t0lte: merge in t0ltecdma

with minor changes to i605, l900, and r950, this will make the
t0ltecdma repo obsolete.

Change-Id: I5b28c956327856f2aa2bbf244a2b3156743d6097

7 files changed, 413 insertions, 0 deletions

diff --git a/overlay-cdma/frameworks/base/core/res/res/values/bools.xml b/overlay-cdma/frameworks/base/core/res/res/values/bools.xml
new file mode 100644
index 0000000..e9cdf05
--- /dev/null
+++ b/overlay-cdma/frameworks/base/core/res/res/values/bools.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2012 The CyanogenMod Project <http://www.cyanogenmod.org>
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+           http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<resources xmlns:xliff="urnasis:names:tc:xliff:document:1.2 ">
+  <!-- <bool name="has_powercontrol_widget">true</bool> -->
+</resources>
diff --git a/overlay-cdma/frameworks/base/core/res/res/values/config.xml b/overlay-cdma/frameworks/base/core/res/res/values/config.xml
new file mode 100755
index 0000000..e95be49
--- /dev/null
+++ b/overlay-cdma/frameworks/base/core/res/res/values/config.xml
@@ -0,0 +1,189 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2011, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!-- These resources are around just to allow their values to be customized
+     for different hardware and product builds. -->
+<resources>
+
+    <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
+         autodetected from the Configuration. -->
+    <bool name="config_showNavigationBar">false</bool>
+
+    <!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION.
+         Please don't copy them, copy anything else. -->
+
+    <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
+         [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet]  -->
+    <!-- the 5th element "resore-time" indicates the number of milliseconds to delay
+         before automatically restore the default connection.  Set -1 if the connection
+         does not require auto-restore. -->
+    <!-- the 6th element indicates boot-time dependency-met value. -->
+    <string-array translatable="false" name="networkAttributes">
+        <item>"wifi,1,1,1,-1,true"</item>
+        <item>"mobile,0,0,0,-1,true"</item>
+        <item>"mobile_mms,2,0,2,60000,true"</item>
+        <item>"mobile_supl,3,0,2,60000,true"</item>
+        <item>"mobile_dun,4,0,3,60000,true"</item>
+        <item>"mobile_hipri,5,0,3,60000,true"</item>
+        <item>"mobile_bluetooth,7,7,1,-1,true"</item>
+        <item>"mobile_fota,10,0,2,60000,true"</item>
+        <item>"mobile_ims,11,0,2,-1,true"</item>
+        <item>"mobile_cbs,12,0,2,60000,true"</item>
+        <item>"wifi_p2p,13,1,0,-1,true"</item>
+    </string-array>
+
+    <!-- An Array of "[ConnectivityManager connectionType],
+         [# simultaneous connection types]"  -->
+    <string-array translatable="false" name="radioAttributes">
+        <item>"1,1"</item>
+        <item>"0,1"</item>
+        <item>"7,1"</item>
+    </string-array>
+
+    <!-- List of regexpressions describing the interface (if any) that represent tetherable
+         USB interfaces.  If the device doesn't want to support tething over USB this should
+         be empty.  An example would be "usb.*" -->
+    <string-array translatable="false" name="config_tether_usb_regexs">
+        <item>"usb0"</item>
+		<item>"rndis0"</item>
+    </string-array>
+	
+    <integer-array name="config_data_usage_network_types">
+        <item>0</item>
+        <item>2</item>
+        <item>3</item>
+        <item>4</item>
+        <item>5</item>
+    </integer-array>
+
+    <!-- Array of ConnectivityManager.TYPE_xxxx values allowable for tethering -->
+    <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or
