diff options
Diffstat (limited to 'Platforms')
21 files changed, 5404 insertions, 36 deletions
diff --git a/Platforms/Hisilicon/DeviceTree/hi3660-hikey960.dtb b/Platforms/Hisilicon/DeviceTree/hi3660-hikey960.dtb Binary files differnew file mode 100644 index 0000000..8f6cdde --- /dev/null +++ b/Platforms/Hisilicon/DeviceTree/hi3660-hikey960.dtb diff --git a/Platforms/Hisilicon/DeviceTree/hi3660-hikey960.dts b/Platforms/Hisilicon/DeviceTree/hi3660-hikey960.dts new file mode 100644 index 0000000..c699962 --- /dev/null +++ b/Platforms/Hisilicon/DeviceTree/hi3660-hikey960.dts @@ -0,0 +1,599 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hisilicon HiKey960 Development Board + * + * Copyright (C) 2016, Hisilicon Ltd. + * + */ + +/dts-v1/; + +#include "hi3660.dtsi" +#include "hikey960-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "HiKey960"; + compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660"; + + aliases { + mshc1 = &dwmmc1; + mshc2 = &dwmmc2; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + }; + + chosen { + stdout-path = "serial6:115200n8"; + }; + + memory@0 { + device_type = "memory"; + /* rewrite this at bootloader */ + reg = <0x0 0x0 0x0 0x0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@32000000 { + compatible = "ramoops"; + reg = <0x0 0x32000000 0x0 0x00100000>; + record-size = <0x00020000>; + console-size = <0x00020000>; + ftrace-size = <0x00020000>; + }; + }; + + reboot-mode-syscon@32100000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x32100000 0x0 0x00001000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x0>; + + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>; + + power { + wakeup-source; + gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <KEY_POWER>; + }; + }; + + leds { + compatible = "gpio-leds"; + + user_led1 { + label = "user_led1"; + /* gpio_150_user_led1 */ + gpios = <&gpio18 6 0>; + linux,default-trigger = "heartbeat"; + }; + + user_led2 { + label = "user_led2"; + /* gpio_151_user_led2 */ + gpios = <&gpio18 7 0>; + linux,default-trigger = "mmc0"; + }; + + user_led3 { + label = "user_led3"; + /* gpio_189_user_led3 */ + gpios = <&gpio23 5 0>; + default-state = "off"; + }; + + user_led4 { + label = "user_led4"; + /* gpio_190_user_led4 */ + gpios = <&gpio23 6 0>; + panic-indicator; + linux,default-trigger = "cpu0"; + }; + + wlan_active_led { + label = "wifi_active"; + /* gpio_205_wifi_active */ + gpios = <&gpio25 5 0>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led { + label = "bt_active"; + gpios = <&gpio25 7 0>; + /* gpio_207_user_led1 */ + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + }; + + pmic: pmic@fff34000 { + compatible = "hisilicon,hi6421v530-pmic"; + reg = <0x0 0xfff34000 0x0 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + ldo3: LDO3 { /* HDMI */ + regulator-name = "VOUT3_1V85"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo9: LDO9 { /* SDCARD I/O */ + regulator-name = "VOUT9_1V8_2V95"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + }; + + ldo11: LDO11 { /* Low Speed Connector */ + regulator-name = "VOUT11_1V8_2V95"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + }; + + ldo15: LDO15 { /* UFS VCC */ + regulator-name = "VOUT15_3V0"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + regulator-enable-ramp-delay = <120>; + }; + + ldo16: LDO16 { /* SD VDD */ + regulator-name = "VOUT16_2V95"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <360>; + }; + }; + }; + + wlan_en: wlan-en-1-8v { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* GPIO_051_WIFI_EN */ + gpio = <&gpio6 3 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; +}; + +/* + * Legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * "" = no idea, schematic doesn't say, could be + * unrouted (not connected to any external pin) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from "HiKey 960 Board ver A" schematics + * from Huawei. The 40 pin low speed expansion connector is named + * J2002 63453-140LF. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ +&gpio0 { + /* GPIO_000-GPIO_007 */ + gpio-line-names = + "", + "TP901", /* TEST_MODE connected to TP901 */ + "[PMU0_SSI]", + "[PMU1_SSI]", + "[PMU2_SSI]", + "[PMU0_CLKOUT]", + "[JTAG_TCK]", + "[JTAG_TMS]"; +}; + +&gpio1 { + /* GPIO_008-GPIO_015 */ + gpio-line-names = + "[JTAG_TRST_N]", + "[JTAG_TDI]", + "[JTAG_TDO]", + "NC", "NC", + "[I2C3_SCL]", + "[I2C3_SDA]", + "NC"; +}; + +&gpio2 { + /* GPIO_016-GPIO_023 */ + gpio-line-names = + "NC", "NC", "NC", + "GPIO-J", /* LSEC pin 32: GPIO_019 */ + "GPIO_020_HDMI_SEL", + "GPIO-L", /* LSEC pin 34: GPIO_021 */ + "GPIO_022_UFSBUCK_INT_N", + "GPIO-G"; /* LSEC pin 29: LCD_TE0 */ +}; + +&gpio3 { + /* GPIO_024-GPIO_031 */ + /* The rail from pin BK36 is named LCD_TE0, we assume to be muxed as GPIO for GPIO-G */ + gpio-line-names = + "[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */ + "[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */ + "NC", + "[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */ + "[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */ + "[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */ + "[I2C3_SDA]", /* HSEC pin 38: ISP_SDA1 */ + "NC"; +}; + +&gpio4 { + /* GPIO_032-GPIO_039 */ + gpio-line-names = + "NC", "NC", + "PWR_BTN_N", /* LSEC pin 4: GPIO_034_PWRON_DET */ + "GPIO_035_PMU2_EN", + "GPIO_036_USB_HUB_RESET", + "NC", "NC", "NC"; +}; + +&gpio5 { + /* GPIO_040-GPIO_047 */ + gpio-line-names = + "GPIO-H", /* LSEC pin 30: GPIO_040_LCD_RST_N */ + "GPIO_041_HDMI_PD", + "TP904", /* Test point */ + "TP905", /* Test point */ + "NC", "NC", + "GPIO_046_HUB_VDD33_EN", + "GPIO_047_PMU1_EN"; +}; + +&gpio6 { + /* GPIO_048-GPIO_055 */ + gpio-line-names = + "NC", "NC", "NC", + "GPIO_051_WIFI_EN", + "GPIO-I", /* LSEC pin 31: GPIO_052_CAM0_RST_N */ + /* + * These two pins should be used for SD(IO) data according to the + * 96boards specification but seems to be repurposed for a IRDA UART. + * They are however named according to the spec. + */ + "[SD_DAT1]", /* HSEC pin 3: UART0_IRDA_RXD */ + "[SD_DAT2]", /* HSEC pin 5: UART0_IRDA_TXD */ + "[UART1_RXD]"; /* LSEC pin 13: DEBUG_UART6_RXD */ +}; + +&gpio7 { + /* GPIO_056-GPIO_063 */ + gpio-line-names = + "[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */ + "[UART0_CTS]", /* LSEC pin 3: UART3_CTS_N */ + "[UART0_RTS]", /* LSEC pin 9: UART3_RTS_N */ + "[UART0_RXD]", /* LSEC pin 7: UART3_RXD */ + "[UART0_TXD]", /* LSEC pin 5: UART3_TXD */ + "[SOC_BT_UART4_CTS_N]", + "[SOC_BT_UART4_RTS_N]", + "[SOC_BT_UART4_RXD]"; +}; + +&gpio8 { + /* GPIO_064-GPIO_071 */ + gpio-line-names = + "[SOC_BT_UART4_TXD]", + "NC", + "[PMU_HKADC_SSI]", + "NC", + "GPIO_068_SEL", + "NC", "NC", "NC"; + +}; + +&gpio9 { + /* GPIO_072-GPIO_079 */ + gpio-line-names = + "NC", "NC", "NC", + "GPIO-K", /* LSEC pin 33: GPIO_075_CAM1_RST_N */ + "NC", "NC", "NC", "NC"; +}; + +&gpio10 { + /* GPIO_080-GPIO_087 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio11 { + /* GPIO_088-GPIO_095 */ + gpio-line-names = + "NC", + "[PCIE_PERST_N]", + "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio12 { + /* GPIO_096-GPIO_103 */ + gpio-line-names = "NC", "NC", "NC", "", "", "", "", "NC"; +}; + +&gpio13 { + /* GPIO_104-GPIO_111 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio14 { + /* GPIO_112-GPIO_119 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio15 { + /* GPIO_120-GPIO_127 */ + gpio-line-names = + "NC", "NC", "NC", "NC", "NC", "NC", + "GPIO_126_BT_EN", + "TP902"; /* GPIO_127_JTAG_SEL0 */ +}; + +&gpio16 { + /* GPIO_128-GPIO_135 */ + gpio-line-names = "", "", "", "", "", "", "", ""; +}; + +&gpio17 { + /* GPIO_136-GPIO_143 */ + gpio-line-names = "", "", "", "", "", "", "", ""; +}; + +&gpio18 { + /* GPIO_144-GPIO_151 */ + gpio-line-names = + "[UFS_REF_CLK]", + "[UFS_RST_N]", + "[SPI1_SCLK]", /* HSEC pin 9: GPIO_146_SPI3_CLK */ + "[SPI1_DIN]", /* HSEC pin 11: GPIO_147_SPI3_DI */ + "[SPI1_DOUT]", /* HSEC pin 1: GPIO_148_SPI3_DO */ + "[SPI1_CS]", /* HSEC pin 7: GPIO_149_SPI3_CS0_N */ + "GPIO_150_USER_LED1", + "GPIO_151_USER_LED2"; +}; + +&gpio19 { + /* GPIO_152-GPIO_159 */ + gpio-line-names = "NC", "NC", "NC", "NC", "", "", "", ""; +}; + +&gpio20 { + /* GPIO_160-GPIO_167 */ + gpio-line-names = + "[SD_CLK]", + "[SD_CMD]", + "[SD_DATA0]", + "[SD_DATA1]", + "[SD_DATA2]", + "[SD_DATA3]", + "", ""; +}; + +&gpio21 { + /* GPIO_168-GPIO_175 */ + gpio-line-names = + "[WL_SDIO_CLK]", + "[WL_SDIO_CMD]", + "[WL_SDIO_DATA0]", + "[WL_SDIO_DATA1]", + "[WL_SDIO_DATA2]", + "[WL_SDIO_DATA3]", + "", ""; +}; + +&gpio22 { + /* GPIO_176-GPIO_183 */ + gpio-line-names = + "[GPIO_176_PMU_PWR_HOLD]", + "NA", + "[SYSCLK_EN]", + "GPIO_179_WL_WAKEUP_AP", + "GPIO_180_HDMI_INT", + "NA", + "GPIO-F", /* LSEC pin 28: LCD_BL_PWM */ + "[I2C0_SCL]"; /* LSEC pin 15 */ +}; + +&gpio23 { + /* GPIO_184-GPIO_191 */ + gpio-line-names = + "[I2C0_SDA]", /* LSEC pin 17 */ + "[I2C1_SCL]", /* Actual SoC I2C1 */ + "[I2C1_SDA]", /* Actual SoC I2C1 */ + "[I2C1_SCL]", /* LSEC pin 19: I2C7_SCL */ + "[I2C1_SDA]", /* LSEC pin 21: I2C7_SDA */ + "GPIO_189_USER_LED3", + "GPIO_190_USER_LED4", + ""; +}; + +&gpio24 { + /* GPIO_192-GPIO_199 */ + gpio-line-names = + "[PCM_DI]", /* LSEC pin 22: GPIO_192_I2S0_DI */ + "[PCM_DO]", /* LSEC pin 20: GPIO_193_I2S0_DO */ + "[PCM_CLK]", /* LSEC pin 18: GPIO_194_I2S0_XCLK */ + "[PCM_FS]", /* LSEC pin 16: GPIO_195_I2S0_XFS */ + "[GPIO_196_I2S2_DI]", + "[GPIO_197_I2S2_DO]", + "[GPIO_198_I2S2_XCLK]", + "[GPIO_199_I2S2_XFS]"; +}; + +&gpio25 { + /* GPIO_200-GPIO_207 */ + gpio-line-names = + "NC", + "NC", + "GPIO_202_VBUS_TYPEC", + "GPIO_203_SD_DET", + "GPIO_204_PMU12_IRQ_N", + "GPIO_205_WIFI_ACTIVE", + "GPIO_206_USBSW_SEL", + "GPIO_207_BT_ACTIVE"; +}; + +&gpio26 { + /* GPIO_208-GPIO_215 */ + gpio-line-names = + "GPIO-A", /* LSEC pin 23: GPIO_208 */ + "GPIO-B", /* LSEC pin 24: GPIO_209 */ + "GPIO-C", /* LSEC pin 25: GPIO_210 */ + "GPIO-D", /* LSEC pin 26: GPIO_211 */ + "GPIO-E", /* LSEC pin 27: GPIO_212 */ + "[PCIE_CLKREQ_N]", + "[PCIE_WAKE_N]", + "[SPI0_CLK]"; /* LSEC pin 8: SPI2_CLK */ +}; + +&gpio27 { + /* GPIO_216-GPIO_223 */ + gpio-line-names = + "[SPI0_DIN]", /* LSEC pin 10: SPI2_DI */ + "[SPI0_DOUT]", /* LSEC pin 14: SPI2_DO */ + "[SPI0_CS]", /* LSEC pin 12: SPI2_CS0_N */ + "GPIO_219_CC_INT", + "NC", + "NC", + "[PMU_INT]", + ""; +}; + +&gpio28 { + /* GPIO_224-GPIO_231 */ + gpio-line-names = + "", "", "", "", "", "", "", ""; +}; + +&i2c0 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + adv7533: adv7533@39 { + status = "ok"; + compatible = "adi,adv7533"; + reg = <0x39>; + }; +}; + +&i2c7 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; + +&uart3 { + /* On Low speed expansion */ + label = "LS-UART0"; + status = "okay"; +}; + +&uart4 { + status = "okay"; + + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>; + max-speed = <3000000>; + }; +}; + +&uart6 { + /* On Low speed expansion */ + label = "LS-UART1"; + status = "okay"; +}; + +&spi2 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; + +&spi3 { + /* On High speed expansion */ + label = "HS-SPI1"; + status = "okay"; +}; + +&dwmmc1 { + vmmc-supply = <&ldo16>; + vqmmc-supply = <&ldo9>; + status = "okay"; +}; + +&dwmmc2 { /* WIFI */ + broken-cd; + /* WL_EN */ + vmmc-supply = <&wlan_en>; + ti,non-removable; + non-removable; + #address-cells = <0x1>; + #size-cells = <0x0>; + status = "ok"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; /* sdio func num */ + /* WL_IRQ, GPIO_179_WL_WAKEUP_AP */ + interrupt-parent = <&gpio22>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + }; +}; diff --git a/Platforms/Hisilicon/DeviceTree/hi3660.dtsi b/Platforms/Hisilicon/DeviceTree/hi3660.dtsi new file mode 100644 index 0000000..c694a34 --- /dev/null +++ b/Platforms/Hisilicon/DeviceTree/hi3660.dtsi @@ -0,0 +1,1022 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hisilicon Hi3660 SoC + * + * Copyright (C) 2016, Hisilicon Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/hi3660-clock.h> + +/ { + compatible = "hisilicon,hi3660"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; + }; + + cpu4: cpu@100 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&A73_L2>; + cpu-idle-states = < + &CPU_NAP + &CPU_SLEEP + &CLUSTER_SLEEP_1 + >; + capacity-dmips-mhz = <1024>; + }; + + cpu5: cpu@101 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&A73_L2>; + cpu-idle-states = < + &CPU_NAP + &CPU_SLEEP + &CLUSTER_SLEEP_1 + >; + capacity-dmips-mhz = <1024>; + }; + + cpu6: cpu@102 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x102>; + enable-method = "psci"; + next-level-cache = <&A73_L2>; + cpu-idle-states = < + &CPU_NAP + &CPU_SLEEP + &CLUSTER_SLEEP_1 + >; + capacity-dmips-mhz = <1024>; + }; + + cpu7: cpu@103 { + compatible = "arm,cortex-a73", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x103>; + enable-method = "psci"; + next-level-cache = <&A73_L2>; + cpu-idle-states = < + &CPU_NAP + &CPU_SLEEP + &CLUSTER_SLEEP_1 + >; + capacity-dmips-mhz = <1024>; + }; + + idle-states { + entry-method = "psci"; + + CPU_NAP: cpu-nap { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0000001>; + entry-latency-us = <7>; + exit-latency-us = <2>; + min-residency-us = <15>; + }; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <40>; + exit-latency-us = <70>; + min-residency-us = <3000>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <500>; + exit-latency-us = <5000>; + min-residency-us = <20000>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <1000>; + exit-latency-us = <5000>; + min-residency-us = <20000>; + }; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + + A73_L2: l2-cache1 { + compatible = "cache"; + }; + }; + + gic: interrupt-controller@e82b0000 { + compatible = "arm,gic-400"; + reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */ + <0x0 0xe82b2000 0 0x2000>, /* GICC */ + <0x0 0xe82b4000 0 0x2000>, /* GICH */ + <0x0 0xe82b6000 0 0x2000>; /* GICV */ + #address-cells = <0>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + a53-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + }; + + a73-pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu4>, + <&cpu5>, + <&cpu6>, + <&cpu7>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + crg_ctrl: crg_ctrl@fff35000 { + compatible = "hisilicon,hi3660-crgctrl", "syscon"; + reg = <0x0 0xfff35000 0x0 0x1000>; + #clock-cells = <1>; + }; + + crg_rst: crg_rst_controller { + compatible = "hisilicon,hi3660-reset"; + #reset-cells = <2>; + hisi,rst-syscon = <&crg_ctrl>; + }; + + + pctrl: pctrl@e8a09000 { + compatible = "hisilicon,hi3660-pctrl", "syscon"; + reg = <0x0 0xe8a09000 0x0 0x2000>; + #clock-cells = <1>; + }; + + pmuctrl: crg_ctrl@fff34000 { + compatible = "hisilicon,hi3660-pmuctrl", "syscon"; + reg = <0x0 0xfff34000 0x0 0x1000>; + #clock-cells = <1>; + }; + + sctrl: sctrl@fff0a000 { + compatible = "hisilicon,hi3660-sctrl", "syscon"; + reg = <0x0 0xfff0a000 0x0 0x1000>; + #clock-cells = <1>; + }; + + iomcu: iomcu@ffd7e000 { + compatible = "hisilicon,hi3660-iomcu", "syscon"; + reg = <0x0 0xffd7e000 0x0 0x1000>; + #clock-cells = <1>; + + }; + + iomcu_rst: reset { + compatible = "hisilicon,hi3660-reset"; + hisi,rst-syscon = <&iomcu>; + #reset-cells = <2>; + }; + + dual_timer0: timer@fff14000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x0 0xfff14000 0x0 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_OSC32K>, + <&crg_ctrl HI3660_OSC32K>, + <&crg_ctrl HI3660_OSC32K>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + i2c0: i2c@ffd71000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xffd71000 0x0 0x1000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>; + resets = <&iomcu_rst 0x20 3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; + status = "disabled"; + }; + + i2c1: i2c@ffd72000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xffd72000 0x0 0x1000>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C1>; + resets = <&iomcu_rst 0x20 4>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>; + status = "disabled"; + }; + + i2c3: i2c@fdf0c000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xfdf0c000 0x0 0x1000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C3>; + resets = <&crg_rst 0x78 7>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>; + status = "disabled"; + }; + + i2c7: i2c@fdf0b000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xfdf0b000 0x0 0x1000>; + interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C7>; + resets = <&crg_rst 0x60 14>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_pmx_func &i2c7_cfg_func>; + status = "disabled"; + }; + + uart0: serial@fdf02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf02000 0x0 0x1000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; + status = "disabled"; + }; + + uart1: serial@fdf00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf00000 0x0 0x1000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>, + <&crg_ctrl HI3660_CLK_GATE_UART1>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>; + status = "disabled"; + }; + + uart2: serial@fdf03000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf03000 0x0 0x1000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; + status = "disabled"; + }; + + uart3: serial@ffd74000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xffd74000 0x0 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_FACTOR_UART3>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; + status = "disabled"; + }; + + uart4: serial@fdf01000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf01000 0x0 0x1000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>, + <&crg_ctrl HI3660_CLK_GATE_UART4>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; + status = "disabled"; + }; + + uart5: serial@fdf05000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf05000 0x0 0x1000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>, + <&crg_ctrl HI3660_CLK_GATE_UART5>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pmx_func &uart5_cfg_func>; + status = "disabled"; + }; + + uart6: serial@fff32000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfff32000 0x0 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_UART6>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>; + status = "disabled"; + }; + + dma0: dma@fdf30000 { + compatible = "hisilicon,k3-dma-1.0"; + reg = <0x0 0xfdf30000 0x0 0x1000>; + #dma-cells = <1>; + dma-channels = <16>; + dma-requests = <32>; + dma-min-chan = <1>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_DMAC>; + dma-no-cci; + dma-type = "hi3660_dma"; + }; + + rtc0: rtc@fff04000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x0 0Xfff04000 0x0 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + }; + + gpio0: gpio@e8a0b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0b000 0 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 1 0 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO0>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@e8a0c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0c000 0 0x1000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 1 7 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO1>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@e8a0d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0d000 0 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 14 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO2>; + clock-names = "apb_pclk"; + }; + + gpio3: gpio@e8a0e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0e000 0 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 22 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO3>; + clock-names = "apb_pclk"; + }; + + gpio4: gpio@e8a0f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0f000 0 0x1000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 30 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO4>; + clock-names = "apb_pclk"; + }; + + gpio5: gpio@e8a10000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a10000 0 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 38 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO5>; + clock-names = "apb_pclk"; + }; + + gpio6: gpio@e8a11000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a11000 0 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 46 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO6>; + clock-names = "apb_pclk"; + }; + + gpio7: gpio@e8a12000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a12000 0 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 54 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO7>; + clock-names = "apb_pclk"; + }; + + gpio8: gpio@e8a13000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a13000 0 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 62 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO8>; + clock-names = "apb_pclk"; + }; + + gpio9: gpio@e8a14000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a14000 0 0x1000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 70 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO9>; + clock-names = "apb_pclk"; + }; + + gpio10: gpio@e8a15000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a15000 0 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 78 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO10>; + clock-names = "apb_pclk"; + }; + + gpio11: gpio@e8a16000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a16000 0 0x1000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 86 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO11>; + clock-names = "apb_pclk"; + }; + + gpio12: gpio@e8a17000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a17000 0 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 94 3 &pmx0 7 101 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO12>; + clock-names = "apb_pclk"; + }; + + gpio13: gpio@e8a18000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a18000 0 0x1000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 102 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO13>; + clock-names = "apb_pclk"; + }; + + gpio14: gpio@e8a19000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a19000 0 0x1000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 110 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO14>; + clock-names = "apb_pclk"; + }; + + gpio15: gpio@e8a1a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a1a000 0 0x1000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 118 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO15>; + clock-names = "apb_pclk"; + }; + + gpio16: gpio@e8a1b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a1b000 0 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO16>; + clock-names = "apb_pclk"; + }; + + gpio17: gpio@e8a1c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a1c000 0 0x1000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO17>; + clock-names = "apb_pclk"; + }; + + gpio18: gpio@ff3b4000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xff3b4000 0 0x1000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx2 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO18>; + clock-names = "apb_pclk"; + }; + + gpio19: gpio@ff3b5000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xff3b5000 0 0x1000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx2 0 8 4>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO19>; + clock-names = "apb_pclk"; + }; + + gpio20: gpio@e8a1f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a1f000 0 0x1000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx1 0 0 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO20>; + clock-names = "apb_pclk"; + }; + + gpio21: gpio@e8a20000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a20000 0 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&pmx3 0 0 6>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO21>; + clock-names = "apb_pclk"; + }; + + gpio22: gpio@fff0b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0b000 0 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO176 */ + gpio-ranges = <&pmx4 2 0 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO0>; + clock-names = "apb_pclk"; + }; + + gpio23: gpio@fff0c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0c000 0 0x1000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO184 */ + gpio-ranges = <&pmx4 0 6 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO1>; + clock-names = "apb_pclk"; + }; + + gpio24: gpio@fff0d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0d000 0 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO192 */ + gpio-ranges = <&pmx4 0 13 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO2>; + clock-names = "apb_pclk"; + }; + + gpio25: gpio@fff0e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0e000 0 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO200 */ + gpio-ranges = <&pmx4 0 21 4 &pmx4 5 25 3>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO3>; + clock-names = "apb_pclk"; + }; + + gpio26: gpio@fff0f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0f000 0 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO208 */ + gpio-ranges = <&pmx4 0 28 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO4>; + clock-names = "apb_pclk"; + }; + + gpio27: gpio@fff10000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff10000 0 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO216 */ + gpio-ranges = <&pmx4 0 36 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO5>; + clock-names = "apb_pclk"; + }; + + gpio28: gpio@fff1d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff1d000 0 0x1000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO6>; + clock-names = "apb_pclk"; + }; + + spi2: spi@ffd68000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xffd68000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_SPI2>; + clock-names = "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pmx_func>; + num-cs = <1>; + cs-gpios = <&gpio27 2 0>; + status = "disabled"; + }; + + spi3: spi@ff3b3000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xff3b3000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_SPI3>; + clock-names = "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pmx_func>; + num-cs = <1>; + cs-gpios = <&gpio18 5 0>; + status = "disabled"; + }; + + pcie@f4000000 { + compatible = "hisilicon,kirin960-pcie"; + reg = <0x0 0xf4000000 0x0 0x1000>, + <0x0 0xff3fe000 0x0 0x1000>, + <0x0 0xf3f20000 0x0 0x40000>, + <0x0 0xf5000000 0x0 0x2000>; + reg-names = "dbi", "apb", "phy", "config"; + bus-range = <0x0 0x1>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x00000000 + 0x0 0xf6000000 + 0x0 0x02000000>; + num-lanes = <1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0 0 0 1 + &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 2 + &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 3 + &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 4 + &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_PCIEPHY_REF>, + <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>, + <&crg_ctrl HI3660_ACLK_GATE_PCIE>; + clock-names = "pcie_phy_ref", "pcie_aux", + "pcie_apb_phy", "pcie_apb_sys", + "pcie_aclk"; + reset-gpios = <&gpio11 1 0 >; + }; + + /* UFS */ + ufs: ufs@ff3b0000 { + compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1"; + /* 0: HCI standard */ + /* 1: UFS SYS CTRL */ + reg = <0x0 0xff3b0000 0x0 0x1000>, + <0x0 0xff3b1000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>, + <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>; + clock-names = "ref_clk", "phy_clk"; + freq-table-hz = <0 0>, <0 0>; + /* offset: 0x84; bit: 12 */ + /* offset: 0x84; bit: 7 */ + resets = <&crg_rst 0x84 12>, + <&crg_rst 0x84 7>; + reset-names = "rst", "assert"; + }; + + /* SD */ + dwmmc1: dwmmc1@ff37f000 { + #address-cells = <1>; + #size-cells = <0>; + cd-inverted; + compatible = "hisilicon,hi3660-dw-mshc"; + num-slots = <1>; + bus-width = <0x4>; + disable-wp; + cap-sd-highspeed; + supports-highspeed; + card-detect-delay = <200>; + reg = <0x0 0xff37f000 0x0 0x1000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_SD>, + <&crg_ctrl HI3660_HCLK_GATE_SD>; + clock-names = "ciu", "biu"; + clock-frequency = <3200000>; + resets = <&crg_rst 0x94 18>; + reset-names = "reset"; + cd-gpios = <&gpio25 3 0>; + hisilicon,peripheral-syscon = <&sctrl>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_pmx_func + &sd_clk_cfg_func + &sd_cfg_func>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "disabled"; + + slot@0 { + reg = <0x0>; + bus-width = <4>; + disable-wp; + }; + }; + + /* SDIO */ + dwmmc2: dwmmc2@ff3ff000 { + compatible = "hisilicon,hi3660-dw-mshc"; + reg = <0x0 0xff3ff000 0x0 0x1000>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + num-slots = <1>; + clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>, + <&crg_ctrl HI3660_HCLK_GATE_SDIO0>; + clock-names = "ciu", "biu"; + resets = <&crg_rst 0x94 20>; + reset-names = "reset"; + card-detect-delay = <200>; + supports-highspeed; + keep-power-in-suspend; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pmx_func + &sdio_clk_cfg_func + &sdio_cfg_func>; + status = "disabled"; + }; + + watchdog0: watchdog@e8a06000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xe8a06000 0x0 0x1000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_OSC32K>; + clock-names = "apb_pclk"; + }; + + watchdog1: watchdog@e8a07000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xe8a07000 0x0 0x1000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_OSC32K>; + clock-names = "apb_pclk"; + }; + + tsensor: tsensor@fff30000 { + compatible = "hisilicon,hi3660-tsensor"; + reg = <0x0 0xfff30000 0x0 0x1000>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; + }; +}; diff --git a/Platforms/Hisilicon/DeviceTree/hi6220-coresight.dtsi b/Platforms/Hisilicon/DeviceTree/hi6220-coresight.dtsi new file mode 100644 index 0000000..7afee5d --- /dev/null +++ b/Platforms/Hisilicon/DeviceTree/hi6220-coresight.dtsi @@ -0,0 +1,381 @@ +/* + * dtsi file for Hisilicon Hi6220 coresight + * + * Copyright (C) 2017 Hisilicon Ltd. + * + * Author: Pengcheng Li <lipengcheng8@huawei.com> + * Leo Yan <leo.yan@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + */ + +/ { + soc { + funnel@f6401000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0xf6401000 0 0x1000>; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + soc_funnel_out: endpoint { + remote-endpoint = + <&etf_in>; + }; + }; + + port@1 { + reg = <0>; + soc_funnel_in: endpoint { + slave-mode; + remote-endpoint = + <&acpu_funnel_out>; + }; + }; + }; + }; + + etf@f6402000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xf6402000 0 0x1000>; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + etf_in: endpoint { + slave-mode; + remote-endpoint = + <&soc_funnel_out>; + }; + }; + + port@1 { + reg = <0>; + etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + }; + + replicator { + compatible = "arm,coresight-replicator"; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_in: endpoint { + slave-mode; + remote-endpoint = + <&etf_out>; + }; + }; + + port@1 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = + <&etr_in>; + }; + }; + + port@2 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = + <&tpiu_in>; + }; + }; + }; + }; + + etr@f6404000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xf6404000 0 0x1000>; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + etr_in: endpoint { + slave-mode; + remote-endpoint = + <&replicator_out0>; + }; + }; + }; + }; + + tpiu@f6405000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0 0xf6405000 0 0x1000>; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tpiu_in: endpoint { + slave-mode; + remote-endpoint = + <&replicator_out1>; + }; + }; + }; + }; + + funnel@f6501000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0xf6501000 0 0x1000>; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + acpu_funnel_out: endpoint { + remote-endpoint = + <&soc_funnel_in>; + }; + }; + + port@1 { + reg = <0>; + acpu_funnel_in0: endpoint { + slave-mode; + remote-endpoint = + <&etm0_out>; + }; + }; + + port@2 { + reg = <1>; + acpu_funnel_in1: endpoint { + slave-mode; + remote-endpoint = + <&etm1_out>; + }; + }; + + port@3 { + reg = <2>; + acpu_funnel_in2: endpoint { + slave-mode; + remote-endpoint = + <&etm2_out>; + }; + }; + + port@4 { + reg = <3>; + acpu_funnel_in3: endpoint { + slave-mode; + remote-endpoint = + <&etm3_out>; + }; + }; + + port@5 { + reg = <4>; + acpu_funnel_in4: endpoint { + slave-mode; + remote-endpoint = + <&etm4_out>; + }; + }; + + port@6 { + reg = <5>; + acpu_funnel_in5: endpoint { + slave-mode; + remote-endpoint = + <&etm5_out>; + }; + }; + + port@7 { + reg = <6>; + acpu_funnel_in6: endpoint { + slave-mode; + remote-endpoint = + <&etm6_out>; + }; + }; + + port@8 { + reg = <7>; + acpu_funnel_in7: endpoint { + slave-mode; + remote-endpoint = + <&etm7_out>; + }; + }; + }; + }; + + etm@f659c000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf659c000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu0>; + + port { + etm0_out: endpoint { + remote-endpoint = + <&acpu_funnel_in0>; + }; + }; + }; + + etm@f659d000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf659d000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu1>; + + port { + etm1_out: endpoint { + remote-endpoint = + <&acpu_funnel_in1>; + }; + }; + }; + + etm@f659e000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf659e000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu2>; + + port { + etm2_out: endpoint { + remote-endpoint = + <&acpu_funnel_in2>; + }; + }; + }; + + etm@f659f000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf659f000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu3>; + + port { + etm3_out: endpoint { + remote-endpoint = + <&acpu_funnel_in3>; + }; + }; + }; + + etm@f65dc000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf65dc000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu4>; + + port { + etm4_out: endpoint { + remote-endpoint = + <&acpu_funnel_in4>; + }; + }; + }; + + etm@f65dd000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf65dd000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu5>; + + port { + etm5_out: endpoint { + remote-endpoint = + <&acpu_funnel_in5>; + }; + }; + }; + + etm@f65de000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf65de000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu6>; + + port { + etm6_out: endpoint { + remote-endpoint = + <&acpu_funnel_in6>; + }; + }; + }; + + etm@f65df000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf65df000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu7>; + + port { + etm7_out: endpoint { + remote-endpoint = + <&acpu_funnel_in7>; + }; + }; + }; + }; +}; diff --git a/Platforms/Hisilicon/DeviceTree/hi6220-hikey.dtb b/Platforms/Hisilicon/DeviceTree/hi6220-hikey.dtb Binary files differnew file mode 100644 index 0000000..8e0872f --- /dev/null +++ b/Platforms/Hisilicon/DeviceTree/hi6220-hikey.dtb diff --git a/Platforms/Hisilicon/DeviceTree/hi6220-hikey.dts b/Platforms/Hisilicon/DeviceTree/hi6220-hikey.dts new file mode 100644 index 0000000..e94fa1a --- /dev/null +++ b/Platforms/Hisilicon/DeviceTree/hi6220-hikey.dts @@ -0,0 +1,548 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hisilicon HiKey Development Board + * + * Copyright (C) 2015, Hisilicon Ltd. + * + */ + +/dts-v1/; +#include "hi6220.dtsi" +#include "hikey-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "HiKey Development Board"; + compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220"; + + aliases { + serial0 = &uart0; /* On board UART0 */ + serial1 = &uart1; /* BT UART */ + serial2 = &uart2; /* LS Expansion UART0 */ + serial3 = &uart3; /* LS Expansion UART1 */ + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + /* + * Reserve below regions from memory node: + * + * 0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using + * 0x05f0,1000 - 0x05f0,1fff: Reboot reason + * 0x06df,f000 - 0x06df,ffff: Mailbox message data + * 0x0740,f000 - 0x0740,ffff: MCU firmware section + * 0x21f0,0000 - 0x21ff,ffff: pstore/ramoops buffer + * 0x3e00,0000 - 0x3fff,ffff: OP-TEE + */ + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x05e00000>, + <0x00000000 0x05f00000 0x00000000 0x00001000>, + <0x00000000 0x05f02000 0x00000000 0x00efd000>, + <0x00000000 0x06e00000 0x00000000 0x0060f000>, + <0x00000000 0x07410000 0x00000000 0x1aaf0000>, + <0x00000000 0x22000000 0x00000000 0x1c000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@0x21f00000 { + compatible = "ramoops"; + reg = <0x0 0x21f00000 0x0 0x00100000>; + record-size = <0x00020000>; + console-size = <0x00020000>; + ftrace-size = <0x00020000>; + }; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x00000000 0x08000000>; + linux,cma-default; + }; + }; + + reboot-mode-syscon@5f01000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x05f01000 0x0 0x00001000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x0>; + + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; + }; + }; + + reg_sys_5v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "SYS_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_3v3: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + vin-supply = <®_sys_5v>; + }; + + reg_5v_hub: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "5V_HUB"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio0 7 0>; + regulator-always-on; + vin-supply = <®_sys_5v>; + }; + + wl1835_pwrseq: wl1835-pwrseq { + compatible = "mmc-pwrseq-simple"; + /* WLAN_EN GPIO */ + reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + clocks = <&pmic>; + clock-names = "ext_clock"; + power-off-delay-us = <10>; + }; + + soc { + spi0: spi@f7106000 { + status = "ok"; + }; + + i2c0: i2c@f7100000 { + status = "ok"; + }; + + i2c1: i2c@f7101000 { + status = "ok"; + }; + + uart1: uart@f7111000 { + assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>; + assigned-clock-rates = <150000000>; + status = "ok"; + + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + clocks = <&pmic>; + clock-names = "ext_clock"; + }; + }; + + uart2: uart@f7112000 { + status = "ok"; + }; + + uart3: uart@f7113000 { + status = "ok"; + }; + + /* + * Legend: proper name = the GPIO line is used as GPIO + * NC = not connected (not routed from the SoC) + * "[PER]" = pin is muxed for peripheral (not GPIO) + * "" = no idea, schematic doesn't say, could be + * unrouted (not connected to any external pin) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Pin assignments taken from LeMaker and CircuitCo Schematics + * Rev A1. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART2. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ + gpio0: gpio@f8011000 { + gpio-line-names = "PWR_HOLD", "DSI_SEL", + "USB_HUB_RESET_N", "USB_SEL", "HDMI_PD", "WL_REG_ON", + "PWRON_DET", "5V_HUB_EN"; + }; + + gpio1: gpio@f8012000 { + gpio-line-names = "SD_DET", "HDMI_INT", "PMU_IRQ_N", + "WL_HOST_WAKE", "NC", "NC", "NC", "BT_REG_ON"; + }; + + gpio2: gpio@f8013000 { + gpio-line-names = + "GPIO-A", /* LSEC Pin 23: GPIO2_0 */ + "GPIO-B", /* LSEC Pin 24: GPIO2_1 */ + "GPIO-C", /* LSEC Pin 25: GPIO2_2 */ + "GPIO-D", /* LSEC Pin 26: GPIO2_3 */ + "GPIO-E", /* LSEC Pin 27: GPIO2_4 */ + "USB_ID_DET", "USB_VBUS_DET", + "GPIO-H"; /* LSEC Pin 30: GPIO2_7 */ + }; + + gpio3: gpio@f8014000 { + gpio-line-names = "GPIO3_0", "NC", "NC", "", "NC", "", + "WLAN_ACTIVE", "NC", "NC"; + }; + + gpio4: gpio@f7020000 { + gpio-line-names = "USER_LED1", "USER_LED2", "USER_LED3", + "USER_LED4", "SD_SEL", "NC", "NC", "BT_ACTIVE"; + }; + + gpio5: gpio@f7021000 { + gpio-line-names = "NC", "NC", + "[UART1_RxD]", /* LSEC Pin 11: UART3_RX */ + "[UART1_TxD]", /* LSEC Pin 13: UART3_TX */ + "[AUX_SSI1]", "NC", + "[PCM_CLK]", /* LSEC Pin 18: MODEM_PCM_XCLK */ + "[PCM_FS]"; /* LSEC Pin 16: MODEM_PCM_XFS */ + }; + + gpio6: gpio@f7022000 { + gpio-line-names = + "[SPI0_DIN]", /* Pin 10: SPI0_DI */ + "[SPI0_DOUT]", /* Pin 14: SPI0_DO */ + "[SPI0_CS]", /* Pin 12: SPI0_CS_N */ + "[SPI0_SCLK]", /* Pin 8: SPI0_SCLK */ + "NC", "NC", "NC", + "GPIO-G"; /* Pin 29: GPIO6_7_DSI_TE0 */ + }; + + gpio7: gpio@f7023000 { + gpio-line-names = "NC", "NC", "NC", "NC", + "[PCM_DI]", /* Pin 22: MODEM_PCM_DI */ + "[PCM_DO]", /* Pin 20: MODEM_PCM_DO */ + "NC", "NC"; + }; + + gpio8: gpio@f7024000 { + gpio-line-names = "NC", "[CEC_CLK_19_2MHZ]", "NC", + "", "", "", "", "", ""; + }; + + gpio9: gpio@f7025000 { + gpio-line-names = "", + "GPIO-J", /* LSEC Pin 32: ISP_PWDN0_GPIO9_1 */ + "GPIO-L", /* LSEC Pin 34: ISP_PWDN1_GPIO9_2 */ + "NC", "NC", "NC", "NC", "[ISP_CCLK0]"; + }; + + gpio10: gpio@f7026000 { + gpio-line-names = "BOOT_SEL", + "[ISP_CCLK1]", + "GPIO-I", /* LSEC Pin 31: ISP_RSTB0_GPIO10_2 */ + "GPIO-K", /* LSEC Pin 33: ISP_RSTB1_GPIO10_3 */ + "NC", "NC", + "[I2C2_SDA]", /* HSEC Pin 34: ISP0_SDA */ + "[I2C2_SCL]"; /* HSEC Pin 32: ISP0_SCL */ + }; + + gpio11: gpio@f7027000 { + gpio-line-names = + "[I2C3_SDA]", /* HSEC Pin 38: ISP1_SDA */ + "[I2C3_SCL]", /* HSEC Pin 36: ISP1_SCL */ + "", "NC", "NC", "NC", "", ""; + }; + + gpio12: gpio@f7028000 { + gpio-line-names = "[BT_PCM_XFS]", "[BT_PCM_DI]", + "[BT_PCM_DO]", + "NC", "NC", "NC", "NC", + "GPIO-F"; /* LSEC Pin 28: BL_PWM_GPIO12_7 */ + }; + + gpio13: gpio@f7029000 { + gpio-line-names = "[UART0_RX]", "[UART0_TX]", + "[BT_UART1_CTS]", "[BT_UART1_RTS]", + "[BT_UART1_RX]", "[BT_UART1_TX]", + "[UART0_CTS]", /* LSEC Pin 3: UART2_CTS_N */ + "[UART0_RTS]"; /* LSEC Pin 9: UART2_RTS_N */ + }; + + gpio14: gpio@f702a000 { + gpio-line-names = + "[UART0_RxD]", /* LSEC Pin 7: UART2_RX */ + "[UART0_TxD]", /* LSEC Pin 5: UART2_TX */ + "[I2C0_SCL]", /* LSEC Pin 15: I2C0_SCL */ + "[I2C0_SDA]", /* LSEC Pin 17: I2C0_SDA */ + "[I2C1_SCL]", /* LSEC Pin 19: I2C1_SCL */ + "[I2C1_SDA]", /* LSEC Pin 21: I2C1_SDA */ + "[I2C2_SCL]", "[I2C2_SDA]"; + }; + + gpio15: gpio@f702b000 { + gpio-line-names = "", "", "", "", "", "", "NC", ""; + }; + + /* GPIO blocks 16 thru 19 do not appear to be routed to pins */ + + dwmmc_0: dwmmc0@f723d000 { + cap-mmc-highspeed; + non-removable; + bus-width = <0x8>; + vmmc-supply = <&ldo19>; + }; + + dwmmc_1: dwmmc1@f723e000 { + card-detect-delay = <200>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + vqmmc-supply = <&ldo7>; + vmmc-supply = <&ldo10>; + bus-width = <0x4>; + disable-wp; + cd-gpios = <&gpio1 0 1>; + }; + + dwmmc_2: dwmmc2@f723f000 { + bus-width = <0x4>; + non-removable; + vmmc-supply = <®_vdd_3v3>; + mmc-pwrseq = <&wl1835_pwrseq>; + + #address-cells = <0x1>; + #size-cells = <0x0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; /* sdio func num */ + /* WL_IRQ, WL_HOST_WAKE_GPIO1_3 */ + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + user_led4 { + label = "user_led4"; + gpios = <&gpio4 0 0>; /* <&gpio_user_led_1>; */ + linux,default-trigger = "heartbeat"; + }; + + user_led3 { + label = "user_led3"; + gpios = <&gpio4 1 0>; /* <&gpio_user_led_2>; */ + linux,default-trigger = "mmc0"; + }; + + user_led2 { + label = "user_led2"; + gpios = <&gpio4 2 0>; /* <&gpio_user_led_3>; */ + linux,default-trigger = "mmc1"; + }; + + user_led1 { + label = "user_led1"; + gpios = <&gpio4 3 0>; /* <&gpio_user_led_4>; */ + panic-indicator; + linux,default-trigger = "cpu0"; + }; + + wlan_active_led { + label = "wifi_active"; + gpios = <&gpio3 5 0>; /* <&gpio_wlan_active_led>; */ + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led { + label = "bt_active"; + gpios = <&gpio4 7 0>; /* <&gpio_bt_active_led>; */ + linux,default-trigger = "hci0rx"; + default-state = "off"; + }; + }; + + pmic: pmic@f8000000 { + compatible = "hisilicon,hi655x-pmic"; + reg = <0x0 0xf8000000 0x0 0x1000>; + #clock-cells = <0>; + interrupt-controller; + #interrupt-cells = <2>; + pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + + regulators { + ldo2: LDO2 { + regulator-name = "LDO2_2V8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3200000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo7: LDO7 { + regulator-name = "LDO7_SDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo10: LDO10 { + regulator-name = "LDO10_2V85"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <360>; + }; + + ldo13: LDO13 { + regulator-name = "LDO13_1V8"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1950000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo14: LDO14 { + regulator-name = "LDO14_2V8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3200000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo15: LDO15 { + regulator-name = "LDO15_1V8"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1950000>; + regulator-boot-on; + regulator-always-on; + regulator-enable-ramp-delay = <120>; + }; + + ldo17: LDO17 { + regulator-name = "LDO17_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3200000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo19: LDO19 { + regulator-name = "LDO19_3V0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <360>; + }; + + ldo21: LDO21 { + regulator-name = "LDO21_1V8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-enable-ramp-delay = <120>; + }; + + ldo22: LDO22 { + regulator-name = "LDO22_1V2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + regulator-enable-ramp-delay = <120>; + }; + }; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + sound_card { + compatible = "audio-graph-card"; + dais = <&i2s0_port0>; + }; +}; + +&uart2 { + label = "LS-UART0"; +}; +&uart3 { + label = "LS-UART1"; +}; + +&ade { + status = "ok"; +}; + +&dsi { + status = "ok"; + + ports { + /* 1 for output port */ + port@1 { + reg = <1>; + + dsi_out0: endpoint@0 { + remote-endpoint = <&adv7533_in>; + }; + }; + }; +}; + +&i2c2 { + #address-cells = <1>; + #size-cells = <0>; + status = "ok"; + + adv7533: adv7533@39 { + compatible = "adi,adv7533"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <1 2>; + pd-gpio = <&gpio0 4 0>; + adi,dsi-lanes = <4>; + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + adv7533_in: endpoint { + remote-endpoint = <&dsi_out0>; + }; + }; + port@2 { + reg = <2>; + codec_endpoint: endpoint { + remote-endpoint = <&i2s0_cpu_endpoint>; + }; + }; + }; + }; +}; + +&i2s0 { + + ports { + i2s0_port0: port@0 { + i2s0_cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + dai-format = "i2s"; + }; + }; + }; +}; diff --git a/Platforms/Hisilicon/DeviceTree/hi6220.dtsi b/Platforms/Hisilicon/DeviceTree/hi6220.dtsi new file mode 100644 index 0000000..6a180d1 --- /dev/null +++ b/Platforms/Hisilicon/DeviceTree/hi6220.dtsi @@ -0,0 +1,991 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hisilicon Hi6220 SoC + * + * Copyright (C) 2015, Hisilicon Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/hisi,hi6220-resets.h> +#include <dt-bindings/clock/hi6220-clock.h> +#include <dt-bindings/pinctrl/hisi.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "hisilicon,hi6220"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <700>; + exit-latency-us = <250>; + min-residency-us = <1000>; + }; + + CLUSTER_SLEEP: cluster-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <1000>; + exit-latency-us = <700>; + min-residency-us = <2700>; + wakeup-latency-us = <1500>; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; + clocks = <&stub_clock 0>; + operating-points-v2 = <&cpu_opp_table>; + cooling-min-level = <4>; + cooling-max-level = <0>; + #cooling-cells = <2>; /* min followed by max */ + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <311>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; + operating-points-v2 = <&cpu_opp_table>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; + operating-points-v2 = <&cpu_opp_table>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; + operating-points-v2 = <&cpu_opp_table>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + }; + + cpu4: cpu@100 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&CLUSTER1_L2>; + operating-points-v2 = <&cpu_opp_table>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + }; + + cpu5: cpu@101 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&CLUSTER1_L2>; + operating-points-v2 = <&cpu_opp_table>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + }; + + cpu6: cpu@102 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x102>; + enable-method = "psci"; + next-level-cache = <&CLUSTER1_L2>; + operating-points-v2 = <&cpu_opp_table>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + }; + + cpu7: cpu@103 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x103>; + enable-method = "psci"; + next-level-cache = <&CLUSTER1_L2>; + operating-points-v2 = <&cpu_opp_table>; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + }; + + CLUSTER0_L2: l2-cache0 { + compatible = "cache"; + }; + + CLUSTER1_L2: l2-cache1 { + compatible = "cache"; + }; + }; + + cpu_opp_table: cpu_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <208000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <500000>; + }; + opp01 { + opp-hz = /bits/ 64 <432000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <500000>; + }; + opp02 { + opp-hz = /bits/ 64 <729000000>; + opp-microvolt = <1090000>; + clock-latency-ns = <500000>; + }; + opp03 { + opp-hz = /bits/ 64 <960000000>; + opp-microvolt = <1180000>; + clock-latency-ns = <500000>; + }; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1330000>; + clock-latency-ns = <500000>; + }; + }; + + gic: interrupt-controller@f6801000 { + compatible = "arm,gic-400"; + reg = <0x0 0xf6801000 0 0x1000>, /* GICD */ + <0x0 0xf6802000 0 0x2000>, /* GICC */ + <0x0 0xf6804000 0 0x2000>, /* GICH */ + <0x0 0xf6806000 0 0x2000>; /* GICV */ + #address-cells = <0>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + sram: sram@fff80000 { + compatible = "hisilicon,hi6220-sramctrl", "syscon"; + reg = <0x0 0xfff80000 0x0 0x12000>; + }; + + ao_ctrl: ao_ctrl@f7800000 { + compatible = "hisilicon,hi6220-aoctrl", "syscon"; + reg = <0x0 0xf7800000 0x0 0x2000>; + #clock-cells = <1>; + }; + + sys_ctrl: sys_ctrl@f7030000 { + compatible = "hisilicon,hi6220-sysctrl", "syscon"; + reg = <0x0 0xf7030000 0x0 0x2000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + media_ctrl: media_ctrl@f4410000 { + compatible = "hisilicon,hi6220-mediactrl", "syscon"; + reg = <0x0 0xf4410000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pm_ctrl: pm_ctrl@f7032000 { + compatible = "hisilicon,hi6220-pmctrl", "syscon"; + reg = <0x0 0xf7032000 0x0 0x1000>; + #clock-cells = <1>; + }; + + acpu_sctrl: acpu_sctrl@f6504000 { + compatible = "hisilicon,hi6220-acpu-sctrl", "syscon"; + reg = <0x0 0xf6504000 0x0 0x1000>; + #clock-cells = <1>; + }; + + medianoc_ade: medianoc_ade@f4520000 { + compatible = "syscon"; + reg = <0x0 0xf4520000 0x0 0x4000>; + }; + + stub_clock: stub_clock { + compatible = "hisilicon,hi6220-stub-clk"; + hisilicon,hi6220-clk-sram = <&sram>; + #clock-cells = <1>; + mbox-names = "mbox-tx"; + mboxes = <&mailbox 1 0 11>; + }; + + uart0: uart@f8015000 { /* console */ + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xf8015000 0x0 0x1000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ao_ctrl HI6220_UART0_PCLK>, + <&ao_ctrl HI6220_UART0_PCLK>; + clock-names = "uartclk", "apb_pclk"; + }; + + uart1: uart@f7111000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xf7111000 0x0 0x1000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_ctrl HI6220_UART1_PCLK>, + <&sys_ctrl HI6220_UART1_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func1 &uart1_cfg_func2>; + status = "disabled"; + }; + + uart2: uart@f7112000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xf7112000 0x0 0x1000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_ctrl HI6220_UART2_PCLK>, + <&sys_ctrl HI6220_UART2_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; + status = "disabled"; + }; + + uart3: uart@f7113000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xf7113000 0x0 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_ctrl HI6220_UART3_PCLK>, + <&sys_ctrl HI6220_UART3_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; + status = "disabled"; + }; + + uart4: uart@f7114000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xf7114000 0x0 0x1000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_ctrl HI6220_UART4_PCLK>, + <&sys_ctrl HI6220_UART4_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; + status = "disabled"; + }; + + dma0: dma@f7370000 { + compatible = "hisilicon,k3-dma-1.0"; + reg = <0x0 0xf7370000 0x0 0x1000>; + #dma-cells = <1>; + dma-channels = <15>; + dma-requests = <32>; + interrupts = <0 84 4>; + clocks = <&sys_ctrl HI6220_EDMAC_ACLK>; + dma-no-cci; + dma-type = "hi6220_dma"; + status = "ok"; + }; + + dual_timer0: timer@f8008000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x0 0xf8008000 0x0 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ao_ctrl HI6220_TIMER0_PCLK>, + <&ao_ctrl HI6220_TIMER0_PCLK>, + <&ao_ctrl HI6220_TIMER0_PCLK>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + rtc0: rtc@f8003000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x0 0xf8003000 0x0 0x1000>; + interrupts = <0 12 4>; + clocks = <&ao_ctrl HI6220_RTC0_PCLK>; + clock-names = "apb_pclk"; + }; + + rtc1: rtc@f8004000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x0 0xf8004000 0x0 0x1000>; + interrupts = <0 8 4>; + clocks = <&ao_ctrl HI6220_RTC1_PCLK>; + clock-names = "apb_pclk"; + }; + + pmx0: pinmux@f7010000 { + compatible = "pinctrl-single"; + reg = <0x0 0xf7010000 0x0 0x27c>; + #address-cells = <1>; + #size-cells = <1>; + #pinctrl-cells = <1>; + #gpio-range-cells = <3>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <7>; + pinctrl-single,gpio-range = < + &range 80 8 MUX_M0 /* gpio 3: [0..7] */ + &range 88 8 MUX_M0 /* gpio 4: [0..7] */ + &range 96 8 MUX_M0 /* gpio 5: [0..7] */ + &range 104 8 MUX_M0 /* gpio 6: [0..7] */ + &range 112 8 MUX_M0 /* gpio 7: [0..7] */ + &range 120 2 MUX_M0 /* gpio 8: [0..1] */ + &range 2 6 MUX_M1 /* gpio 8: [2..7] */ + &range 8 8 MUX_M1 /* gpio 9: [0..7] */ + &range 0 1 MUX_M1 /* gpio 10: [0] */ + &range 16 7 MUX_M1 /* gpio 10: [1..7] */ + &range 23 3 MUX_M1 /* gpio 11: [0..2] */ + &range 28 5 MUX_M1 /* gpio 11: [3..7] */ + &range 33 3 MUX_M1 /* gpio 12: [0..2] */ + &range 43 5 MUX_M1 /* gpio 12: [3..7] */ + &range 48 8 MUX_M1 /* gpio 13: [0..7] */ + &range 56 8 MUX_M1 /* gpio 14: [0..7] */ + &range 74 6 MUX_M1 /* gpio 15: [0..5] */ + &range 122 1 MUX_M1 /* gpio 15: [6] */ + &range 126 1 MUX_M1 /* gpio 15: [7] */ + &range 127 8 MUX_M1 /* gpio 16: [0..7] */ + &range 135 8 MUX_M1 /* gpio 17: [0..7] */ + &range 143 8 MUX_M1 /* gpio 18: [0..7] */ + &range 151 8 MUX_M1 /* gpio 19: [0..7] */ + >; + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + }; + + pmx1: pinmux@f7010800 { + compatible = "pinconf-single"; + reg = <0x0 0xf7010800 0x0 0x28c>; + #address-cells = <1>; + #size-cells = <1>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + }; + + pmx2: pinmux@f8001800 { + compatible = "pinconf-single"; + reg = <0x0 0xf8001800 0x0 0x78>; + #address-cells = <1>; + #size-cells = <1>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + }; + + gpio0: gpio@f8011000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf8011000 0x0 0x1000>; + interrupts = <0 52 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@f8012000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf8012000 0x0 0x1000>; + interrupts = <0 53 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@f8013000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf8013000 0x0 0x1000>; + interrupts = <0 54 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio3: gpio@f8014000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf8014000 