From e5d310b349b2cbcc0dab31139c92201f332695bb Mon Sep 17 00:00:00 2001 From: Brent Casavant Date: Tue, 21 Jun 2005 17:16:01 -0700 Subject: [PATCH] ioc4: CONFIG split The SGI IOC4 I/O controller chip drivers are currently all configured by CONFIG_BLK_DEV_SGIIOC4. This is undesirable as not all IOC4 hardware features are needed by all systems. This patch adds two configuration variables, CONFIG_SGI_IOC4 for core IOC4 driver support (see patch 1/3 in this series for further explanation) and CONFIG_SERIAL_SGI_IOC4 to independently enable serial port support. Signed-off-by: Brent Casavant Acked-by: Pat Gefre Acked-by: Jeremy Higdon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/Kconfig | 9 +++++++++ drivers/serial/Makefile | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers/serial') diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 6a15703f1cb9..25fcef2c42de 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -843,4 +843,13 @@ config SERIAL_JSM To compile this driver as a module, choose M here: the module will be called jsm. +config SERIAL_SGI_IOC4 + tristate "SGI IOC4 controller serial support" + depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4 + select SERIAL_CORE + help + If you have an SGI Altix with an IOC4 based Base IO card + and wish to use the serial ports on this card, say Y. + Otherwise, say N. + endmenu diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 81b77d769b84..8f1cdde7dbed 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -51,4 +51,4 @@ obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o obj-$(CONFIG_SERIAL_JSM) += jsm/ obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o -obj-$(CONFIG_BLK_DEV_SGIIOC4) += ioc4_serial.o +obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o -- cgit v1.2.3