ uint8_t g1_emph;
+ uint8_t g1_emph_en;
+ uint8_t g1_tx_amp_adj;
+ uint8_t g1_tx_emph_en;
+ uint8_t g1_tx_emph;
+ uint8_t g1_rx_selmuff;
+ uint8_t g1_rx_selmufi;
+ uint8_t g1_rx_selmupf;
+ uint8_t g1_rx_selmupi;
+ _Bool valid;
+};
+
+struct sata_params {
+ uint8_t g1_amp;
+ uint8_t g2_amp;
+ uint8_t g3_amp;
+
+ uint8_t g1_emph;
+ uint8_t g2_emph;
+ uint8_t g3_emph;
+
+ uint8_t g1_emph_en;
+ uint8_t g2_emph_en;
+ uint8_t g3_emph_en;
+
+ uint8_t g1_tx_amp_adj;
+ uint8_t g2_tx_amp_adj;
+ uint8_t g3_tx_amp_adj;
+
+ uint8_t g1_tx_emph_en;
+ uint8_t g2_tx_emph_en;
+ uint8_t g3_tx_emph_en;
+
+ uint8_t g1_tx_emph;
+ uint8_t g2_tx_emph;
+ uint8_t g3_tx_emph;
+
+ uint8_t g3_dfe_res;
+
+ uint8_t g3_ffe_res_sel;
+
+ uint8_t g3_ffe_cap_sel;
+
+ uint8_t align90;
+
+ uint8_t g1_rx_selmuff;
+ uint8_t g2_rx_selmuff;
+ uint8_t g3_rx_selmuff;
+
+ uint8_t g1_rx_selmufi;
+ uint8_t g2_rx_selmufi;
+ uint8_t g3_rx_selmufi;
+
+ uint8_t g1_rx_selmupf;
+ uint8_t g2_rx_selmupf;
+ uint8_t g3_rx_selmupf;
+
+ uint8_t g1_rx_selmupi;
+ uint8_t g2_rx_selmupi;
+ uint8_t g3_rx_selmupi;
+
+ _Bool valid;
+};
int mvebu_cp110_comphy_is_pll_locked(uint64_t comphy_base,
uint8_t comphy_index);
diff --git a/drivers/marvell/comphy/phy-default-porting-layer.h b/drivers/marvell/comphy/phy-default-porting-layer.h
new file mode 100644
index 000000000..39cd1819a
--- /dev/null
+++ b/drivers/marvell/comphy/phy-default-porting-layer.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __PHY_DEFAULT_PORTING_LAYER_H
+#define __PHY_DEFAULT_PORTING_LAYER_H
+
+
+#define MAX_LANE_NR 6
+
+#warning "Using default comphy params - you may need to suit them to your board"
+
+static const struct xfi_params
+ xfi_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = {
+ [0 ... AP_NUM-1][0 ... CP_NUM-1][0 ... MAX_LANE_NR-1] = {
+ .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf, .align90 = 0x5f,
+ .g1_dfe_res = 0x2, .g1_amp = 0x1c, .g1_emph = 0xe,
+ .g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1, .g1_tx_emph_en = 0x1,
+ .g1_tx_emph = 0x0, .g1_rx_selmuff = 0x1, .g1_rx_selmufi = 0x0,
+ .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2, .valid = 1
+ }
+};
+
+static const struct sata_params
+ sata_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = {
+ [0 ... AP_NUM-1][0 ... CP_NUM-1][0 ... MAX_LANE_NR-1] = {
+ .g1_amp = 0x8, .g2_amp = 0xa, .g3_amp = 0x1e,
+ .g1_emph = 0x1, .g2_emph = 0x2, .g3_emph = 0xe,
+ .g1_emph_en = 0x1, .g2_emph_en = 0x1, .g3_emph_en = 0x1,
+ .g1_tx_amp_adj = 0x1, .g2_tx_amp_adj = 0x1,
+ .g3_tx_amp_adj = 0x1,
+ .g1_tx_emph_en = 0x0, .g2_tx_emph_en = 0x0,
+ .g3_tx_emph_en = 0x0,
+ .g1_tx_emph = 0x1, .g2_tx_emph = 0x1, .g3_tx_emph = 0x1,
+ .g3_dfe_res = 0x1, .g3_ffe_res_sel = 0x4, .g3_ffe_cap_sel = 0xf,
+ .align90 = 0x61,
+ .g1_rx_selmuff = 0x3, .g2_rx_selmuff = 0x3,
+ .g3_rx_selmuff = 0x3,
