From b2ce5617dad254230551feda3599f2cc68e53ad8 Mon Sep 17 00:00:00 2001 From: Anders Roxell Date: Wed, 12 Jun 2019 12:19:35 -0400 Subject: media: i2c: fix warning same module names When building with CONFIG_VIDEO_ADV7511 and CONFIG_DRM_I2C_ADV7511 enabled as loadable modules, we see the following warning: drivers/gpu/drm/bridge/adv7511/adv7511.ko drivers/media/i2c/adv7511.ko Rework so that the file is named adv7511-v4l2.c. Signed-off-by: Anders Roxell Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/adv7511-v4l2.c | 1997 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 1997 insertions(+) create mode 100644 drivers/media/i2c/adv7511-v4l2.c (limited to 'drivers/media/i2c/adv7511-v4l2.c') diff --git a/drivers/media/i2c/adv7511-v4l2.c b/drivers/media/i2c/adv7511-v4l2.c new file mode 100644 index 000000000000..2ad6bdf1a9fc --- /dev/null +++ b/drivers/media/i2c/adv7511-v4l2.c @@ -0,0 +1,1997 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Analog Devices ADV7511 HDMI Transmitter Device Driver + * + * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +/* + * This file is named adv7511-v4l2.c so it doesn't conflict with the Analog + * Device ADV7511 (config fragment CONFIG_DRM_I2C_ADV7511). + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "debug level (0-2)"); + +MODULE_DESCRIPTION("Analog Devices ADV7511 HDMI Transmitter Device Driver"); +MODULE_AUTHOR("Hans Verkuil"); +MODULE_LICENSE("GPL v2"); + +#define MASK_ADV7511_EDID_RDY_INT 0x04 +#define MASK_ADV7511_MSEN_INT 0x40 +#define MASK_ADV7511_HPD_INT 0x80 + +#define MASK_ADV7511_HPD_DETECT 0x40 +#define MASK_ADV7511_MSEN_DETECT 0x20 +#define MASK_ADV7511_EDID_RDY 0x10 + +#define EDID_MAX_RETRIES (8) +#define EDID_DELAY 250 +#define EDID_MAX_SEGM 8 + +#define ADV7511_MAX_WIDTH 1920 +#define ADV7511_MAX_HEIGHT 1200 +#define ADV7511_MIN_PIXELCLOCK 20000000 +#define ADV7511_MAX_PIXELCLOCK 225000000 + +#define ADV7511_MAX_ADDRS (3) + +/* +********************************************************************** +* +* Arrays with configuration parameters for the ADV7511 +* +********************************************************************** +*/ + +struct i2c_reg_value { + unsigned char reg; + unsigned char value; +}; + +struct adv7511_state_edid { + /* total number of blocks */ + u32 blocks; + /* Number of segments read */ + u32 segments; + u8 data[EDID_MAX_SEGM * 256]; + /* Number of EDID read retries left */ + unsigned read_retries; + bool complete; +}; + +struct adv7511_state { + struct adv7511_platform_data pdata; + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_ctrl_handler hdl; + int chip_revision; + u8 i2c_edid_addr; + u8 i2c_pktmem_addr; + u8 i2c_cec_addr; + + struct i2c_client *i2c_cec; + struct cec_adapter *cec_adap; + u8 cec_addr[ADV7511_MAX_ADDRS]; + u8 cec_valid_addrs; + bool cec_enabled_adap; + + /* Is the adv7511 powered on? */ + bool power_on; + /* Did we receive hotplug and rx-sense signals? */ + bool have_monitor; + bool enabled_irq; + /* timings from s_dv_timings */ + struct v4l2_dv_timings dv_timings; + u32 fmt_code; + u32 colorspace; + u32 ycbcr_enc; + u32 quantization; + u32 xfer_func; + u32 content_type; + /* controls */ + struct v4l2_ctrl *hdmi_mode_ctrl; + struct v4l2_ctrl *hotplug_ctrl; + struct v4l2_ctrl *rx_sense_ctrl; + struct v4l2_ctrl *have_edid0_ctrl; + struct v4l2_ctrl *rgb_quantization_range_ctrl; + struct v4l2_ctrl *content_type_ctrl; + struct