0x0 0x1000>; + interrupts = <0 55 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 80 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio4: gpio@f7020000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7020000 0x0 0x1000>; + interrupts = <0 56 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 88 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio5: gpio@f7021000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7021000 0x0 0x1000>; + interrupts = <0 57 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 96 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio6: gpio@f7022000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7022000 0x0 0x1000>; + interrupts = <0 58 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 104 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio7: gpio@f7023000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7023000 0x0 0x1000>; + interrupts = <0 59 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 112 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio8: gpio@f7024000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7024000 0x0 0x1000>; + interrupts = <0 60 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 120 2 &pmx0 2 2 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio9: gpio@f7025000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7025000 0x0 0x1000>; + interrupts = <0 61 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 8 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio10: gpio@f7026000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7026000 0x0 0x1000>; + interrupts = <0 62 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 0 1 &pmx0 1 16 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio11: gpio@f7027000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7027000 0x0 0x1000>; + interrupts = <0 63 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 23 3 &pmx0 3 28 5>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio12: gpio@f7028000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7028000 0x0 0x1000>; + interrupts = <0 64 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 33 3 &pmx0 3 43 5>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio13: gpio@f7029000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7029000 0x0 0x1000>; + interrupts = <0 65 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 48 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio14: gpio@f702a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702a000 0x0 0x1000>; + interrupts = <0 66 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 56 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio15: gpio@f702b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702b000 0x0 0x1000>; + interrupts = <0 67 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < + &pmx0 0 74 6 + &pmx0 6 122 1 + &pmx0 7 126 1 + >; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio16: gpio@f702c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702c000 0x0 0x1000>; + interrupts = <0 68 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 127 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio17: gpio@f702d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702d000 0x0 0x1000>; + interrupts = <0 69 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 135 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio18: gpio@f702e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702e000 0x0 0x1000>; + interrupts = <0 70 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 143 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio19: gpio@f702f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702f000 0x0 0x1000>; + interrupts = <0 71 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 151 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + spi0: spi@f7106000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xf7106000 0x0 0x1000>; + interrupts = <0 50 4>; + bus-id = <0>; + enable-dma = <0>; + clocks = <&sys_ctrl HI6220_SPI_CLK>; + clock-names = "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pmx_func &spi0_cfg_func>; + num-cs = <1>; + cs-gpios = <&gpio6 2 0>; + status = "disabled"; + }; + + i2c0: i2c@f7100000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xf7100000 0x0 0x1000>; + interrupts = <0 44 4>; + clocks = <&sys_ctrl HI6220_I2C0_CLK>; + i2c-sda-hold-time-ns = <300>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; + status = "disabled"; + }; + + i2c1: i2c@f7101000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xf7101000 0x0 0x1000>; + clocks = <&sys_ctrl HI6220_I2C1_CLK>; + interrupts = <0 45 4>; + i2c-sda-hold-time-ns = <300>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>; + status = "disabled"; + }; + + i2c2: i2c@f7102000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xf7102000 0x0 0x1000>; + clocks = <&sys_ctrl HI6220_I2C2_CLK>; + interrupts = <0 46 4>; + i2c-sda-hold-time-ns = <300>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>; + status = "disabled"; + }; + + usb_phy: usbphy { + compatible = "hisilicon,hi6220-usb-phy"; + #phy-cells = <0>; + phy-supply = <®_5v_hub>; + hisilicon,peripheral-syscon = <&sys_ctrl>; + }; + + usb: usb@f72c0000 { + compatible = "hisilicon,hi6220-usb"; + reg = <0x0 0xf72c0000 0x0 0x40000>; + phys = <&usb_phy>; + phy-names = "usb2-phy"; + clocks = <&sys_ctrl HI6220_USBOTG_HCLK>; + clock-names = "otg"; + dr_mode = "otg"; + g-rx-fifo-size = <512>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 128 128 128 128 128 128 + 16 16 16 16 16 16 16>; + interrupts = <0 77 0x4>; + }; + + mailbox: mailbox@f7510000 { + compatible = "hisilicon,hi6220-mbox"; + reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */ + <0x0 0x06dff800 0x0 0x0800>; /* Mailbox buffer */ + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <3>; + }; + + dwmmc_0: dwmmc0@f723d000 { + compatible = "hisilicon,hi6220-dw-mshc"; + reg = <0x0 0xf723d000 0x0 0x1000>; + interrupts = <0x0 0x48 0x4>; + clocks = <&sys_ctrl 2>, <&sys_ctrl 1>; + clock-names = "ciu", "biu"; + resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>; + reset-names = "reset"; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pmx_func &emmc_clk_cfg_func + &emmc_cfg_func &emmc_rst_cfg_func>; + }; + + dwmmc_1: dwmmc1@f723e000 { + compatible = "hisilicon,hi6220-dw-mshc"; + hisilicon,peripheral-syscon = <&ao_ctrl>; + reg = <0x0 0xf723e000 0x0 0x1000>; + interrupts = <0x0 0x49 0x4>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clocks = <&sys_ctrl 4>, <&sys_ctrl 3>; + clock-names = "ciu", "biu"; + resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>; + reset-names = "reset"; + pinctrl-names = "default", "idle"; + pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>; + pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>; + }; + + dwmmc_2: dwmmc2@f723f000 { + compatible = "hisilicon,hi6220-dw-mshc"; + reg = <0x0 0xf723f000 0x0 0x1000>; + interrupts = <0x0 0x4a 0x4>; + clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>; + clock-names = "ciu", "biu"; + resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>; + reset-names = "reset"; + pinctrl-names = "default", "idle"; + pinctrl-0 = <&sdio_pmx_func &sdio_clk_cfg_func &sdio_cfg_func>; + pinctrl-1 = <&sdio_pmx_idle &sdio_clk_cfg_idle &sdio_cfg_idle>; + }; + + tsensor: tsensor@0,f7030700 { + compatible = "hisilicon,tsensor"; + reg = <0x0 0xf7030700 0x0 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_ctrl 22>; + clock-names = "thermal_clk"; + #thermal-sensor-cells = <1>; + }; + + i2s0: i2s@f7118000{ + compatible = "hisilicon,hi6210-i2s"; + reg = <0x0 0xf7118000 0x0 0x8000>; /* i2s unit */ + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* 155 "DigACodec_intr"-32 */ + clocks = <&sys_ctrl HI6220_DACODEC_PCLK>, + <&sys_ctrl HI6220_BBPPLL0_DIV>; + clock-names = "dacodec", "i2s-base"; + dmas = <&dma0 15 &dma0 14>; + dma-names = "rx", "tx"; + hisilicon,sysctrl-syscon = <&sys_ctrl>; + #sound-dai-cells = <1>; + }; + + thermal-zones { + + cls0: cls0 { + polling-delay = <1000>; + polling-delay-passive = <100>; + sustainable-power = <3326>; + + /* sensor ID */ + thermal-sensors = <&tsensor 2>; + + trips { + threshold: trip-point@0 { + temperature = <65000>; + hysteresis = <0>; + type = "passive"; + }; + + target: trip-point@1 { + temperature = <75000>; + hysteresis = <0>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + ade: ade@f4100000 { + compatible = "hisilicon,hi6220-ade"; + reg = <0x0 0xf4100000 0x0 0x7800>; + reg-names = "ade_base"; + hisilicon,noc-syscon = <&medianoc_ade>; + resets = <&media_ctrl MEDIA_ADE>; + interrupts = <0 115 4>; /* ldi interrupt */ + + clocks = <&media_ctrl HI6220_ADE_CORE>, + <&media_ctrl HI6220_CODEC_JPEG>, + <&media_ctrl HI6220_ADE_PIX_SRC>; + /*clock name*/ + clock-names = "clk_ade_core", + "clk_codec_jpeg", + "clk_ade_pix"; + + assigned-clocks = <&media_ctrl HI6220_ADE_CORE>, + <&media_ctrl HI6220_CODEC_JPEG>; + assigned-clock-rates = <360000000>, <288000000>; + dma-coherent; + status = "disabled"; + + port { + ade_out: endpoint { + remote-endpoint = <&dsi_in>; + }; + }; + }; + + dsi: dsi@f4107800 { + compatible = "hisilicon,hi6220-dsi"; + reg = <0x0 0xf4107800 0x0 0x100>; + clocks = <&media_ctrl HI6220_DSI_PCLK>; + clock-names = "pclk"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* 0 for input port */ + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <&ade_out>; + }; + }; + }; + }; + + debug@f6590000 { + compatible = "arm,coresight-cpu-debug","arm,primecell"; + reg = <0 0xf6590000 0 0x1000>; + clocks = <&sys_ctrl HI6220_DAPB_CLK>; + clock-names = "apb_pclk"; + cpu = <&cpu0>; + }; + + debug@f6592000 { + compatible = "arm,coresight-cpu-debug","arm,primecell"; + reg = <0 0xf6592000 0 0x1000>; + clocks = <&sys_ctrl HI6220_DAPB_CLK>; + clock-names = "apb_pclk"; + cpu = <&cpu1>; + }; + + debug@f6594000 { + compatible = "arm,coresight-cpu-debug","arm,primecell"; + reg = <0 0xf6594000 0 0x1000>; + clocks = <&sys_ctrl HI6220_DAPB_CLK>; + clock-names = "apb_pclk"; + cpu = <&cpu2>; + }; + + debug@f6596000 { + compatible = "arm,coresight-cpu-debug","arm,primecell"; + reg = <0 0xf6596000 0 0x1000>; + clocks = <&sys_ctrl HI6220_DAPB_CLK>; + clock-names = "apb_pclk"; + cpu = <&cpu3>; + }; + + debug@f65d0000 { + compatible = "arm,coresight-cpu-debug","arm,primecell"; + reg = <0 0xf65d0000 0 0x1000>; + clocks = <&sys_ctrl HI6220_DAPB_CLK>; + clock-names = "apb_pclk"; + cpu = <&cpu4>; + }; + + debug@f65d2000 { + compatible = "arm,coresight-cpu-debug","arm,primecell"; + reg = <0 0xf65d2000 0 0x1000>; + clocks = <&sys_ctrl HI6220_DAPB_CLK>; + clock-names = "apb_pclk"; + cpu = <&cpu5>; + }; + + debug@f65d4000 { + compatible = "arm,coresight-cpu-debug","arm,primecell"; + reg = <0 0xf65d4000 0 0x1000>; + clocks = <&sys_ctrl HI6220_DAPB_CLK>; + clock-names = "apb_pclk"; + cpu = <&cpu6>; + }; + + debug@f65d6000 { + compatible = "arm,coresight-cpu-debug","arm,primecell"; + reg = <0 0xf65d6000 0 0x1000>; + clocks = <&sys_ctrl HI6220_DAPB_CLK>; + clock-names = "apb_pclk"; + cpu = <&cpu7>; + }; + }; +}; + +#include "hi6220-coresight.dtsi" diff --git a/Platforms/Hisilicon/DeviceTree/hikey-pinctrl.dtsi b/Platforms/Hisilicon/DeviceTree/hikey-pinctrl.dtsi new file mode 100644 index 0000000..e7d2261 --- /dev/null +++ b/Platforms/Hisilicon/DeviceTree/hikey-pinctrl.dtsi @@ -0,0 +1,706 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * pinctrl dts fils for Hislicon HiKey development board + * + */ +#include <dt-bindings/pinctrl/hisi.h> + +/ { + soc { + pmx0: pinmux@f7010000 { + pinctrl-names = "default"; + pinctrl-0 = < + &boot_sel_pmx_func + &hkadc_ssi_pmx_func + &codec_clk_pmx_func + &pwm_in_pmx_func + &bl_pwm_pmx_func + >; + + boot_sel_pmx_func: boot_sel_pmx_func { + pinctrl-single,pins = < + 0x0 MUX_M0 /* BOOT_SEL (IOMG000) */ + >; + }; + + emmc_pmx_func: emmc_pmx_func { + pinctrl-single,pins = < + 0x100 MUX_M0 /* EMMC_CLK (IOMG064) */ + 0x104 MUX_M0 /* EMMC_CMD (IOMG065) */ + 0x108 MUX_M0 /* EMMC_DATA0 (IOMG066) */ + 0x10c MUX_M0 /* EMMC_DATA1 (IOMG067) */ + 0x110 MUX_M0 /* EMMC_DATA2 (IOMG068) */ + 0x114 MUX_M0 /* EMMC_DATA3 (IOMG069) */ + 0x118 MUX_M0 /* EMMC_DATA4 (IOMG070) */ + 0x11c MUX_M0 /* EMMC_DATA5 (IOMG071) */ + 0x120 MUX_M0 /* EMMC_DATA6 (IOMG072) */ + 0x124 MUX_M0 /* EMMC_DATA7 (IOMG073) */ + >; + }; + + sd_pmx_func: sd_pmx_func { + pinctrl-single,pins = < + 0xc MUX_M0 /* SD_CLK (IOMG003) */ + 0x10 MUX_M0 /* SD_CMD (IOMG004) */ + 0x14 MUX_M0 /* SD_DATA0 (IOMG005) */ + 0x18 MUX_M0 /* SD_DATA1 (IOMG006) */ + 0x1c MUX_M0 /* SD_DATA2 (IOMG007) */ + 0x20 MUX_M0 /* SD_DATA3 (IOMG008) */ + >; + }; + sd_pmx_idle: sd_pmx_idle { + pinctrl-single,pins = < + 0xc MUX_M1 /* SD_CLK (IOMG003) */ + 0x10 MUX_M1 /* SD_CMD (IOMG004) */ + 0x14 MUX_M1 /* SD_DATA0 (IOMG005) */ + 0x18 MUX_M1 /* SD_DATA1 (IOMG006) */ + 0x1c MUX_M1 /* SD_DATA2 (IOMG007) */ + 0x20 MUX_M1 /* SD_DATA3 (IOMG008) */ + >; + }; + + sdio_pmx_func: sdio_pmx_func { + pinctrl-single,pins = < + 0x128 MUX_M0 /* SDIO_CLK (IOMG074) */ + 0x12c MUX_M0 /* SDIO_CMD (IOMG075) */ + 0x130 MUX_M0 /* SDIO_DATA0 (IOMG076) */ + 0x134 MUX_M0 /* SDIO_DATA1 (IOMG077) */ + 0x138 MUX_M0 /* SDIO_DATA2 (IOMG078) */ + 0x13c MUX_M0 /* SDIO_DATA3 (IOMG079) */ + >; + }; + sdio_pmx_idle: sdio_pmx_idle { + pinctrl-single,pins = < + 0x128 MUX_M1 /* SDIO_CLK (IOMG074) */ + 0x12c MUX_M1 /* SDIO_CMD (IOMG075) */ + 0x130 MUX_M1 /* SDIO_DATA0 (IOMG076) */ + 0x134 MUX_M1 /* SDIO_DATA1 (IOMG077) */ + 0x138 MUX_M1 /* SDIO_DATA2 (IOMG078) */ + 0x13c MUX_M1 /* SDIO_DATA3 (IOMG079) */ + >; + }; + + isp_pmx_func: isp_pmx_func { + pinctrl-single,pins = < + 0x24 MUX_M0 /* ISP_PWDN0 (IOMG009) */ + 0x28 MUX_M0 /* ISP_PWDN1 (IOMG010) */ + 0x2c MUX_M0 /* ISP_PWDN2 (IOMG011) */ + 0x30 MUX_M1 /* ISP_SHUTTER0 (IOMG012) */ + 0x34 MUX_M1 /* ISP_SHUTTER1 (IOMG013) */ + 0x38 MUX_M1 /* ISP_PWM (IOMG014) */ + 0x3c MUX_M0 /* ISP_CCLK0 (IOMG015) */ + 0x40 MUX_M0 /* ISP_CCLK1 (IOMG016) */ + 0x44 MUX_M0 /* ISP_RESETB0 (IOMG017) */ + 0x48 MUX_M0 /* ISP_RESETB1 (IOMG018) */ + 0x4c MUX_M1 /* ISP_STROBE0 (IOMG019) */ + 0x50 MUX_M1 /* ISP_STROBE1 (IOMG020) */ + 0x54 MUX_M0 /* ISP_SDA0 (IOMG021) */ + 0x58 MUX_M0 /* ISP_SCL0 (IOMG022) */ + 0x5c MUX_M0 /* ISP_SDA1 (IOMG023) */ + 0x60 MUX_M0 /* ISP_SCL1 (IOMG024) */ + >; + }; + + hkadc_ssi_pmx_func: hkadc_ssi_pmx_func { + pinctrl-single,pins = < + 0x68 MUX_M0 /* HKADC_SSI (IOMG026) */ + >; + }; + + codec_clk_pmx_func: codec_clk_pmx_func { + pinctrl-single,pins = < + 0x6c MUX_M0 /* CODEC_CLK (IOMG027) */ + >; + }; + + codec_pmx_func: codec_pmx_func { + pinctrl-single,pins = < + 0x70 MUX_M1 /* DMIC_CLK (IOMG028) */ + 0x74 MUX_M0 /* CODEC_SYNC (IOMG029) */ + 0x78 MUX_M0 /* CODEC_DI (IOMG030) */ + 0x7c MUX_M0 /* CODEC_DO (IOMG031) */ + >; + }; + + fm_pmx_func: fm_pmx_func { + pinctrl-single,pins = < + 0x80 MUX_M1 /* FM_XCLK (IOMG032) */ + 0x84 MUX_M1 /* FM_XFS (IOMG033) */ + 0x88 MUX_M1 /* FM_DI (IOMG034) */ + 0x8c MUX_M1 /* FM_DO (IOMG035) */ + >; + }; + + bt_pmx_func: bt_pmx_func { + pinctrl-single,pins = < + 0x90 MUX_M0 /* BT_XCLK (IOMG036) */ + 0x94 MUX_M0 /* BT_XFS (IOMG037) */ + 0x98 MUX_M0 /* BT_DI (IOMG038) */ + 0x9c MUX_M0 /* BT_DO (IOMG039) */ + >; + }; + + pwm_in_pmx_func: pwm_in_pmx_func { + pinctrl-single,pins = < + 0xb8 MUX_M1 /* PWM_IN (IOMG046) */ + >; + }; + + bl_pwm_pmx_func: bl_pwm_pmx_func { + pinctrl-single,pins = < + 0xbc MUX_M1 /* BL_PWM (IOMG047) */ + >; + }; + + uart0_pmx_func: uart0_pmx_func { + pinctrl-single,pins = < + 0xc0 MUX_M0 /* UART0_RXD (IOMG048) */ + 0xc4 MUX_M0 /* UART0_TXD (IOMG049) */ + >; + }; + + uart1_pmx_func: uart1_pmx_func { + pinctrl-single,pins = < + 0xc8 MUX_M0 /* UART1_CTS_N (IOMG050) */ + 0xcc MUX_M0 /* UART1_RTS_N (IOMG051) */ + 0xd0 MUX_M0 /* UART1_RXD (IOMG052) */ + 0xd4 MUX_M0 /* UART1_TXD (IOMG053) */ + >; + }; + + uart2_pmx_func: uart2_pmx_func { + pinctrl-single,pins = < + 0xd8 MUX_M0 /* UART2_CTS_N (IOMG054) */ + 0xdc MUX_M0 /* UART2_RTS_N (IOMG055) */ + 0xe0 MUX_M0 /* UART2_RXD (IOMG056) */ + 0xe4 MUX_M0 /* UART2_TXD (IOMG057) */ + >; + }; + + uart3_pmx_func: uart3_pmx_func { + pinctrl-single,pins = < + 0x180 MUX_M1 /* UART3_CTS_N (IOMG096) */ + 0x184 MUX_M1 /* UART3_RTS_N (IOMG097) */ + 0x188 MUX_M1 /* UART3_RXD (IOMG098) */ + 0x18c MUX_M1 /* UART3_TXD (IOMG099) */ + >; + }; + + uart4_pmx_func: uart4_pmx_func { + pinctrl-single,pins = < + 0x1d0 MUX_M1 /* UART4_CTS_N (IOMG116) */ + 0x1d4 MUX_M1 /* UART4_RTS_N (IOMG117) */ + 0x1d8 MUX_M1 /* UART4_RXD (IOMG118) */ + 0x1dc MUX_M1 /* UART4_TXD (IOMG119) */ + >; + }; + + uart5_pmx_func: uart5_pmx_func { + pinctrl-single,pins = < + 0x1c8 MUX_M1 /* UART5_RXD (IOMG114) */ + 0x1cc MUX_M1 /* UART5_TXD (IOMG115) */ + >; + }; + + i2c0_pmx_func: i2c0_pmx_func { + pinctrl-single,pins = < + 0xe8 MUX_M0 /* I2C0_SCL (IOMG058) */ + 0xec MUX_M0 /* I2C0_SDA (IOMG059) */ + >; + }; + + i2c1_pmx_func: i2c1_pmx_func { + pinctrl-single,pins = < + 0xf0 MUX_M0 /* I2C1_SCL (IOMG060) */ + 0xf4 MUX_M0 /* I2C1_SDA (IOMG061) */ + >; + }; + + i2c2_pmx_func: i2c2_pmx_func { + pinctrl-single,pins = < + 0xf8 MUX_M0 /* I2C2_SCL (IOMG062) */ + 0xfc MUX_M0 /* I2C2_SDA (IOMG063) */ + >; + }; + + spi0_pmx_func: spi0_pmx_func { + pinctrl-single,pins = < + 0x1a0 MUX_M1 /* SPI0_DI (IOMG104) */ + 0x1a4 MUX_M1 /* SPI0_DO (IOMG105) */ + 0x1a8 MUX_M1 /* SPI0_CS_N (IOMG106) */ + 0x1ac MUX_M1 /* SPI0_CLK (IOMG107) */ + >; + }; + }; + + pmx1: pinmux@f7010800 { + + pinctrl-names = "default"; + pinctrl-0 = < + &boot_sel_cfg_func + &hkadc_ssi_cfg_func + &codec_clk_cfg_func + &pwm_in_cfg_func + &bl_pwm_cfg_func + >; + + boot_sel_cfg_func: boot_sel_cfg_func { + pinctrl-single,pins = < + 0x0 0x0 /* BOOT_SEL (IOCFG000) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + hkadc_ssi_cfg_func: hkadc_ssi_cfg_func { + pinctrl-single,pins = < + 0x6c 0x0 /* HKADC_SSI (IOCFG027) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + emmc_clk_cfg_func: emmc_clk_cfg_func { + pinctrl-single,pins = < + 0x104 0x0 /* EMMC_CLK (IOCFG065) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>; + }; + + emmc_cfg_func: emmc_cfg_func { + pinctrl-single,pins = < + 0x108 0x0 /* EMMC_CMD (IOCFG066) */ + 0x10c 0x0 /* EMMC_DATA0 (IOCFG067) */ + 0x110 0x0 /* EMMC_DATA1 (IOCFG068) */ + 0x114 0x0 /* EMMC_DATA2 (IOCFG069) */ + 0x118 0x0 /* EMMC_DATA3 (IOCFG070) */ + 0x11c 0x0 /* EMMC_DATA4 (IOCFG071) */ + 0x120 0x0 /* EMMC_DATA5 (IOCFG072) */ + 0x124 0x0 /* EMMC_DATA6 (IOCFG073) */ + 0x128 0x0 /* EMMC_DATA7 (IOCFG074) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; + }; + + emmc_rst_cfg_func: emmc_rst_cfg_func { + pinctrl-single,pins = < + 0x12c 0x0 /* EMMC_RST_N (IOCFG075) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; + }; + + sd_clk_cfg_func: sd_clk_cfg_func { + pinctrl-single,pins = < + 0xc 0x0 /* SD_CLK (IOCFG003) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_10MA DRIVE_MASK>; + }; + sd_clk_cfg_idle: sd_clk_cfg_idle { + pinctrl-single,pins = < + 0xc 0x0 /* SD_CLK (IOCFG003) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + sd_cfg_func: sd_cfg_func { + pinctrl-single,pins = < + 0x10 0x0 /* SD_CMD (IOCFG004) */ + 0x14 0x0 /* SD_DATA0 (IOCFG005) */ + 0x18 0x0 /* SD_DATA1 (IOCFG006) */ + 0x1c 0x0 /* SD_DATA2 (IOCFG007) */ + 0x20 0x0 /* SD_DATA3 (IOCFG008) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>; + }; + sd_cfg_idle: sd_cfg_idle { + pinctrl-single,pins = < + 0x10 0x0 /* SD_CMD (IOCFG004) */ + 0x14 0x0 /* SD_DATA0 (IOCFG005) */ + 0x18 0x0 /* SD_DATA1 (IOCFG006) */ + 0x1c 0x0 /* SD_DATA2 (IOCFG007) */ + 0x20 0x0 /* SD_DATA3 (IOCFG008) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + sdio_clk_cfg_func: sdio_clk_cfg_func { + pinctrl-single,pins = < + 0x134 0x0 /* SDIO_CLK (IOCFG077) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>; + }; + sdio_clk_cfg_idle: sdio_clk_cfg_idle { + pinctrl-single,pins = < + 0x134 0x0 /* SDIO_CLK (IOCFG077) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + sdio_cfg_func: sdio_cfg_func { + pinctrl-single,pins = < + 0x138 0x0 /* SDIO_CMD (IOCFG078) */ + 0x13c 0x0 /* SDIO_DATA0 (IOCFG079) */ + 0x140 0x0 /* SDIO_DATA1 (IOCFG080) */ + 0x144 0x0 /* SDIO_DATA2 (IOCFG081) */ + 0x148 0x0 /* SDIO_DATA3 (IOCFG082) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; + }; + sdio_cfg_idle: sdio_cfg_idle { + pinctrl-single,pins = < + 0x138 0x0 /* SDIO_CMD (IOCFG078) */ + 0x13c 0x0 /* SDIO_DATA0 (IOCFG079) */ + 0x140 0x0 /* SDIO_DATA1 (IOCFG080) */ + 0x144 0x0 /* SDIO_DATA2 (IOCFG081) */ + 0x148 0x0 /* SDIO_DATA3 (IOCFG082) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + isp_cfg_func1: isp_cfg_func1 { + pinctrl-single,pins = < + 0x28 0x0 /* ISP_PWDN0 (IOCFG010) */ + 0x2c 0x0 /* ISP_PWDN1 (IOCFG011) */ + 0x30 0x0 /* ISP_PWDN2 (IOCFG012) */ + 0x34 0x0 /* ISP_SHUTTER0 (IOCFG013) */ + 0x38 0x0 /* ISP_SHUTTER1 (IOCFG014) */ + 0x3c 0x0 /* ISP_PWM (IOCFG015) */ + 0x40 0x0 /* ISP_CCLK0 (IOCFG016) */ + 0x44 0x0 /* ISP_CCLK1 (IOCFG017) */ + 0x48 0x0 /* ISP_RESETB0 (IOCFG018) */ + 0x4c 0x0 /* ISP_RESETB1 (IOCFG019) */ + 0x50 0x0 /* ISP_STROBE0 (IOCFG020) */ + 0x58 0x0 /* ISP_SDA0 (IOCFG022) */ + 0x5c 0x0 /* ISP_SCL0 (IOCFG023) */ + 0x60 0x0 /* ISP_SDA1 (IOCFG024) */ + 0x64 0x0 /* ISP_SCL1 (IOCFG025) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + isp_cfg_idle1: isp_cfg_idle1 { + pinctrl-single,pins = < + 0x34 0x0 /* ISP_SHUTTER0 (IOCFG013) */ + 0x38 0x0 /* ISP_SHUTTER1 (IOCFG014) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + isp_cfg_func2: isp_cfg_func2 { + pinctrl-single,pins = < + 0x54 0x0 /* ISP_STROBE1 (IOCFG021) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + codec_clk_cfg_func: codec_clk_cfg_func { + pinctrl-single,pins = < + 0x70 0x0 /* CODEC_CLK (IOCFG028) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; + }; + codec_clk_cfg_idle: codec_clk_cfg_idle { + pinctrl-single,pins = < + 0x70 0x0 /* CODEC_CLK (IOCFG028) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + codec_cfg_func1: codec_cfg_func1 { + pinctrl-single,pins = < + 0x74 0x0 /* DMIC_CLK (IOCFG029) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + codec_cfg_func2: codec_cfg_func2 { + pinctrl-single,pins = < + 0x78 0x0 /* CODEC_SYNC (IOCFG030) */ + 0x7c 0x0 /* CODEC_DI (IOCFG031) */ + 0x80 0x0 /* CODEC_DO (IOCFG032) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; + }; + codec_cfg_idle2: codec_cfg_idle2 { + pinctrl-single,pins = < + 0x78 0x0 /* CODEC_SYNC (IOCFG030) */ + 0x7c 0x0 /* CODEC_DI (IOCFG031) */ + 0x80 0x0 /* CODEC_DO (IOCFG032) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + fm_cfg_func: fm_cfg_func { + pinctrl-single,pins = < + 0x84 0x0 /* FM_XCLK (IOCFG033) */ + 0x88 0x0 /* FM_XFS (IOCFG034) */ + 0x8c 0x0 /* FM_DI (IOCFG035) */ + 0x90 0x0 /* FM_DO (IOCFG036) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + bt_cfg_func: bt_cfg_func { + pinctrl-single,pins = < + 0x94 0x0 /* BT_XCLK (IOCFG037) */ + 0x98 0x0 /* BT_XFS (IOCFG038) */ + 0x9c 0x0 /* BT_DI (IOCFG039) */ + 0xa0 0x0 /* BT_DO (IOCFG040) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + bt_cfg_idle: bt_cfg_idle { + pinctrl-single,pins = < + 0x94 0x0 /* BT_XCLK (IOCFG037) */ + 0x98 0x0 /* BT_XFS (IOCFG038) */ + 0x9c 0x0 /* BT_DI (IOCFG039) */ + 0xa0 0x0 /* BT_DO (IOCFG040) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + pwm_in_cfg_func: pwm_in_cfg_func { + pinctrl-single,pins = < + 0xbc 0x0 /* PWM_IN (IOCFG047) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + bl_pwm_cfg_func: bl_pwm_cfg_func { + pinctrl-single,pins = < + 0xc0 0x0 /* BL_PWM (IOCFG048) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + uart0_cfg_func1: uart0_cfg_func1 { + pinctrl-single,pins = < + 0xc4 0x0 /* UART0_RXD (IOCFG049) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + uart0_cfg_func2: uart0_cfg_func2 { + pinctrl-single,pins = < + 0xc8 0x0 /* UART0_TXD (IOCFG050) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>; + }; + + uart1_cfg_func1: uart1_cfg_func1 { + pinctrl-single,pins = < + 0xcc 0x0 /* UART1_CTS_N (IOCFG051) */ + 0xd4 0x0 /* UART1_RXD (IOCFG053) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_UP PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + uart1_cfg_func2: uart1_cfg_func2 { + pinctrl-single,pins = < + 0xd0 0x0 /* UART1_RTS_N (IOCFG052) */ + 0xd8 0x0 /* UART1_TXD (IOCFG054) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + uart2_cfg_func: uart2_cfg_func { + pinctrl-single,pins = < + 0xdc 0x0 /* UART2_CTS_N (IOCFG055) */ + 0xe0 0x0 /* UART2_RTS_N (IOCFG056) */ + 0xe4 0x0 /* UART2_RXD (IOCFG057) */ + 0xe8 0x0 /* UART2_TXD (IOCFG058) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + uart3_cfg_func: uart3_cfg_func { + pinctrl-single,pins = < + 0x190 0x0 /* UART3_CTS_N (IOCFG100) */ + 0x194 0x0 /* UART3_RTS_N (IOCFG101) */ + 0x198 0x0 /* UART3_RXD (IOCFG102) */ + 0x19c 0x0 /* UART3_TXD (IOCFG103) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + uart4_cfg_func: uart4_cfg_func { + pinctrl-single,pins = < + 0x1e0 0x0 /* UART4_CTS_N (IOCFG120) */ + 0x1e4 0x0 /* UART4_RTS_N (IOCFG121) */ + 0x1e8 0x0 /* UART4_RXD (IOCFG122) */ + 0x1ec 0x0 /* UART4_TXD (IOCFG123) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + uart5_cfg_func: uart5_cfg_func { + pinctrl-single,pins = < + 0x1d8 0x0 /* UART4_RXD (IOCFG118) */ + 0x1dc 0x0 /* UART4_TXD (IOCFG119) */ + >; + pinctrl-single,bias-pulldown = <PULL_DOWN PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + i2c0_cfg_func: i2c0_cfg_func { + pinctrl-single,pins = < + 0xec 0x0 /* I2C0_SCL (IOCFG059) */ + 0xf0 0x0 /* I2C0_SDA (IOCFG060) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + i2c1_cfg_func: i2c1_cfg_func { + pinctrl-single,pins = < + 0xf4 0x0 /* I2C1_SCL (IOCFG061) */ + 0xf8 0x0 /* I2C1_SDA (IOCFG062) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + i2c2_cfg_func: i2c2_cfg_func { + pinctrl-single,pins = < + 0xfc 0x0 /* I2C2_SCL (IOCFG063) */ + 0x100 0x0 /* I2C2_SDA (IOCFG064) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + spi0_cfg_func: spi0_cfg_func { + pinctrl-single,pins = < + 0x1b0 0x0 /* SPI0_DI (IOCFG108) */ + 0x1b4 0x0 /* SPI0_DO (IOCFG109) */ + 0x1b8 0x0 /* SPI0_CS_N (IOCFG110) */ + 0x1bc 0x0 /* SPI0_CLK (IOCFG111) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + }; + + pmx2: pinmux@f8001800 { + + pinctrl-names = "default"; + pinctrl-0 = < + &rstout_n_cfg_func + >; + + rstout_n_cfg_func: rstout_n_cfg_func { + pinctrl-single,pins = < + 0x0 0x0 /* RSTOUT_N (IOCFG000) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + pmu_peri_en_cfg_func: pmu_peri_en_cfg_func { + pinctrl-single,pins = < + 0x4 0x0 /* PMU_PERI_EN (IOCFG001) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + sysclk0_en_cfg_func: sysclk0_en_cfg_func { + pinctrl-single,pins = < + 0x8 0x0 /* SYSCLK0_EN (IOCFG002) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + + jtag_tdo_cfg_func: jtag_tdo_cfg_func { + pinctrl-single,pins = < + 0xc 0x0 /* JTAG_TDO (IOCFG003) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>; + }; + + rf_reset_cfg_func: rf_reset_cfg_func { + pinctrl-single,pins = < + 0x70 0x0 /* RF_RESET0 (IOCFG028) */ + 0x74 0x0 /* RF_RESET1 (IOCFG029) */ + >; + pinctrl-single,bias-pulldown = <PULL_DIS PULL_DOWN PULL_DIS PULL_DOWN>; + pinctrl-single,bias-pullup = <PULL_DIS PULL_UP PULL_DIS PULL_UP>; + pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>; + }; + }; + }; +}; diff --git a/Platforms/Hisilicon/DeviceTree/hikey960-pinctrl.dtsi b/Platforms/Hisilicon/DeviceTree/hikey960-pinctrl.dtsi new file mode 100644 index 0000000..d11efc8 --- /dev/null +++ b/Platforms/Hisilicon/DeviceTree/hikey960-pinctrl.dtsi @@ -0,0 +1,1060 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * pinctrl dts fils for Hislicon HiKey960 development board + * + */ + +#include <dt-bindings/pinctrl/hisi.h> + +/ { + soc { + /* [IOMG_000, IOMG_123] */ + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + + pmx0: pinmux@e896c000 { + compatible = "pinctrl-single"; + reg = <0x0 0xe896c000 0x0 0x1f0>; + #pinctrl-cells = <1>; + #gpio-range-cells = <0x3>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = < + &range 0 7 0 + &range 8 116 0>; + + pmu_pmx_func: pmu_pmx_func { + pinctrl-single,pins = < + 0x008 MUX_M1 /* PMU1_SSI */ + 0x00c MUX_M1 /* PMU2_SSI */ + 0x010 MUX_M1 /* PMU_CLKOUT */ + 0x100 MUX_M1 /* PMU_HKADC_SSI */ + >; + }; + + csi0_pwd_n_pmx_func: csi0_pwd_n_pmx_func { + pinctrl-single,pins = < + 0x044 MUX_M0 /* CSI0_PWD_N */ + >; + }; + + csi1_pwd_n_pmx_func: csi1_pwd_n_pmx_func { + pinctrl-single,pins = < + 0x04c MUX_M0 /* CSI1_PWD_N */ + >; + }; + + isp0_pmx_func: isp0_pmx_func { + pinctrl-single,pins = < + 0x058 MUX_M1 /* ISP_CLK0 */ + 0x064 MUX_M1 /* ISP_SCL0 */ + 0x068 MUX_M1 /* ISP_SDA0 */ + >; + }; + + isp1_pmx_func: isp1_pmx_func { + pinctrl-single,pins = < + 0x05c MUX_M1 /* ISP_CLK1 */ + 0x06c MUX_M1 /* ISP_SCL1 */ + 0x070 MUX_M1 /* ISP_SDA1 */ + >; + }; + + pwr_key_pmx_func: pwr_key_pmx_func { + pinctrl-single,pins = < + 0x080 MUX_M0 /* GPIO_034 */ + >; + }; + + i2c3_pmx_func: i2c3_pmx_func { + pinctrl-single,pins = < + 0x02c MUX_M1 /* I2C3_SCL */ + 0x030 MUX_M1 /* I2C3_SDA */ + >; + }; + + i2c4_pmx_func: i2c4_pmx_func { + pinctrl-single,pins = < + 0x090 MUX_M1 /* I2C4_SCL */ + 0x094 MUX_M1 /* I2C4_SDA */ + >; + }; + + pcie_perstn_pmx_func: pcie_perstn_pmx_func { + pinctrl-single,pins = < + 0x15c MUX_M1 /* PCIE_PERST_N */ + >; + }; + + usbhub5734_pmx_func: usbhub5734_pmx_func { + pinctrl-single,pins = < + 0x11c MUX_M0 /* GPIO_073 */ + 0x120 MUX_M0 /* GPIO_074 */ + >; + }; + + uart0_pmx_func: uart0_pmx_func { + pinctrl-single,pins = < + 0x0cc MUX_M2 /* UART0_RXD */ + 0x0d0 MUX_M2 /* UART0_TXD */ + >; + }; + + uart1_pmx_func: uart1_pmx_func { + pinctrl-single,pins = < + 0x0b0 MUX_M2 /* UART1_CTS_N */ + 0x0b4 MUX_M2 /* UART1_RTS_N */ + 0x0a8 MUX_M2 /* UART1_RXD */ + 0x0ac MUX_M2 /* UART1_TXD */ + >; + }; + + uart2_pmx_func: uart2_pmx_func { + pinctrl-single,pins = < + 0x0bc MUX_M2 /* UART2_CTS_N */ + 0x0c0 MUX_M2 /* UART2_RTS_N */ + 0x0c8 MUX_M2 /* UART2_RXD */ + 0x0c4 MUX_M2 /* UART2_TXD */ + >; + }; + + uart3_pmx_func: uart3_pmx_func { + pinctrl-single,pins = < + 0x0dc MUX_M1 /* UART3_CTS_N */ + 0x0e0 MUX_M1 /* UART3_RTS_N */ + 0x0e4 MUX_M1 /* UART3_RXD */ + 0x0e8 MUX_M1 /* UART3_TXD */ + >; + }; + + uart4_pmx_func: uart4_pmx_func { + pinctrl-single,pins = < + 0x0ec MUX_M1 /* UART4_CTS_N */ + 0x0f0 MUX_M1 /* UART4_RTS_N */ + 0x0f4 MUX_M1 /* UART4_RXD */ + 0x0f8 MUX_M1 /* UART4_TXD */ + >; + }; + + uart5_pmx_func: uart5_pmx_func { + pinctrl-single,pins = < + 0x0c4 MUX_M3 /* UART5_CTS_N */ + 0x0c8 MUX_M3 /* UART5_RTS_N */ + 0x0bc MUX_M3 /* UART5_RXD */ + 0x0c0 MUX_M3 /* UART5_TXD */ + >; + }; + + uart6_pmx_func: uart6_pmx_func { + pinctrl-single,pins = < + 0x0cc MUX_M1 /* UART6_CTS_N */ + 0x0d0 MUX_M1 /* UART6_RTS_N */ + 0x0d4 MUX_M1 /* UART6_RXD */ + 0x0d8 MUX_M1 /* UART6_TXD */ + >; + }; + + cam0_rst_pmx_func: cam0_rst_pmx_func { + pinctrl-single,pins = < + 0x0c8 MUX_M0 /* CAM0_RST */ + >; + }; + + cam1_rst_pmx_func: cam1_rst_pmx_func { + pinctrl-single,pins = < + 0x124 MUX_M0 /* CAM1_RST */ + >; + }; + }; + + /* [IOMG_MMC0_000, IOMG_MMC0_005] */ + pmx1: pinmux@ff37e000 { + compatible = "pinctrl-single"; + reg = <0x0 0xff37e000 0x0 0x18>; + #gpio-range-cells = <0x3>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 6 0>; + + sd_pmx_func: sd_pmx_func { + pinctrl-single,pins = < + 0x000 MUX_M1 /* SD_CLK */ + 0x004 MUX_M1 /* SD_CMD */ + 0x008 MUX_M1 /* SD_DATA0 */ + 0x00c MUX_M1 /* SD_DATA1 */ + 0x010 MUX_M1 /* SD_DATA2 */ + 0x014 MUX_M1 /* SD_DATA3 */ + >; + }; + }; + + /* [IOMG_FIX_000, IOMG_FIX_011] */ + pmx2: pinmux@ff3b6000 { + compatible = "pinctrl-single"; + reg = <0x0 0xff3b6000 0x0 0x30>; + #pinctrl-cells = <1>; + #gpio-range-cells = <0x3>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 12 0>; + + ufs_pmx_func: ufs_pmx_func { + pinctrl-single,pins = < + 0x000 MUX_M1 /* UFS_REF_CLK */ + 0x004 MUX_M1 /* UFS_RST_N */ + >; + }; + + spi3_pmx_func: spi3_pmx_func { + pinctrl-single,pins = < + 0x008 MUX_M1 /* SPI3_CLK */ + 0x00c MUX_M1 /* SPI3_DI */ + 0x010 MUX_M1 /* SPI3_DO */ + 0x014 MUX_M1 /* SPI3_CS0_N */ + >; + }; + }; + + /* [IOMG_MMC1_000, IOMG_MMC1_005] */ + pmx3: pinmux@ff3fd000 { + compatible = "pinctrl-single"; + reg = <0x0 0xff3fd000 0x0 0x18>; + #pinctrl-cells = <1>; + #gpio-range-cells = <0x3>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 6 0>; + + sdio_pmx_func: sdio_pmx_func { + pinctrl-single,pins = < + 0x000 MUX_M1 /* SDIO_CLK */ + 0x004 MUX_M1 /* SDIO_CMD */ + 0x008 MUX_M1 /* SDIO_DATA0 */ + 0x00c MUX_M1 /* SDIO_DATA1 */ + 0x010 MUX_M1 /* SDIO_DATA2 */ + 0x014 MUX_M1 /* SDIO_DATA3 */ + >; + }; + }; + + /* [IOMG_AO_000, IOMG_AO_041] */ + pmx4: pinmux@fff11000 { + compatible = "pinctrl-single"; + reg = <0x0 0xfff11000 0x0 0xa8>; + #pinctrl-cells = <1>; + #gpio-range-cells = <0x3>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base in node, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 42 0>; + + i2s2_pmx_func: i2s2_pmx_func { + pinctrl-single,pins = < + 0x044 MUX_M1 /* I2S2_DI */ + 0x048 MUX_M1 /* I2S2_DO */ + 0x04c MUX_M1 /* I2S2_XCLK */ + 0x050 MUX_M1 /* I2S2_XFS */ + >; + }; + + slimbus_pmx_func: slimbus_pmx_func { + pinctrl-single,pins = < + 0x02c MUX_M1 /* SLIMBUS_CLK */ + 0x030 MUX_M1 /* SLIMBUS_DATA */ + >; + }; + + i2c0_pmx_func: i2c0_pmx_func { + pinctrl-single,pins = < + 0x014 MUX_M1 /* I2C0_SCL */ + 0x018 MUX_M1 /* I2C0_SDA */ + >; + }; + + i2c1_pmx_func: i2c1_pmx_func { + pinctrl-single,pins = < + 0x01c MUX_M1 /* I2C1_SCL */ + 0x020 MUX_M1 /* I2C1_SDA */ + >; + }; + + i2c7_pmx_func: i2c7_pmx_func { + pinctrl-single,pins = < + 0x024 MUX_M3 /* I2C7_SCL */ + 0x028 MUX_M3 /* I2C7_SDA */ + >; + }; + + pcie_pmx_func: pcie_pmx_func { + pinctrl-single,pins = < + 0x084 MUX_M1 /* PCIE_CLKREQ_N */ + 0x088 MUX_M1 /* PCIE_WAKE_N */ + >; + }; + + spi2_pmx_func: spi2_pmx_func { + pinctrl-single,pins = < + 0x08c MUX_M1 /* SPI2_CLK */ + 0x090 MUX_M1 /* SPI2_DI */ + 0x094 MUX_M1 /* SPI2_DO */ + 0x098 MUX_M1 /* SPI2_CS0_N */ + >; + }; + + i2s0_pmx_func: i2s0_pmx_func { + pinctrl-single,pins = < + 0x034 MUX_M1 /* I2S0_DI */ + 0x038 MUX_M1 /* I2S0_DO */ + 0x03c MUX_M1 /* I2S0_XCLK */ + 0x040 MUX_M1 /* I2S0_XFS */ + >; + }; + }; + + pmx5: pinmux@e896c800 { + compatible = "pinconf-single"; + reg = <0x0 0xe896c800 0x0 0x200>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + + pmu_cfg_func: pmu_cfg_func { + pinctrl-single,pins = < + 0x010 0x0 /* PMU1_SSI */ + 0x014 0x0 /* PMU2_SSI */ + 0x018 0x0 /* PMU_CLKOUT */ + 0x10c 0x0 /* PMU_HKADC_SSI */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_06MA DRIVE6_MASK + >; + }; + + i2c3_cfg_func: i2c3_cfg_func { + pinctrl-single,pins = < + 0x038 0x0 /* I2C3_SCL */ + 0x03c 0x0 /* I2C3_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + csi0_pwd_n_cfg_func: csi0_pwd_n_cfg_func { + pinctrl-single,pins = < + 0x050 0x0 /* CSI0_PWD_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + csi1_pwd_n_cfg_func: csi1_pwd_n_cfg_func { + pinctrl-single,pins = < + 0x058 0x0 /* CSI1_PWD_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + isp0_cfg_func: isp0_cfg_func { + pinctrl-single,pins = < + 0x064 0x0 /* ISP_CLK0 */ + 0x070 0x0 /* ISP_SCL0 */ + 0x074 0x0 /* ISP_SDA0 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK>; + }; + + isp1_cfg_func: isp1_cfg_func { + pinctrl-single,pins = < + 0x068 0x0 /* ISP_CLK1 */ + 0x078 0x0 /* ISP_SCL1 */ + 0x07c 0x0 /* ISP_SDA1 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + pwr_key_cfg_func: pwr_key_cfg_func { + pinctrl-single,pins = < + 0x08c 0x0 /* GPIO_034 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart1_cfg_func: uart1_cfg_func { + pinctrl-single,pins = < + 0x0b4 0x0 /* UART1_RXD */ + 0x0b8 0x0 /* UART1_TXD */ + 0x0bc 0x0 /* UART1_CTS_N */ + 0x0c0 0x0 /* UART1_RTS_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart2_cfg_func: uart2_cfg_func { + pinctrl-single,pins = < + 0x0c8 0x0 /* UART2_CTS_N */ + 0x0cc 0x0 /* UART2_RTS_N */ + 0x0d0 0x0 /* UART2_TXD */ + 0x0d4 0x0 /* UART2_RXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart5_cfg_func: uart5_cfg_func { + pinctrl-single,pins = < + 0x0c8 0x0 /* UART5_RXD */ + 0x0cc 0x0 /* UART5_TXD */ + 0x0d0 0x0 /* UART5_CTS_N */ + 0x0d4 0x0 /* UART5_RTS_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + cam0_rst_cfg_func: cam0_rst_cfg_func { + pinctrl-single,pins = < + 0x0d4 0x0 /* CAM0_RST */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + uart0_cfg_func: uart0_cfg_func { + pinctrl-single,pins = < + 0x0d8 0x0 /* UART0_RXD */ + 0x0dc 0x0 /* UART0_TXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart6_cfg_func: uart6_cfg_func { + pinctrl-single,pins = < + 0x0d8 0x0 /* UART6_CTS_N */ + 0x0dc 0x0 /* UART6_RTS_N */ + 0x0e0 0x0 /* UART6_RXD */ + 0x0e4 0x0 /* UART6_TXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart3_cfg_func: uart3_cfg_func { + pinctrl-single,pins = < + 0x0e8 0x0 /* UART3_CTS_N */ + 0x0ec 0x0 /* UART3_RTS_N */ + 0x0f0 0x0 /* UART3_RXD */ + 0x0f4 0x0 /* UART3_TXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart4_cfg_func: uart4_cfg_func { + pinctrl-single,pins = < + 0x0f8 0x0 /* UART4_CTS_N */ + 0x0fc 0x0 /* UART4_RTS_N */ + 0x100 0x0 /* UART4_RXD */ + 0x104 0x0 /* UART4_TXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + cam1_rst_cfg_func: cam1_rst_cfg_func { + pinctrl-single,pins = < + 0x130 0x0 /* CAM1_RST */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + }; + + pmx6: pinmux@ff3b6800 { + compatible = "pinconf-single"; + reg = <0x0 0xff3b6800 0x0 0x18>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + + ufs_cfg_func: ufs_cfg_func { + pinctrl-single,pins = < + 0x000 0x0 /* UFS_REF_CLK */ + 0x004 0x0 /* UFS_RST_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_08MA DRIVE6_MASK + >; + }; + + spi3_cfg_func: spi3_cfg_func { + pinctrl-single,pins = < + 0x008 0x0 /* SPI3_CLK */ + 0x0 /* SPI3_DI */ + 0x010 0x0 /* SPI3_DO */ + 0x014 0x0 /* SPI3_CS0_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + }; + + pmx7: pinmux@ff3fd800 { + compatible = "pinconf-single"; + reg = <0x0 0xff3fd800 0x0 0x18>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + + sdio_clk_cfg_func: sdio_clk_cfg_func { + pinctrl-single,pins = < + 0x000 0x0 /* SDIO_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_32MA DRIVE6_MASK + >; + }; + + sdio_cfg_func: sdio_cfg_func { + pinctrl-single,pins = < + 0x004 0x0 /* SDIO_CMD */ + 0x008 0x0 /* SDIO_DATA0 */ + 0x00c 0x0 /* SDIO_DATA1 */ + 0x010 0x0 /* SDIO_DATA2 */ + 0x014 0x0 /* SDIO_DATA3 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_19MA DRIVE6_MASK + >; + }; + }; + + pmx8: pinmux@ff37e800 { + compatible = "pinconf-single"; + reg = <0x0 0xff37e800 0x0 0x18>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + + sd_clk_cfg_func: sd_clk_cfg_func { + pinctrl-single,pins = < + 0x000 0x0 /* SD_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_32MA + DRIVE6_MASK + >; + }; + + sd_cfg_func: sd_cfg_func { + pinctrl-single,pins = < + 0x004 0x0 /* SD_CMD */ + 0x008 0x0 /* SD_DATA0 */ + 0x00c 0x0 /* SD_DATA1 */ + 0x010 0x0 /* SD_DATA2 */ + 0x014 0x0 /* SD_DATA3 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_19MA + DRIVE6_MASK + >; + }; + }; + + pmx9: pinmux@fff11800 { + compatible = "pinconf-single"; + reg = <0x0 0xfff11800 0x0 0xbc>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + + i2c0_cfg_func: i2c0_cfg_func { + pinctrl-single,pins = < + 0x01c 0x0 /* I2C0_SCL */ + 0x020 0x0 /* I2C0_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + i2c1_cfg_func: i2c1_cfg_func { + pinctrl-single,pins = < + 0x024 0x0 /* I2C1_SCL */ + 0x028 0x0 /* I2C1_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + i2c7_cfg_func: i2c7_cfg_func { + pinctrl-single,pins = < + 0x02c 0x0 /* I2C7_SCL */ + 0x030 0x0 /* I2C7_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + slimbus_cfg_func: slimbus_cfg_func { + pinctrl-single,pins = < + 0x034 0x0 /* SLIMBUS_CLK */ + 0x038 0x0 /* SLIMBUS_DATA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + i2s0_cfg_func: i2s0_cfg_func { + pinctrl-single,pins = < + 0x040 0x0 /* I2S0_DI */ + 0x044 0x0 /* I2S0_DO */ + 0x048 0x0 /* I2S0_XCLK */ + 0x04c 0x0 /* I2S0_XFS */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + i2s2_cfg_func: i2s2_cfg_func { + pinctrl-single,pins = < + 0x050 0x0 /* I2S2_DI */ + 0x054 0x0 /* I2S2_DO */ + 0x058 0x0 /* I2S2_XCLK */ + 0x05c 0x0 /* I2S2_XFS */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + pcie_cfg_func: pcie_cfg_func { + pinctrl-single,pins = < + 0x094 0x0 /* PCIE_CLKREQ_N */ + 0x098 0x0 /* PCIE_WAKE_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + spi2_cfg_func: spi2_cfg_func { + pinctrl-single,pins = < + 0x09c 0x0 /* SPI2_CLK */ + 0x0a0 0x0 /* SPI2_DI */ + 0x0a4 0x0 /* SPI2_DO */ + 0x0a8 0x0 /* SPI2_CS0_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + usb_cfg_func: usb_cfg_func { + pinctrl-single,pins = < + 0x0ac 0x0 /* GPIO_219 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + }; + }; +}; diff --git a/Platforms/Hisilicon/HiKey/HiKey.dsc b/Platforms/Hisilicon/HiKey/HiKey.dsc index 28bc47d..1e18c51 100644 --- a/Platforms/Hisilicon/HiKey/HiKey.dsc +++ b/Platforms/Hisilicon/HiKey/HiKey.dsc @@ -158,6 +158,7 @@ NonDiscoverableDeviceRegistrationLib|MdeModulePkg/Library/NonDiscoverableDeviceRegistrationLib/NonDiscoverableDeviceRegistrationLib.inf
ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
SecurityManagementLib|MdeModulePkg/Library/DxeSecurityManagementLib/DxeSecurityManagementLib.inf
+ DtPlatformDtbLoaderLib|EmbeddedPkg/Library/DxeDtPlatformDtbLoaderLibDefault/DxeDtPlatformDtbLoaderLibDefault.inf
[LibraryClasses.common.DXE_RUNTIME_DRIVER]
CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
@@ -315,6 +316,7 @@ DEFINE SERIAL_BASE = 0xF7113000 # UART3