+ .g1_rx_selmufi = 0x0, .g2_rx_selmufi = 0x0,
+ .g3_rx_selmufi = 0x3,
+ .g1_rx_selmupf = 0x1, .g2_rx_selmupf = 0x1,
+ .g3_rx_selmupf = 0x2,
+ .g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0,
+ .g3_rx_selmupi = 0x2,
+ .valid = 0x1
+ },
+};
+#endif /* __PHY_DEFAULT_PORTING_LAYER_H */
diff --git a/plat/marvell/a8k/a70x0/platform.mk b/plat/marvell/a8k/a70x0/platform.mk
index 29dfd9537..d3a01676e 100644
--- a/plat/marvell/a8k/a70x0/platform.mk
+++ b/plat/marvell/a8k/a70x0/platform.mk
@@ -7,6 +7,9 @@
PCI_EP_SUPPORT := 0
+CP_NUM := 1
+$(eval $(call add_define,CP_NUM))
+
DOIMAGE_SEC := tools/doimage/secure/sec_img_7K.cfg
MARVELL_MOCHI_DRV := drivers/marvell/mochi/apn806_setup.c
diff --git a/plat/marvell/a8k/a70x0_amc/platform.mk b/plat/marvell/a8k/a70x0_amc/platform.mk
index 29dfd9537..d3a01676e 100644
--- a/plat/marvell/a8k/a70x0_amc/platform.mk
+++ b/plat/marvell/a8k/a70x0_amc/platform.mk
@@ -7,6 +7,9 @@
PCI_EP_SUPPORT := 0
+CP_NUM := 1
+$(eval $(call add_define,CP_NUM))
+
DOIMAGE_SEC := tools/doimage/secure/sec_img_7K.cfg
MARVELL_MOCHI_DRV := drivers/marvell/mochi/apn806_setup.c
diff --git a/plat/marvell/a8k/a80x0/board/phy-porting-layer.h b/plat/marvell/a8k/a80x0/board/phy-porting-layer.h
new file mode 100644
index 000000000..da391ebee
--- /dev/null
+++ b/plat/marvell/a8k/a80x0/board/phy-porting-layer.h
@@ -0,0 +1,167 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __PHY_PORTING_LAYER_H
+#define __PHY_PORTING_LAYER_H
+
+#define MAX_LANE_NR 6
+
+static const struct xfi_params
+ xfi_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = {
+ /* AP0 */
+ {
+ /* CP 0 */
+ {
+ { 0 }, /* Comphy0 */
+ { 0 }, /* Comphy1 */
+ { .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf,
+ .align90 = 0x5f,
+ .g1_dfe_res = 0x2, .g1_amp = 0x1c, .g1_emph = 0xe,
+ .g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1,
+ .g1_tx_emph_en = 0x1, .g1_tx_emph = 0x0,
+ .g1_rx_selmuff = 0x1, .g1_rx_selmufi = 0x0,
+ .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2,
+ .valid = 0x1 }, /* Comphy2 */
+ { 0 }, /* Comphy3 */
+ { 0 }, /* Comphy4 */
+ { 0 }, /* Comphy5 */
+ },
+
+ /* CP 1 */
+ {
+ { 0 }, /* Comphy0 */
+ { 0 }, /* Comphy1 */
+ { .g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf,
+ .align90 = 0x5f,
+ .g1_dfe_res = 0x2, .g1_amp = 0x1c, .g1_emph = 0xe,
+ .g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1,
+ .g1_tx_emph_en = 0x1, .g1_tx_emph = 0x0,
+ .g1_rx_selmuff = 0x1, .g1_rx_selmufi = 0x0,
+ .g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2,
+ .valid = 0x1 }, /* Comphy2 */
+ { 0 }, /* Comphy3 */
+ { 0 }, /* Comphy4 */
+ { 0 }, /* Comphy5 */
+ },
+ },
+};
+
+static const struct sata_params
+ sata_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = {
+ /* AP0 */
+ {
+ /* CP 0 */
+ {
+ { 0 }, /* Comphy0 */
+ { .g1_amp = 0x8, .g2_amp = 0xa, .g3_amp = 0x1e,