i2c_client *i2c_edid; + struct i2c_client *i2c_pktmem; + struct adv7511_state_edid edid; + /* Running counter of the number of detected EDIDs (for debugging) */ + unsigned edid_detect_counter; + struct workqueue_struct *work_queue; + struct delayed_work edid_handler; /* work entry */ +}; + +static void adv7511_check_monitor_present_status(struct v4l2_subdev *sd); +static bool adv7511_check_edid_status(struct v4l2_subdev *sd); +static void adv7511_setup(struct v4l2_subdev *sd); +static int adv7511_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq); +static int adv7511_s_clock_freq(struct v4l2_subdev *sd, u32 freq); + + +static const struct v4l2_dv_timings_cap adv7511_timings_cap = { + .type = V4L2_DV_BT_656_1120, + /* keep this initialization for compatibility with GCC < 4.4.6 */ + .reserved = { 0 }, + V4L2_INIT_BT_TIMINGS(640, ADV7511_MAX_WIDTH, 350, ADV7511_MAX_HEIGHT, + ADV7511_MIN_PIXELCLOCK, ADV7511_MAX_PIXELCLOCK, + V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT | + V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT, + V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_REDUCED_BLANKING | + V4L2_DV_BT_CAP_CUSTOM) +}; + +static inline struct adv7511_state *get_adv7511_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct adv7511_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct adv7511_state, hdl)->sd; +} + +/* ------------------------ I2C ----------------------------------------------- */ + +static s32 adv_smbus_read_byte_data_check(struct i2c_client *client, + u8 command, bool check) +{ + union i2c_smbus_data data; + + if (!i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_BYTE_DATA, &data)) + return data.byte; + if (check) + v4l_err(client, "error reading %02x, %02x\n", + client->addr, command); + return -1; +} + +static s32 adv_smbus_read_byte_data(struct i2c_client *client, u8 command) +{ + int i; + for (i = 0; i < 3; i++) { + int ret = adv_smbus_read_byte_data_check(client, command, true); + if (ret >= 0) { + if (i) + v4l_err(client, "read ok after %d retries\n", i); + return ret; + } + } + v4l_err(client, "read failed\n"); + return -1; +} + +static int adv7511_rd(struct v4l2_subdev *sd, u8 reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return adv_smbus_read_byte_data(client, reg); +} + +static int adv7511_wr(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + int i; + + for (i = 0; i < 3; i++) { + ret = i2c_smbus_write_byte_data(client, reg, val); + if (ret == 0) + return 0; + } + v4l2_err(sd, "%s: i2c write error\n", __func__); + return ret; +} + +/* To set specific bits in the register, a clear-mask is given (to be AND-ed), + and then the value-mask (to be OR-ed). */ +static inline void adv7511_wr_and_or(struct v4l2_subdev *sd, u8 reg, u8 clr_mask, u8 val_mask) +{ + adv7511_wr(sd, reg, (adv7511_rd(sd, reg) & clr_mask) | val_mask); +} + +static int adv_smbus_read_i2c_block_data(struct i2c_client *client, + u8 command, unsigned length, u8 *values) +{ + union i2c_smbus_data data; + int ret; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + data.block[0] = length; + + ret = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_I2C_BLOCK_DATA, &data); + memcpy(values, data.block + 1, length); + return ret; +} + +static void adv7511_edid_rd(struct v4l2_subdev *sd, uint16_t len, uint8_t *buf) +{ + struct adv7511_state *state = get_adv7511_state(sd); + int i; + int err = 0; + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + for (i = 0; !err && i < len; i += I2C_SMBUS_BLOCK_MAX) + err = adv_smbus_read_i2c_block_data(state->i2c_edid, i, + I2C_SMBUS_BLOCK_MAX, buf + i); + if (err) + v4l2_err(sd, "%s: i2c read error\n", __func__); +} + +static inline int adv7511_cec_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + return i2c_smbus_read_byte_data(state->i2c_cec, reg); +} + +static int adv7511_cec_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7511_state *state = get_adv7511_state(sd); + int ret; + int i; + + for (i = 0; i < 3; i++) { + ret = i2c_smbus_write_byte_data(state->i2c_cec, reg, val); + if (ret == 0) + return 0; + } + v4l2_err(sd, "%s: I2C Write Problem\n", __func__); + return ret; +} + +static inline int adv7511_cec_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, + u8 val) +{ + return adv7511_cec_write(sd, reg, (adv7511_cec_read(sd, reg) & mask) | val); +} + +static int adv7511_pktmem_rd(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + return adv_smbus_read_byte_data(state->i2c_pktmem, reg); +} + +static int adv7511_pktmem_wr(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7511_state *state = get_adv7511_state(sd); + int ret; + int i; + + for (i = 0; i < 3; i++) { + ret = i2c_smbus_write_byte_data(state->i2c_pktmem, reg, val); + if (ret == 0) + return 0; + } + v4l2_err(sd, "%s: i2c write error\n", __func__); + return ret; +} + +/* To set specific bits in the register, a clear-mask is given (to be AND-ed), + and then the value-mask (to be OR-ed). */ +static inline void adv7511_pktmem_wr_and_or(struct v4l2_subdev *sd, u8 reg, u8 clr_mask, u8 val_mask) +{ + adv7511_pktmem_wr(sd, reg, (adv7511_pktmem_rd(sd, reg) & clr_mask) | val_mask); +} + +static inline bool adv7511_have_hotplug(struct v4l2_subdev *sd) +{ + return adv7511_rd(sd, 0x42) & MASK_ADV7511_HPD_DETECT; +} + +static inline bool adv7511_have_rx_sense(struct v4l2_subdev *sd) +{ + return adv7511_rd(sd, 0x42) & MASK_ADV7511_MSEN_DETECT; +} + +static void adv7511_csc_conversion_mode(struct v4l2_subdev *sd, u8 mode) +{ + adv7511_wr_and_or(sd, 0x18, 0x9f, (mode & 0x3)<<5); +} + +static void adv7511_csc_coeff(struct v4l2_subdev *sd, + u16 A1, u16 A2, u16 A3, u16 A4, + u16 B1, u16 B2, u16 B3, u16 B4, + u16 C1, u16 C2, u16 C3, u16 C4) +{ + /* A */ + adv7511_wr_and_or(sd, 0x18, 0xe0, A1>>8); + adv7511_wr(sd, 0x19, A1); + adv7511_wr_and_or(sd, 0x1A, 0xe0, A2>>8); + adv7511_wr(sd, 0x1B, A2); + adv7511_wr_and_or(sd, 0x1c, 0xe0, A3>>8); + adv7511_wr(sd, 0x1d, A3); + adv7511_wr_and_or(sd, 0x1e, 0xe0, A4>>8); + adv7511_wr(sd, 0x1f, A4); + + /* B */ + adv7511_wr_and_or(sd, 0x20, 0xe0, B1>>8); + adv7511_wr(sd, 0x21, B1); + adv7511_wr_and_or(sd, 0x22, 0xe0, B2>>8); + adv7511_wr(sd, 0x23, B2); + adv7511_wr_and_or(sd, 0x24, 0xe0, B3>>8); + adv7511_wr(sd, 0x25, B3); + adv7511_wr_and_or(sd, 0x26, 0xe0, B4>>8); + adv7511_wr(sd, 0x27, B4); + + /* C */ + adv7511_wr_and_or(sd, 0x28, 0xe0, C1>>8); + adv7511_wr(sd, 0x29, C1); + adv7511_wr_and_or(sd, 0x2A, 0xe0, C2>>8); + adv7511_wr(sd, 0x2B, C2); + adv7511_wr_and_or(sd, 0x2C, 0xe0, C3>>8); + adv7511_wr(sd, 0x2D, C3); + adv7511_wr_and_or(sd, 0x2E, 0xe0, C4>>8); + adv7511_wr(sd, 0x2F, C4); +} + +static void adv7511_csc_rgb_full2limit(struct v4l2_subdev *sd, bool enable) +{ + if (enable) { + u8 csc_mode = 0; + adv7511_csc_conversion_mode(sd, csc_mode); + adv7511_csc_coeff(sd, + 4096-564, 