+    <!== [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH -->
+    <integer-array translatable="false" name="config_tether_upstream_types">
+        <item>0</item>
+        <item>1</item>
+        <item>5</item>
+        <item>7</item>
+    </integer-array>
+    
+    <!-- If the DUN connection for this CDMA device supports more than just DUN -->
+    <!-- traffic you should list them here. -->
+    <!-- If this device is not CDMA this is ignored.  If this list is empty on -->
+    <!-- a DUN-requireing CDMA device, the DUN APN will support -->
+    <!-- just DUN. -->
+    <string-array translatable="false" name="config_cdma_dun_supported_types">
+        <item>"default"</item>
+        <item>"dun"</item>
+        <item>"mms"</item>
+        <item>"supl"</item>
+    </string-array>
+
+    <!-- The default iface on which to monitor data use -->
+    <string name="config_datause_iface">rmnet0</string>
+
+    <!-- Is the notification LED intrusive? Used to decide if there should be a disable option -->
+    <bool name="config_intrusiveNotificationLed">true</bool>
+
+    <!-- Is the battery LED intrusive? Used to decide if there should be a disable option -->
+    <bool name="config_intrusiveBatteryLed">true</bool>
+
+    <!-- Does the battery LED support multiple colors? Used to decide if the user can change the colors -->
+    <bool name="config_multiColorBatteryLed">true</bool>
+
+<!-- Vibrator pattern for feedback about a long screen/key press -->
+    <integer-array name="config_longPressVibePattern">
+        <item>0</item>
+        <item>1</item>
+        <item>20</item>
+        <item>21</item>
+    </integer-array>
+
+    <!-- Vibrator pattern for feedback about touching a virtual key -->
+    <integer-array name="config_virtualKeyVibePattern">
+        <item>0</item>
+        <item>1</item>
+        <item>20</item>
+        <item>21</item>
+    </integer-array>
+
+    <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap -->
+    <integer-array name="config_keyboardTapVibePattern">
+        <item>20</item>
+    </integer-array>
+
+    <!-- Vibrator pattern for feedback about booting with safe mode disabled -->
+    <integer-array name="config_safeModeDisabledVibePattern">
+        <item>0</item>
+        <item>1</item>
+        <item>20</item>
+        <item>21</item>
+    </integer-array>
+
+    <!-- Vibrator pattern for feedback about booting with safe mode disabled -->
+    <integer-array name="config_safeModeEnabledVibePattern">
+        <item>0</item>
+        <item>1</item>
+        <item>20</item>
+        <item>21</item>
+        <item>500</item>
+        <item>600</item>
+    </integer-array>
+
+    <!-- Vibrator pattern for feedback about hitting a scroll barrier -->
+    <integer-array name="config_scrollBarrierVibePattern">
+        <item>0</item>
+        <item>15</item>
+        <item>10</item>
+        <item>10</item>
+    </integer-array>
+
+    <!-- Default color for notification LED is white. -->
+    <color name="config_defaultNotificationColor">#ffffffff</color>
+
+    <!-- Default LED on time for notification LED in milliseconds. -->
+    <integer name="config_defaultNotificationLedOn">1000</integer>
+
+    <!-- Default LED off time for notification LED in milliseconds. -->
+    <integer name="config_defaultNotificationLedOff">9000</integer>
+
+    <!-- Allow the menu hard key to be disabled in LockScreen on some devices -->
+    <bool name="config_disableMenuKeyInLockScreen">true</bool>
+
+    <!-- Disable the home key unlock setting -->
+    <bool name="config_disableHomeUnlockSetting">false</bool>
+
+    <!-- Workaround for devices with broken keyboards -->
+    <bool name="config_forceDisableHardwareKeyboard">true</bool>
+
+    <!-- Hardware 'face' keys present on the device, stored as a bit field.