+ .g1_emph = 0x1, .g2_emph = 0x2, .g3_emph = 0xe,
+ .g1_emph_en = 0x1, .g2_emph_en = 0x1,
+ .g3_emph_en = 0x1,
+ .g1_tx_amp_adj = 0x1, .g2_tx_amp_adj = 0x1,
+ .g3_tx_amp_adj = 0x1,
+ .g1_tx_emph_en = 0x0, .g2_tx_emph_en = 0x0,
+ .g3_tx_emph_en = 0x0,
+ .g1_tx_emph = 0x1, .g2_tx_emph = 0x1,
+ .g3_tx_emph = 0x1,
+ .g3_dfe_res = 0x1, .g3_ffe_res_sel = 0x4,
+ .g3_ffe_cap_sel = 0xf,
+ .align90 = 0x61,
+ .g1_rx_selmuff = 0x3, .g2_rx_selmuff = 0x3,
+ .g3_rx_selmuff = 0x3,
+ .g1_rx_selmufi = 0x0, .g2_rx_selmufi = 0x0,
+ .g3_rx_selmufi = 0x3,
+ .g1_rx_selmupf = 0x1, .g2_rx_selmupf = 0x1,
+ .g3_rx_selmupf = 0x2,
+ .g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0,
+ .g3_rx_selmupi = 0x2,
+ .valid = 0x1
+ }, /* Comphy1 */
+ { 0 }, /* Comphy2 */
+ { .g1_amp = 0x8, .g2_amp = 0xa, .g3_amp = 0x1e,
+ .g1_emph = 0x1, .g2_emph = 0x2, .g3_emph = 0xe,
+ .g1_emph_en = 0x1, .g2_emph_en = 0x1,
+ .g3_emph_en = 0x1,
+ .g1_tx_amp_adj = 0x1, .g2_tx_amp_adj = 0x1,
+ .g3_tx_amp_adj = 0x1,
+ .g1_tx_emph_en = 0x0, .g2_tx_emph_en = 0x0,
+ .g3_tx_emph_en = 0x0,
+ .g1_tx_emph = 0x1, .g2_tx_emph = 0x1,
+ .g3_tx_emph = 0x1,
+ .g3_dfe_res = 0x1, .g3_ffe_res_sel = 0x4,
+ .g3_ffe_cap_sel = 0xf,
+ .align90 = 0x61,
+ .g1_rx_selmuff = 0x3, .g2_rx_selmuff = 0x3,
+ .g3_rx_selmuff = 0x3,
+ .g1_rx_selmufi = 0x0, .g2_rx_selmufi = 0x0,
+ .g3_rx_selmufi = 0x3,
+ .g1_rx_selmupf = 0x1, .g2_rx_selmupf = 0x1,
+ .g3_rx_selmupf = 0x2,
+ .g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0,
+ .g3_rx_selmupi = 0x2,
+ .valid = 0x1
+ }, /* Comphy3 */
+ { 0 }, /* Comphy4 */
+ { 0 }, /* Comphy5 */
+ },
+
+ /* CP 1 */
+ {
+ { 0 }, /* Comphy0 */
+ { .g1_amp = 0x8, .g2_amp = 0xa, .g3_amp = 0x1e,
+ .g1_emph = 0x1, .g2_emph = 0x2, .g3_emph = 0xe,
+ .g1_emph_en = 0x1, .g2_emph_en = 0x1,
+ .g3_emph_en = 0x1,
+ .g1_tx_amp_adj = 0x1, .g2_tx_amp_adj = 0x1,
+ .g3_tx_amp_adj = 0x1,
+ .g1_tx_emph_en = 0x0, .g2_tx_emph_en = 0x0,
+ .g3_tx_emph_en = 0x0,
+ .g1_tx_emph = 0x1, .g2_tx_emph = 0x1,
+ .g3_tx_emph = 0x1,
+ .g3_dfe_res = 0x1, .g3_ffe_res_sel = 0x4,
+ .g3_ffe_cap_sel = 0xf,
+ .align90 = 0x61,
+ .g1_rx_selmuff = 0x3, .g2_rx_selmuff = 0x3,
+ .g3_rx_selmuff = 0x3,
+ .g1_rx_selmufi = 0x0, .g2_rx_selmufi = 0x0,
+ .g3_rx_selmufi = 0x3,
+ .g1_rx_selmupf = 0x1, .g2_rx_selmupf = 0x1,
+ .g3_rx_selmupf = 0x2,
+ .g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0,
+ .g3_rx_selmupi = 0x2,
+ .valid = 0x1
+ }, /* Comphy1 */
+ { 0 }, /* Comphy2 */
+ { .g1_amp = 0x8, .g2_amp = 0xa, .g3_amp = 0x1e,
+ .g1_emph = 0x1, .g2_emph = 0x2, .g3_emph = 0xe,
+ .g1_emph_en = 0x1, .g2_emph_en = 0x1,
+ .g3_emph_en = 0x1,
+ .g1_tx_amp_adj = 0x1, .g2_tx_amp_adj = 0x1,
+ .g3_tx_amp_adj = 0x1,
+ .g1_tx_emph_en = 0x0, .g2_tx_emph_en = 0x0,
+ .g3_tx_emph_en = 0x0,
+ .g1_tx_emph = 0x1, .g2_tx_emph = 0x1,
+ .g3_tx_emph = 0x1,
+ .g3_dfe_res = 0x1, .g3_ffe_res_sel = 0x4,