0, 0, 256, + 0, 4096-564, 0, 256, + 0, 0, 4096-564, 256); + /* enable CSC */ + adv7511_wr_and_or(sd, 0x18, 0x7f, 0x80); + /* AVI infoframe: Limited range RGB (16-235) */ + adv7511_wr_and_or(sd, 0x57, 0xf3, 0x04); + } else { + /* disable CSC */ + adv7511_wr_and_or(sd, 0x18, 0x7f, 0x0); + /* AVI infoframe: Full range RGB (0-255) */ + adv7511_wr_and_or(sd, 0x57, 0xf3, 0x08); + } +} + +static void adv7511_set_rgb_quantization_mode(struct v4l2_subdev *sd, struct v4l2_ctrl *ctrl) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + /* Only makes sense for RGB formats */ + if (state->fmt_code != MEDIA_BUS_FMT_RGB888_1X24) { + /* so just keep quantization */ + adv7511_csc_rgb_full2limit(sd, false); + return; + } + + switch (ctrl->val) { + case V4L2_DV_RGB_RANGE_AUTO: + /* automatic */ + if (state->dv_timings.bt.flags & V4L2_DV_FL_IS_CE_VIDEO) { + /* CE format, RGB limited range (16-235) */ + adv7511_csc_rgb_full2limit(sd, true); + } else { + /* not CE format, RGB full range (0-255) */ + adv7511_csc_rgb_full2limit(sd, false); + } + break; + case V4L2_DV_RGB_RANGE_LIMITED: + /* RGB limited range (16-235) */ + adv7511_csc_rgb_full2limit(sd, true); + break; + case V4L2_DV_RGB_RANGE_FULL: + /* RGB full range (0-255) */ + adv7511_csc_rgb_full2limit(sd, false); + break; + } +} + +/* ------------------------------ CTRL OPS ------------------------------ */ + +static int adv7511_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct adv7511_state *state = get_adv7511_state(sd); + + v4l2_dbg(1, debug, sd, "%s: ctrl id: %d, ctrl->val %d\n", __func__, ctrl->id, ctrl->val); + + if (state->hdmi_mode_ctrl == ctrl) { + /* Set HDMI or DVI-D */ + adv7511_wr_and_or(sd, 0xaf, 0xfd, ctrl->val == V4L2_DV_TX_MODE_HDMI ? 0x02 : 0x00); + return 0; + } + if (state->rgb_quantization_range_ctrl == ctrl) { + adv7511_set_rgb_quantization_mode(sd, ctrl); + return 0; + } + if (state->content_type_ctrl == ctrl) { + u8 itc, cn; + + state->content_type = ctrl->val; + itc = state->content_type != V4L2_DV_IT_CONTENT_TYPE_NO_ITC; + cn = itc ? state->content_type : V4L2_DV_IT_CONTENT_TYPE_GRAPHICS; + adv7511_wr_and_or(sd, 0x57, 0x7f, itc << 7); + adv7511_wr_and_or(sd, 0x59, 0xcf, cn << 4); + return 0; + } + + return -EINVAL; +} + +static const struct v4l2_ctrl_ops adv7511_ctrl_ops = { + .s_ctrl = adv7511_s_ctrl, +}; + +/* ---------------------------- CORE OPS ------------------------------------------- */ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static void adv7511_inv_register(struct v4l2_subdev *sd) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + v4l2_info(sd, "0x000-0x0ff: Main Map\n"); + if (state->i2c_cec) + v4l2_info(sd, "0x100-0x1ff: CEC Map\n"); +} + +static int adv7511_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + reg->size = 1; + switch (reg->reg >> 8) { + case 0: + reg->val = adv7511_rd(sd, reg->reg & 0xff); + break; + case 1: + if (state->i2c_cec) { + reg->val = adv7511_cec_read(sd, reg->reg & 0xff); + break; + } + /* fall through */ + default: + v4l2_info(sd, "Register %03llx not supported\n", reg->reg); + adv7511_inv_register(sd); + break; + } + return 0; +} + +static int adv7511_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + switch (reg->reg >> 8) { + case 0: + adv7511_wr(sd, reg->reg & 0xff, reg->val & 0xff); + break; + case 1: + if (state->i2c_cec) { + adv7511_cec_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + } + /* fall