+         This integer should equal the sum of the corresponding value for each
+         of the following keys present:
+             1 - Home
+             2 - Back
+             4 - Menu
+             8 - Assistant (search)
+            16 - App switch
+         For example, a device with Home, Back and Menu keys would set this
+         config to 7. -->
+    <integer name="config_deviceHardwareKeys">7</integer>
+    
+    <!-- Boolean to enable Stylus gestures -->
+    <bool name="config_stylusGestures">true</bool>
+
+</resources>
diff --git a/overlay-cdma/frameworks/base/core/res/res/xml/power_profile.xml b/overlay-cdma/frameworks/base/core/res/res/xml/power_profile.xml
new file mode 100755
index 0000000..c2c653f
--- /dev/null
+++ b/overlay-cdma/frameworks/base/core/res/res/xml/power_profile.xml
@@ -0,0 +1,69 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+**
+** Copyright 2009, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License")
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<device name="Android">
+  <!-- All values are in mAh except as noted -->
+  <item name="none">0</item>
+  <item name="screen.on">49</item>
+  <item name="bluetooth.active">142</item>
+  <item name="bluetooth.on">0.3</item>
+  <item name="bluetooth.at">35690</item>
+  <item name="screen.full">260</item>
+  <item name="wifi.on">4</item>
+  <item name="wifi.active">120</item>
+  <item name="wifi.scan">220</item>
+  <item name="dsp.audio">88</item>
+  <item name="dsp.video">88</item>
+  <item name="radio.active">185</item>
+  <!-- The current consumed by the radio when it is scanning for a signal -->
+  <item name="radio.scanning">88</item>
+  <item name="gps.on">50</item>
+  <!-- Current consumed by the radio at different signal strengths, when paging -->
+  <array name="radio.on"> <!-- Strength 0 to BINS-1 -->
+      <value>3.4</value>
+      <value>3.4</value>
+  </array>
+  <!-- Different CPU speeds as reported in
+       /sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state -->
+  <array name="cpu.speeds">
+      <value>200000</value>
+      <value>500000</value>
+      <value>800000</value>
+      <value>1000000</value>
+      <value>1200000</value>
+      <value>1400000</value>
+      <value>1600000</value>
+  </array>
+  <!-- Power consumption when CPU is idle -->
+  <item name="cpu.idle">1.4</item>
+  <!-- Power consumption due to wake lock held -->
+  <item name="cpu.awake">44</item>
+  <!-- Power consumption at different speeds -->
+  <array name="cpu.active">
+      <value>55.4</value>
+      <value>82.1</value>
+      <value>113.7</value>
+      <value>140.0</value>
+      <value>170.0</value>
+      <value>200.0</value>
+      <value>230.0</value>
+  </array>
+  <!-- This is the battery capacity in mAh -->
+  <item name="battery.capacity">3100</item>
+</device>
diff --git a/overlay-cdma/frameworks/base/core/res/res/xml/storage_list.xml b/overlay-cdma/frameworks/base/core/res/res/xml/storage_list.xml
new file mode 100755
index 0000000..d9247c5
--- /dev/null
+++ b/overlay-cdma/frameworks/base/core/res/res/xml/storage_list.xml
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+**
+** Copyright 2011, The Android Open Source Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License")
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!-- The <device> element should contain one or more <storage> elements.
+     Exactly one of these should have the attribute primary="true".
+     This storage will be the primary external storage and should have mountPoint="/mnt/sdcard".
+     Each storage should have both a mountPoint and storageDescription attribute.