+ .g3_ffe_cap_sel = 0xf,
+ .align90 = 0x61,
+ .g1_rx_selmuff = 0x3, .g2_rx_selmuff = 0x3,
+ .g3_rx_selmuff = 0x3,
+ .g1_rx_selmufi = 0x0, .g2_rx_selmufi = 0x0,
+ .g3_rx_selmufi = 0x3,
+ .g1_rx_selmupf = 0x1, .g2_rx_selmupf = 0x1,
+ .g3_rx_selmupf = 0x2,
+ .g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0,
+ .g3_rx_selmupi = 0x2,
+ .valid = 0x1
+ }, /* Comphy3 */
+ { 0 }, /* Comphy4 */
+ { 0 }, /* Comphy5 */
+
+ },
+ },
+};
+#endif /* __PHY_PORTING_LAYER_H */
diff --git a/plat/marvell/a8k/a80x0/platform.mk b/plat/marvell/a8k/a80x0/platform.mk
index 0fe235b67..00d24b278 100644
--- a/plat/marvell/a8k/a80x0/platform.mk
+++ b/plat/marvell/a8k/a80x0/platform.mk
@@ -7,6 +7,9 @@
PCI_EP_SUPPORT := 0
+CP_NUM := 2
+$(eval $(call add_define,CP_NUM))
+
DOIMAGE_SEC := tools/doimage/secure/sec_img_8K.cfg
MARVELL_MOCHI_DRV := drivers/marvell/mochi/apn806_setup.c
@@ -14,3 +17,4 @@ MARVELL_MOCHI_DRV := drivers/marvell/mochi/apn806_setup.c
include plat/marvell/a8k/common/a8k_common.mk
include plat/marvell/common/marvell_common.mk
+PLAT_INCLUDES += -Iplat/marvell/a8k/a80x0/board
diff --git a/plat/marvell/a8k/a80x0_mcbin/platform.mk b/plat/marvell/a8k/a80x0_mcbin/platform.mk
index 0fe235b67..3749c3781 100644
--- a/plat/marvell/a8k/a80x0_mcbin/platform.mk
+++ b/plat/marvell/a8k/a80x0_mcbin/platform.mk
@@ -7,6 +7,9 @@
PCI_EP_SUPPORT := 0
+CP_NUM := 2
+$(eval $(call add_define,CP_NUM))
+
DOIMAGE_SEC := tools/doimage/secure/sec_img_8K.cfg
MARVELL_MOCHI_DRV := drivers/marvell/mochi/apn806_setup.c
diff --git a/plat/marvell/a8k/common/a8k_common.mk b/plat/marvell/a8k/common/a8k_common.mk
index 49745cecf..a42481f5a 100644
--- a/plat/marvell/a8k/common/a8k_common.mk
+++ b/plat/marvell/a8k/common/a8k_common.mk
@@ -25,6 +25,10 @@ $(eval $(call add_define,BL31_CACHE_DISABLE))
$(eval $(call add_define,PCI_EP_SUPPORT))
$(eval $(call assert_boolean,PCI_EP_SUPPORT))
+
+AP_NUM := 1
+$(eval $(call add_define,AP_NUM))
+
DOIMAGEPATH ?= tools/doimage
DOIMAGETOOL ?= ${DOIMAGEPATH}/doimage
diff --git a/plat/marvell/a8k/common/include/a8k_plat_def.h b/plat/marvell/a8k/common/include/a8k_plat_def.h
index 1b7e95462..55ad00247 100644
--- a/plat/marvell/a8k/common/include/a8k_plat_def.h
+++ b/plat/marvell/a8k/common/include/a8k_plat_def.h
@@ -28,7 +28,10 @@
#define MVEBU_REGS_BASE 0xF0000000
#define MVEBU_REGS_BASE_MASK 0xF0000000
#define MVEBU_REGS_BASE_AP(ap) MVEBU_REGS_BASE
-#define MVEBU_CP_REGS_BASE(cp_index) (0xF2000000 + (cp_index) * 0x2000000)
+#define MVEBU_AP_IO_BASE(ap) 0xF2000000
+#define MVEBU_CP_OFFSET 0x2000000
+#define MVEBU_CP_REGS_BASE(cp_index) (MVEBU_AP_IO_BASE(0) + \
+ (cp_index) * MVEBU_CP_OFFSET)
#define MVEBU_RFU_BASE (MVEBU_REGS_BASE + 0x6F0000)
#define MVEBU_IO_WIN_BASE(ap_index) (MVEBU_RFU_BASE)
#define MVEBU_IO_WIN_GCR_OFFSET (0x70)
generated by cgit v1.2.3 (git 2.25.1) at 2025-06-15 19:38:56 +0000