through */ + default: + v4l2_info(sd, "Register %03llx not supported\n", reg->reg); + adv7511_inv_register(sd); + break; + } + return 0; +} +#endif + +struct adv7511_cfg_read_infoframe { + const char *desc; + u8 present_reg; + u8 present_mask; + u8 header[3]; + u16 payload_addr; +}; + +static u8 hdmi_infoframe_checksum(u8 *ptr, size_t size) +{ + u8 csum = 0; + size_t i; + + /* compute checksum */ + for (i = 0; i < size; i++) + csum += ptr[i]; + + return 256 - csum; +} + +static void log_infoframe(struct v4l2_subdev *sd, const struct adv7511_cfg_read_infoframe *cri) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct device *dev = &client->dev; + union hdmi_infoframe frame; + u8 buffer[32]; + u8 len; + int i; + + if (!(adv7511_rd(sd, cri->present_reg) & cri->present_mask)) { + v4l2_info(sd, "%s infoframe not transmitted\n", cri->desc); + return; + } + + memcpy(buffer, cri->header, sizeof(cri->header)); + + len = buffer[2]; + + if (len + 4 > sizeof(buffer)) { + v4l2_err(sd, "%s: invalid %s infoframe length %d\n", __func__, cri->desc, len); + return; + } + + if (cri->payload_addr >= 0x100) { + for (i = 0; i < len; i++) + buffer[i + 4] = adv7511_pktmem_rd(sd, cri->payload_addr + i - 0x100); + } else { + for (i = 0; i < len; i++) + buffer[i + 4] = adv7511_rd(sd, cri->payload_addr + i); + } + buffer[3] = 0; + buffer[3] = hdmi_infoframe_checksum(buffer, len + 4); + + if (hdmi_infoframe_unpack(&frame, buffer, sizeof(buffer)) < 0) { + v4l2_err(sd, "%s: unpack of %s infoframe failed\n", __func__, cri->desc); + return; + } + + hdmi_infoframe_log(KERN_INFO, dev, &frame); +} + +static void adv7511_log_infoframes(struct v4l2_subdev *sd) +{ + static const struct adv7511_cfg_read_infoframe cri[] = { + { "AVI", 0x44, 0x10, { 0x82, 2, 13 }, 0x55 }, + { "Audio", 0x44, 0x08, { 0x84, 1, 10 }, 0x73 }, + { "SDP", 0x40, 0x40, { 0x83, 1, 25 }, 0x103 }, + }; + int i; + + for (i = 0; i < ARRAY_SIZE(cri); i++) + log_infoframe(sd, &cri[i]); +} + +static int adv7511_log_status(struct v4l2_subdev *sd) +{ + struct adv7511_state *state = get_adv7511_state(sd); + struct adv7511_state_edid *edid = &state->edid; + int i; + + static const char * const states[] = { + "in reset", + "reading EDID", + "idle", + "initializing HDCP", + "HDCP enabled", + "initializing HDCP repeater", + "6", "7", "8", "9", "A", "B", "C", "D", "E", "F" + }; + static const char * const errors[] = { + "no error", + "bad receiver BKSV", + "Ri mismatch", + "Pj mismatch", + "i2c error", + "timed out", + "max repeater cascade exceeded", + "hash check failed", + "too many devices", + "9", "A", "B", "C", "D", "E", "F" + }; + + v4l2_info(sd, "power %s\n", state->power_on ? "on" : "off"); + v4l2_info(sd, "%s hotplug, %s Rx Sense, %s EDID (%d block(s))\n", + (adv7511_rd(sd, 0x42) & MASK_ADV7511_HPD_DETECT) ? "detected" : "no", + (adv7511_rd(sd, 0x42) & MASK_ADV7511_MSEN_DETECT) ? "detected" : "no", + edid->segments ? "found" : "no", + edid->blocks); + v4l2_info(sd, "%s output %s\n", + (adv7511_rd(sd, 0xaf) & 0x02) ? + "HDMI" : "DVI-D", + (adv7511_rd(sd, 0xa1) & 0x3c) ? + "disabled" : "enabled"); + v4l2_info(sd, "state: %s, error: %s, detect count: %u, msk/irq: %02x/%02x\n", + states[adv7511_rd(sd, 0xc8) & 0xf], + errors[adv7511_rd(sd, 0xc8) >> 4], state->edid_detect_counter, + adv7511_rd(sd, 0x94), adv7511_rd(sd, 0x96)); + v4l2_info(sd, "RGB quantization: %s range\n", adv7511_rd(sd, 0x18) & 0x80 ? "limited" : "full"); + if (adv7511_rd(sd, 0xaf) & 0x02) { + /* HDMI only */ + u8 manual_cts = adv7511_rd(sd, 0x0a) & 0x80; + u32 N = (adv7511_rd(sd, 0x01) & 0xf) << 16 | + adv7511_rd(sd, 0x02) << 8 | + adv7511_rd(sd, 0x03); + u8 vic_detect = adv7511_rd(sd, 0x3e) >> 2; + u8 vic_sent = adv7511_rd(sd, 0x3d) & 0x3f; + u32 CTS; + + if (manual_cts) + CTS = (adv7511_rd(sd, 0x07) & 0xf) << 16 | + adv7511_rd(sd, 0x08) << 8 | + adv7511_rd(sd, 0x09); + else + CTS = (adv7511_rd(sd, 0x04) & 0xf) << 16 | + adv7511_rd(sd, 0x05) << 8 | + adv7511_rd(sd, 0x06); + v4l2_info(sd, "CTS %s mode: N %d, CTS %d\n", + manual_cts ? "manual" : "automatic", N, CTS); + v4l2_info(sd, "VIC: detected %d, sent %d\n", + vic_detect, vic_sent); + adv7511_log_infoframes(sd); + } + if (state->dv_timings.type == V4L2_DV_BT_656_1120) + v4l2_print_dv_timings(sd->name, "timings: ", + &state->dv_timings, false); + else + v4l2_info(sd, "no timings set\n"); + v4l2_info(sd, "i2c edid addr: 0x%x\n", state->i2c_edid_addr); + + if (state->i2c_cec == NULL) + return 0; + + v4l2_info(sd, "i2c cec addr: 0x%x\n", state->i2c_cec_addr); + + v4l2_info(sd, "CEC: %s\n", state->cec_enabled_adap ? + "enabled" : "disabled"); + if (state->cec_enabled_adap) { + for (i = 0; i < ADV7511_MAX_ADDRS; i++) { + bool is_valid = state->cec_valid_addrs & (1 << i); + + if (is_valid) + v4l2_info(sd, "CEC Logical Address: 0x%x\n", + state->cec_addr[i]); + } + } + v4l2_info(sd, "i2c pktmem addr: 0x%x\n", state->i2c_pktmem_addr); + return 0; +} + +/* Power up/down adv7511 */ +static int adv7511_s_power(struct v4l2_subdev *sd, int on) +{ + struct adv7511_state *state = get_adv7511_state(sd); + const int retries = 20; + int i; + + v4l2_dbg(1, debug, sd, "%s: power %s\n", __func__, on ? "on" : "off"); + + state->power_on = on; + + if (!on) { + /* Power down */ + adv7511_wr_and_or(sd, 0x41, 0xbf, 0x40); + return true; + } + + /* Power up */ + /* The adv7511 does not always come up immediately. + Retry multiple times. */ + for (i = 0; i < retries; i++) { + adv7511_wr_and_or(sd, 0x41, 0xbf, 0x0); + if ((adv7511_rd(sd, 0x41) & 0x40) == 0) + break; + adv7511_wr_and_or(sd, 0x41, 0xbf, 0x40); + msleep(10); + } + if (i == retries) { + v4l2_dbg(1, debug, sd, "%s: failed to powerup the adv7511!\n", __func__); + adv7511_s_power(sd, 0); + return false; + } + if (i > 1) + v4l2_dbg(1, debug, sd, "%s: needed %d retries to powerup the adv7511\n", __func__, i); + + /* Reserved registers that must be set */ + adv7511_wr(sd, 0x98, 0x03); + adv7511_wr_and_or(sd, 0x9a, 0xfe, 0x70); + adv7511_wr(sd, 0x9c, 0x30); + adv7511_wr_and_or(sd, 0x9d, 0xfc, 0x01); + adv7511_wr(sd, 0xa2, 0xa4); + adv7511_wr(sd, 0xa3, 0xa4); + adv7511_wr(sd, 0xe0, 0xd0); + adv7511_wr(sd, 0xf9, 0x00); + + adv7511_wr(sd, 0x43, state->i2c_edid_addr); + adv7511_wr(sd, 0x45, state->i2c_pktmem_addr); + + /* Set number of attempts to read the EDID */ + adv7511_wr(sd, 0xc9, 0xf); + return true; +} + +#if IS_ENABLED(CONFIG_VIDEO_ADV7511_CEC) +static int adv7511_cec_adap_enable(struct cec_adapter *adap, bool enable) +{ + struct adv7511_state *state = cec_get_drvdata(adap); + struct v4l2_subdev *sd = &state->sd; + + if (state->i2c_cec == NULL) + return -EIO; + + if (!state->cec_enabled_adap && enable) { + /* power up cec section */ + adv7511_cec_write_and_or(sd, 0x4e, 0xfc, 0x01); + /* legacy mode and clear all rx buffers */ + adv7511_cec_write(sd, 0x4a, 0x00); + adv7511_cec_write(sd, 