+     The following attributes are optional:
+
+        primary:    (boolean) this storage is the primary external storage
+        removable:  (boolean) this is removable storage (for example, a real SD card)
+        emulated:   (boolean) the storage is emulated via the FUSE sdcard daemon
+        mtpReserve: (integer) number of megabytes of storage MTP should reserve for free storage
+                     (used for emulated storage that is shared with system's data partition)
+
+      A storage should not have both emulated and removable set to true
+-->
+
+<StorageList xmlns:android="http://schemas.android.com/apk/res/android">
+    <storage android:mountPoint="/storage/sdcard0"
+             android:storageDescription="@string/storage_internal"
+             android:primary="true"
+             android:emulated="true"
+             android:mtpReserve="100" />
+
+    <storage android:mountPoint="/storage/sdcard1"
+             android:storageDescription="@string/storage_sd_card"
+             android:primary="false"
+             android:removable="true"
+             android:allowMassStorage="true" />
+
+    <storage android:mountPoint="/storage/usbdisk0"
+             android:storageDescription="@string/storage_usb"
+             android:primary="false"
+             android:removable="true" />
+</StorageList>
diff --git a/overlay-cdma/packages/apps/Phone/res/values/config.xml b/overlay-cdma/packages/apps/Phone/res/values/config.xml
new file mode 100755
index 0000000..92c6912
--- /dev/null
+++ b/overlay-cdma/packages/apps/Phone/res/values/config.xml
@@ -0,0 +1,44 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2009 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Phone app resources that may need to be customized
+     for different hardware or product builds. -->
+<resources>
+    <!-- Determines if device implements a noise suppression device for in call audio-->
+    <bool name="has_in_call_noise_suppression">true</bool>
+
+    <!-- Audio parameter for setting noise suppression-->
+    <string name="in_call_noise_suppression_audioparameter">dualmic_enabled=false=true</string>
+    
+    <!-- Sprint Message Wait Indicator Quirk
+    If true, message wait indicators are hidden by default on this device
+    unless the user enables it in Call Settings.  This quirk is necessary
+    for the "Phantom Voicemail" issue where notifications that are
+    impossible to dismiss on the Sprint network. -->
+    <bool name="sprint_mwi_quirk">true</bool>
+
+    <!-- Determine whether calls to mute the microphone in PhoneUtils
+         are routed through the android.media.AudioManager class (true) or through
+         the com.android.internal.telephony.Phone interface (false). -->
+    <bool name="send_mic_mute_to_AudioManager">true</bool>
+
+    <!-- Determine whether we want to display the OTA activation screen, which
+         gives the user option to activate or cancel -->
+    <integer name="OtaShowActivationScreen">0</integer>
+    <!-- Determine whether we should show the "listen for instructions" screen after
+         successfully placing the OTA call -->
+    <integer name="OtaShowListeningScreen">1</integer>
+</resources>
diff --git a/overlay-cdma/packages/apps/Torch/res/values/config.xml b/overlay-cdma/packages/apps/Torch/res/values/config.xml
new file mode 100755
index 0000000..d4611e2
--- /dev/null
+++ b/overlay-cdma/packages/apps/Torch/res/values/config.xml
@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/*
+** Copyright 2011, The CyanogenMod Project
+**
+** Licensed under the Apache License, Version 2.0 (the "License");
+** you may not use this file except in compliance with the License.
+** You may obtain a copy of the License at
+**
+**     http://www.apache.org/licenses/LICENSE-2.0
+**
+** Unless required by applicable law or agreed to in writing, software
+** distributed under the License is distributed on an "AS IS" BASIS,
+** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+** See the License for the specific language governing permissions and
+** limitations under the License.
+*/
+-->
+
+<!-- These resources are around just to allow their values to be customized
+     for different hardware and product builds. -->
+<resources>
+    <!-- If there is no sysfs-based control mechanism, enable this -->
+    <bool name="useCameraInterface">false</bool>
+
+    <!-- Full path to the sysfs toggle -->
+    <string name="flashDevice">/sys/class/camera/flash/rear_flash</string>
+
+    <!-- Lowest setting -->
+    <integer name="valueOn">1</integer>
+    <!-- Middle setting -->
+    <integer name="valueHigh">10</integer>
+    <!-- Highest setting, leave -1 if it doesn't exist -->
+    <integer name="valueDeathRay">15</integer>
+
+</resources>
diff --git a/overlay-cdma/packages/apps/Trebuchet/res/values/config.xml b/overlay-cdma/packages/apps/Trebuchet/res/values/config.xml
new file mode 100644
index 0000000..9c8718d
--- /dev/null
+++ b/overlay-cdma/packages/apps/Trebuchet/res/values/config.xml
@@ -0,0 +1,3 @@
+<resources>
+    <integer name="default_cell_count_y">5</integer>
+</resources>