1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
|
#Test
NTP_SERVER=time.gpsonextra.net
#Asia
# NTP_SERVER=asia.pool.ntp.org
#Europe
# NTP_SERVER=europe.pool.ntp.org
#North America
# NTP_SERVER=north-america.pool.ntp.org
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra2.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra2.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra2.bin
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
DEBUG_LEVEL = 4
# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=0
# supl version 1.0
SUPL_VER=0x10000
# Error Estimate
# _SET = 1
# _CLEAR = 0
ERR_ESTIMATE=0
# GPS Capabilities bit mask
# SCHEDULING = 1
# MSB = 2
# MSA = 4
# ULP = 0x20
# ON_DEMAND_TIME = 0x10 // yunu.lee
# default = MSA | MSB | SCHEDULING | ULP
CAPABILITIES=0x14
# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
# ACCURACY_THRES=5000
################################
##### AGPS server settings #####
################################
# FOR SUPL SUPPORT, set the following
# SUPL_HOST=supl.host.com or IP
# SUPL_PORT=1234
# FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
# C2K_PORT=1234
################################
# Sensor Settings
################################
# Needs to be set explicitly based on sensor
# There is no default value.
GYRO_BIAS_RANDOM_WALK=0.00001
# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0)
SENSOR_ACCEL_BATCHES_PER_SEC=3
SENSOR_ACCEL_SAMPLES_PER_BATCH=5
SENSOR_GYRO_BATCHES_PER_SEC=3
SENSOR_GYRO_SAMPLES_PER_BATCH=5
# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0)
SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4
SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25
SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4
SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25
# INS Filter Mode (0=Enable, 1=Disable)
SENSOR_ALGORITHM_CONFIG_MASK=1
# Sensor Control Mode (0=AUTO, 1=FORCE_ON)
SENSOR_CONTROL_MODE=0
# Enable or Disable Sensors for GPS use (0=Enable, 1=Disable)
SENSOR_USAGE=0
# Choose GSIFF sensor provider (1=DSPS, 2=Android NDK)
SENSOR_PROVIDER=2
################################
# Indoor Positioning Settings
################################
# 0: QUIPC disabled, 1: QUIPC enabled, 2: forced QUIPC only
QUIPC_ENABLED = 0
################################
# EXTRA SETTINGS
################################
# Enable or Disable Wiper (1=Enable, 0=Disable)
ENABLE_WIPER=0
# NMEA provider (1=Modem Processor, 0=Application Processor)
NMEA_PROVIDER=1
####################################
# LTE Positioning Profile Settings
####################################
# 0: Enable RRLP on LTE(Default) 1: Enable LPP_User_Plane on LTE
LPP_PROFILE = 0
|