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|$(SERIAL_BASE)
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultReceiveFifoDepth|0
gArmPlatformTokenSpaceGuid.PL011UartInteger|10
gArmPlatformTokenSpaceGuid.PL011UartFractional|26
@@ -358,7 +360,7 @@ # Android Loader
#
gEmbeddedTokenSpaceGuid.PcdAndroidBootDevicePath|L"VenHw(0D51905B-B77E-452A-A2C0-ECA0CC8D514A,00D023F70000000000)/eMMC(0x0)/Ctrl(0x0)/HD(6,GPT,5C0F213C-17E1-4149-88C8-8B50FB4EC70E,0x7000,0x20000)"
- gEmbeddedTokenSpaceGuid.PcdSdBootDevicePath|L"VenHw(0D51905B-B77E-452A-A2C0-ECA0CC8D514A,00E023F70000000000)/SD(0x0)/HD(1,MBR,0x263000B1,0x3F,0x21FC0)"
+ gEmbeddedTokenSpaceGuid.PcdSdBootDevicePath|L"VenHw(0D51905B-B77E-452A-A2C0-ECA0CC8D514A,00E023F70000000000)/SD(0x0)"
gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|1
@@ -427,7 +429,7 @@ MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceDxe.inf
OpenPlatformPkg/Drivers/SdMmc/DwMmcHcDxe/DwMmcHcDxe.inf
MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.inf
- #MdeModulePkg/Bus/Sd/SdDxe/SdDxe.inf
+ MdeModulePkg/Bus/Sd/SdDxe/SdDxe.inf
OpenPlatformPkg/Platforms/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
@@ -496,6 +498,9 @@ MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
FatPkg/EnhancedFatDxe/Fat.inf
+ # DTB
+ EmbeddedPkg/Drivers/DtPlatformDxe/DtPlatformDxe.inf
+
#
# Bds
#
diff --git a/Platforms/Hisilicon/HiKey/HiKey.fdf b/Platforms/Hisilicon/HiKey/HiKey.fdf index 91f6f3e..634a6a5 100644 --- a/Platforms/Hisilicon/HiKey/HiKey.fdf +++ b/Platforms/Hisilicon/HiKey/HiKey.fdf @@ -132,7 +132,7 @@ READ_LOCK_STATUS = TRUE INF MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceDxe.inf
INF OpenPlatformPkg/Drivers/SdMmc/DwMmcHcDxe/DwMmcHcDxe.inf
INF MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.inf
- #INF MdeModulePkg/Bus/Sd/SdDxe/SdDxe.inf
+ INF MdeModulePkg/Bus/Sd/SdDxe/SdDxe.inf
INF OpenPlatformPkg/Platforms/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
@@ -209,6 +209,13 @@ READ_LOCK_STATUS = TRUE INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
INF MdeModulePkg/Application/UiApp/UiApp.inf
+ # add Device Tree to the Firmware Volume
+ INF EmbeddedPkg/Drivers/DtPlatformDxe/DtPlatformDxe.inf
+ FILE FREEFORM = 25462CDA-221F-47DF-AC1D-259CFAA4E326 {
+ SECTION RAW = OpenPlatformPkg/Platforms/Hisilicon/DeviceTree/hi6220-hikey.dtb
+ }
+
+
[FV.FVMAIN_COMPACT]
FvAlignment = 8
ERASE_POLARITY = 1
diff --git a/Platforms/Hisilicon/HiKey/HiKeyFastbootDxe/HiKeyFastbootDxe.c b/Platforms/Hisilicon/HiKey/HiKeyFastbootDxe/HiKeyFastbootDxe.c index a62c094..865258b 100644 --- a/Platforms/Hisilicon/HiKey/HiKeyFastbootDxe/HiKeyFastbootDxe.c +++ b/Platforms/Hisilicon/HiKey/HiKeyFastbootDxe/HiKeyFastbootDxe.c @@ -540,7 +540,8 @@ HiKeyFastbootPlatformGetVar ( } else if ( !AsciiStrnCmp (Name, "partition-type", 14)) {
DEBUG ((DEBUG_ERROR, "Fastboot platform: check for partition-type:%a\n", (Name + 15)));
if ( !AsciiStrnCmp ( (Name + 15) , "system", 6) || !AsciiStrnCmp ( (Name + 15) , "userdata", 8)
- || !AsciiStrnCmp ( (Name + 15) , "cache", 5)) {
+ || !AsciiStrnCmp ( (Name + 15) , "cache", 5)
+ || !AsciiStrnCmp ( (Name + 15) , "vendor", 6)) {
AsciiStrCpy (Value, "ext4");
} else {
AsciiStrCpy (Value, "raw");
@@ -562,15 +563,32 @@ HiKeyFastbootPlatformOemCommand ( {
EFI_STATUS Status;
CHAR16 UnicodeSN[SERIAL_NUMBER_SIZE];
+ UINTN Size;
+ Size = AsciiStrLen ("serialno");
if (AsciiStrCmp (Command, "Demonstrate") == 0) {
DEBUG ((DEBUG_ERROR, "ARM OEM Fastboot command 'Demonstrate' received.\n"));
return EFI_SUCCESS;
- } else if (AsciiStrCmp (Command, "serialno") == 0) {
- Status = GenerateUsbSN (UnicodeSN);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "Failed to generate USB Serial Number.\n"));
- return Status;
+ } else if (AsciiStrnCmp (Command, "serialno", Size) == 0) {
+ while (*(Command + Size) == ' ') {
+ Size++;
+ }
+ if (AsciiStrnCmp (Command + Size, "set", AsciiStrLen ("set")) == 0) {
+ Size += AsciiStrLen ("set");
+ while (*(Command + Size) == ' ') {
+ Size++;
+ }
+ Status = AssignUsbSN (Command + Size, UnicodeSN);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Failed to set USB Serial Number.\n"));
+ return Status;
+ }
+ } else {
+ Status = GenerateUsbSN (UnicodeSN);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Failed to generate USB Serial Number.\n"));
+ return Status;
+ }
}
Status = StoreSNToBlock (mFlashHandle, SERIAL_NUMBER_LBA, UnicodeSN);
return Status;
diff --git a/Platforms/Hisilicon/HiKey/HiKeyMmcDxe/HiKeyMmcDxe.c b/Platforms/Hisilicon/HiKey/HiKeyMmcDxe/HiKeyMmcDxe.c index 0f58697..e7d3c6c 100644 --- a/Platforms/Hisilicon/HiKey/HiKeyMmcDxe/HiKeyMmcDxe.c +++ b/Platforms/Hisilicon/HiKey/HiKeyMmcDxe/HiKeyMmcDxe.c @@ -79,6 +79,7 @@ HiKeyGetCapability ( BOOLEAN EFIAPI HiKeyCardDetect ( + IN EFI_HANDLE Controller, IN UINT8 Slot ) { @@ -86,9 +87,9 @@ HiKeyCardDetect ( EMBEDDED_GPIO *Gpio; UINTN Value; - if (Slot == 0) { + if (DwMmcCapability[0].Controller == Controller) { return TRUE; - } else if (Slot == 1) { + } else if (DwMmcCapability[1].Controller == Controller) { Status = gBS->LocateProtocol (&gEmbeddedGpioProtocolGuid, NULL, (VOID **)&Gpio); if (EFI_ERROR (Status)) { DEBUG ((DEBUG_ERROR, "Failed to get GPIO protocol: %r\n", Status)); @@ -108,9 +109,8 @@ HiKeyCardDetect ( return TRUE; } return FALSE; - } else { - return FALSE; } + return FALSE; } PLATFORM_DW_MMC_PROTOCOL mDwMmcDevice = { diff --git a/Platforms/Hisilicon/HiKey960/HiKey960.dsc b/Platforms/Hisilicon/HiKey960/HiKey960.dsc index bf02a29..6d29dec 100644 --- a/Platforms/Hisilicon/HiKey960/HiKey960.dsc +++ b/Platforms/Hisilicon/HiKey960/HiKey960.dsc @@ -159,6 +159,7 @@ NonDiscoverableDeviceRegistrationLib|MdeModulePkg/Library/NonDiscoverableDeviceRegistrationLib/NonDiscoverableDeviceRegistrationLib.inf
ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
SecurityManagementLib|MdeModulePkg/Library/DxeSecurityManagementLib/DxeSecurityManagementLib.inf
+ DtPlatformDtbLoaderLib|EmbeddedPkg/Library/DxeDtPlatformDtbLoaderLibDefault/DxeDtPlatformDtbLoaderLibDefault.inf
[LibraryClasses.common.DXE_RUNTIME_DRIVER]
HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
@@ -281,7 +282,7 @@ gEmbeddedTokenSpaceGuid.PcdEmbeddedDefaultTextColor|0x07
gEmbeddedTokenSpaceGuid.PcdEmbeddedMemVariableStoreSize|0x10000
- gArmPlatformTokenSpaceGuid.PcdFirmwareVendor|"Linaro"
+ gArmPlatformTokenSpaceGuid.PcdFirmwareVendor|"hikey960"
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L"Alpha"
gEmbeddedTokenSpaceGuid.PcdEmbeddedPrompt|"HiKey960"
@@ -311,6 +312,7 @@ DEFINE SERIAL_BASE = 0xFFF32000
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|$(SERIAL_BASE)
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultReceiveFifoDepth|0
gArmPlatformTokenSpaceGuid.PL011UartInteger|10
gArmPlatformTokenSpaceGuid.PL011UartFractional|26
@@ -368,7 +370,7 @@ # Android Loader
#
gEmbeddedTokenSpaceGuid.PcdAndroidBootDevicePath|L"VenHw(0D51905B-B77E-452A-A2C0-ECA0CC8D514A,00003BFF0000000000)/UFS(0x0,0x3)/HD(7,GPT,D3340696-9B95-4C64-8DF6-E6D4548FBA41,0x12100,0x4000)"
- gEmbeddedTokenSpaceGuid.PcdSdBootDevicePath|L"VenHw(0D51905B-B77E-452A-A2C0-ECA0CC8D514A,00F037FF0000000000)/SD(0x0)/HD(1,MBR,0x263000B1,0x3F,0x21FC0)"
+ gEmbeddedTokenSpaceGuid.PcdSdBootDevicePath|L"VenHw(0D51905B-B77E-452A-A2C0-ECA0CC8D514A,00F037FF0000000000)/SD(0x0)"
gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|1
@@ -486,6 +488,10 @@ MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+ FatPkg/EnhancedFatDxe/Fat.inf
+
+ # DTB
+ EmbeddedPkg/Drivers/DtPlatformDxe/DtPlatformDxe.inf
#
# USB Peripheral Support
diff --git a/Platforms/Hisilicon/HiKey960/HiKey960.fdf b/Platforms/Hisilicon/HiKey960/HiKey960.fdf index ec94e60..c36b1be 100644 --- a/Platforms/Hisilicon/HiKey960/HiKey960.fdf +++ b/Platforms/Hisilicon/HiKey960/HiKey960.fdf @@ -215,6 +215,12 @@ READ_LOCK_STATUS = TRUE INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
INF MdeModulePkg/Application/UiApp/UiApp.inf
+ # add Device Tree to the Firmware Volume
+ INF EmbeddedPkg/Drivers/DtPlatformDxe/DtPlatformDxe.inf
+ FILE FREEFORM = 25462CDA-221F-47DF-AC1D-259CFAA4E326 {
+ SECTION RAW = OpenPlatformPkg/Platforms/Hisilicon/DeviceTree/hi3660-hikey960.dtb
+ }
+
[FV.FVMAIN_COMPACT]
FvAlignment = 8
diff --git a/Platforms/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c b/Platforms/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c index 6ef1c3d..b4e0e1b 100644 --- a/Platforms/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c +++ b/Platforms/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c @@ -29,6 +29,7 @@ #include <Library/IoLib.h>
#include <Library/PcdLib.h>
#include <Library/PrintLib.h>
+#include <Library/SerialPortLib.h>
#include <Library/TimerLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiRuntimeServicesTableLib.h>
@@ -96,6 +97,12 @@ typedef struct { CHAR16 UnicodeSN[SERIAL_NUMBER_SIZE];
} RANDOM_SERIAL_NUMBER;
+enum {
+ BOOT_MODE_RECOVERY = 0,
+ BOOT_MODE_NORMAL,
+ BOOT_MODE_MASK = 1,
+};
+
STATIC UINTN mBoardId;
STATIC EMBEDDED_GPIO *mGpio;
@@ -348,6 +355,13 @@ OnEndOfDxe ( IN VOID *Context
)
{
+ UINT32 BootMode;
+
+ BootMode = MmioRead32 (SCTRL_BAK_DATA0) & BOOT_MODE_MASK;
+ if (BootMode == BOOT_MODE_RECOVERY) {
+ SerialPortWrite ((UINT8 *)"WARNING: CAN NOT BOOT KERNEL IN RECOVERY MODE!\r\n", 48);
+ SerialPortWrite ((UINT8 *)"Switch to normal boot mode, then reboot to boot kernel.\r\n", 57);
+ }
}
EFI_STATUS
diff --git a/Platforms/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf b/Platforms/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf index df668a8..f9c0c94 100644 --- a/Platforms/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf +++ b/Platforms/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf @@ -39,6 +39,7 @@ NonDiscoverableDeviceRegistrationLib
PcdLib
PrintLib
+ SerialPortLib
TimerLib
UefiBootServicesTableLib
UefiDriverEntryPoint
diff --git a/Platforms/Hisilicon/HiKey960/HiKey960FastbootDxe/HiKey960FastbootDxe.c b/Platforms/Hisilicon/HiKey960/HiKey960FastbootDxe/HiKey960FastbootDxe.c index c87040d..355119c 100644 --- a/Platforms/Hisilicon/HiKey960/HiKey960FastbootDxe/HiKey960FastbootDxe.c +++ b/Platforms/Hisilicon/HiKey960/HiKey960FastbootDxe/HiKey960FastbootDxe.c @@ -612,15 +612,32 @@ HiKey960FastbootPlatformOemCommand ( {
EFI_STATUS Status;
CHAR16 UnicodeSN[SERIAL_NUMBER_SIZE];
+ UINTN Size;
+ Size = AsciiStrLen ("serialno");
if (AsciiStrCmp (Command, "Demonstrate") == 0) {
DEBUG ((DEBUG_ERROR, "ARM OEM Fastboot command 'Demonstrate' received.\n"));
return EFI_SUCCESS;
- } else if (AsciiStrCmp (Command, "serialno") == 0) {
- Status = GenerateUsbSN (UnicodeSN);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "Failed to generate USB Serial Number.\n"));
- return Status;
+ } else if (AsciiStrnCmp (Command, "serialno", Size) == 0) {
+ while (*(Command + Size) == ' ') {
+ Size++;
+ }
+ if (AsciiStrnCmp (Command + Size, "set", AsciiStrLen ("set")) == 0) {
+ Size += AsciiStrLen ("set");
+ while (*(Command + Size) == ' ') {
+ Size++;
+ }
+ Status = AssignUsbSN (Command + Size, UnicodeSN);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Failed to set USB Serial Number.\n"));
+ return Status;
+ }
+ } else {
+ Status = GenerateUsbSN (UnicodeSN);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Failed to generate USB Serial Number.\n"));
+ return Status;
+ }
}
Status = StoreSNToBlock (mFlashHandle, SERIAL_NUMBER_LBA, UnicodeSN);
return Status;
diff --git a/Platforms/Hisilicon/HiKey960/HiKey960MmcDxe/HiKey960MmcDxe.c b/Platforms/Hisilicon/HiKey960/HiKey960MmcDxe/HiKey960MmcDxe.c index 3e52270..4d8c476 100644 --- a/Platforms/Hisilicon/HiKey960/HiKey960MmcDxe/HiKey960MmcDxe.c +++ b/Platforms/Hisilicon/HiKey960/HiKey960MmcDxe/HiKey960MmcDxe.c @@ -67,6 +67,7 @@ HiKey960GetCapability ( BOOLEAN EFIAPI HiKey960CardDetect ( + IN EFI_HANDLE Controller, IN UINT8 Slot ) { diff --git a/Platforms/Hisilicon/HiKey960/Include/Hi3660.h b/Platforms/Hisilicon/HiKey960/Include/Hi3660.h index 939f7f0..0d810d8 100644 --- a/Platforms/Hisilicon/HiKey960/Include/Hi3660.h +++ b/Platforms/Hisilicon/HiKey960/Include/Hi3660.h @@ -30,6 +30,8 @@ #define SCTRL_SCFPLLCTRL0 (SCTRL_REG_BASE + 0x120)
#define SCTRL_SCFPLLCTRL0_FPLL0_EN (1 << 0)
+#define SCTRL_BAK_DATA0 (SCTRL_REG_BASE + 0x40C)
+
#define USB3OTG_BC_REG_BASE 0xFF200000
#define USB3OTG_CTRL0 (USB3OTG_BC_REG_BASE + 0x000)
diff --git a/Platforms/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c b/Platforms/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c index b1586a8..5c59846 100644 --- a/Platforms/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c +++ b/Platforms/Hisilicon/Library/PlatformBootManagerLib/PlatformBm.c @@ -341,9 +341,6 @@ PlatformRegisterBootSd ( CHAR16 *BootPathStr;
EFI_DEVICE_PATH_FROM_TEXT_PROTOCOL *EfiDevicePathFromTextProtocol;
EFI_DEVICE_PATH *DevicePath;
- EFI_DEVICE_PATH *FileDevicePath;
- FILEPATH_DEVICE_PATH *FilePath;
- UINTN Size;
EFI_BOOT_MANAGER_LOAD_OPTION NewOption;
EFI_BOOT_MANAGER_LOAD_OPTION *BootOptions;
UINTN BootOptionCount;
@@ -359,19 +356,6 @@ PlatformRegisterBootSd ( DevicePath = (EFI_DEVICE_PATH *)EfiDevicePathFromTextProtocol->ConvertTextToDevicePath (BootPathStr);
ASSERT (DevicePath != NULL);
- Size = StrSize (SD_FILE_NAME);
- FileDevicePath = AllocatePool (Size + SIZE_OF_FILEPATH_DEVICE_PATH + END_DEVICE_PATH_LENGTH);
- if (FileDevicePath != NULL) {
- FilePath = (FILEPATH_DEVICE_PATH *) FileDevicePath;
- FilePath->Header.Type = MEDIA_DEVICE_PATH;
- FilePath->Header.SubType = MEDIA_FILEPATH_DP;
- CopyMem (&FilePath->PathName, SD_FILE_NAME, Size);
- SetDevicePathNodeLength (&FilePath->Header, Size + SIZE_OF_FILEPATH_DEVICE_PATH);
- SetDevicePathEndNode (NextDevicePathNode (&FilePath->Header));
-
- DevicePath = AppendDevicePath (DevicePath, FileDevicePath);
- FreePool (FileDevicePath);
- }
Status = EfiBootManagerInitializeLoadOption (
&NewOption,
LoadOptionNumberUnassigned,
|