0x4a, 0x07); + adv7511_cec_write_and_or(sd, 0x11, 0xfe, 0); /* initially disable tx */ + /* enabled irqs: */ + /* tx: ready */ + /* tx: arbitration lost */ + /* tx: retry timeout */ + /* rx: ready 1 */ + if (state->enabled_irq) + adv7511_wr_and_or(sd, 0x95, 0xc0, 0x39); + } else if (state->cec_enabled_adap && !enable) { + if (state->enabled_irq) + adv7511_wr_and_or(sd, 0x95, 0xc0, 0x00); + /* disable address mask 1-3 */ + adv7511_cec_write_and_or(sd, 0x4b, 0x8f, 0x00); + /* power down cec section */ + adv7511_cec_write_and_or(sd, 0x4e, 0xfc, 0x00); + state->cec_valid_addrs = 0; + } + state->cec_enabled_adap = enable; + return 0; +} + +static int adv7511_cec_adap_log_addr(struct cec_adapter *adap, u8 addr) +{ + struct adv7511_state *state = cec_get_drvdata(adap); + struct v4l2_subdev *sd = &state->sd; + unsigned int i, free_idx = ADV7511_MAX_ADDRS; + + if (!state->cec_enabled_adap) + return addr == CEC_LOG_ADDR_INVALID ? 0 : -EIO; + + if (addr == CEC_LOG_ADDR_INVALID) { + adv7511_cec_write_and_or(sd, 0x4b, 0x8f, 0); + state->cec_valid_addrs = 0; + return 0; + } + + for (i = 0; i < ADV7511_MAX_ADDRS; i++) { + bool is_valid = state->cec_valid_addrs & (1 << i); + + if (free_idx == ADV7511_MAX_ADDRS && !is_valid) + free_idx = i; + if (is_valid && state->cec_addr[i] == addr) + return 0; + } + if (i == ADV7511_MAX_ADDRS) { + i = free_idx; + if (i == ADV7511_MAX_ADDRS) + return -ENXIO; + } + state->cec_addr[i] = addr; + state->cec_valid_addrs |= 1 << i; + + switch (i) { + case 0: + /* enable address mask 0 */ + adv7511_cec_write_and_or(sd, 0x4b, 0xef, 0x10); + /* set address for mask 0 */ + adv7511_cec_write_and_or(sd, 0x4c, 0xf0, addr); + break; + case 1: + /* enable address mask 1 */ + adv7511_cec_write_and_or(sd, 0x4b, 0xdf, 0x20); + /* set address for mask 1 */ + adv7511_cec_write_and_or(sd, 0x4c, 0x0f, addr << 4); + break; + case 2: + /* enable address mask 2 */ + adv7511_cec_write_and_or(sd, 0x4b, 0xbf, 0x40); + /* set address for mask 1 */ + adv7511_cec_write_and_or(sd, 0x4d, 0xf0, addr); + break; + } + return 0; +} + +static int adv7511_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, + u32 signal_free_time, struct cec_msg *msg) +{ + struct adv7511_state *state = cec_get_drvdata(adap); + struct v4l2_subdev *sd = &state->sd; + u8 len = msg->len; + unsigned int i; + + v4l2_dbg(1, debug, sd, "%s: len %d\n", __func__, len); + + if (len > 16) { + v4l2_err(sd, "%s: len exceeded 16 (%d)\n", __func__, len); + return -EINVAL; + } + + /* + * The number of retries is the number of attempts - 1, but retry + * at least once. It's not clear if a value of 0 is allowed, so + * let's do at least one retry. + */ + adv7511_cec_write_and_or(sd, 0x12, ~0x70, max(1, attempts - 1) << 4); + + /* clear cec tx irq status */ + adv7511_wr(sd, 0x97, 0x38); + + /* write data */ + for (i = 0; i < len; i++) + adv7511_cec_write(sd, i, msg->msg[i]); + + /* set length (data + header) */ + adv7511_cec_write(sd, 0x10, len); + /* start transmit, enable tx */ + adv7511_cec_write(sd, 0x11, 0x01); + return 0; +} + +static void adv_cec_tx_raw_status(struct v4l2_subdev *sd, u8 tx_raw_status) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + if ((adv7511_cec_read(sd, 0x11) & 0x01) == 0) { + v4l2_dbg(1, debug, sd, "%s: tx raw: tx disabled\n", __func__); + return; + } + + if (tx_raw_status & 0x10) { + v4l2_dbg(1, debug, sd, + "%s: tx raw: arbitration lost\n", __func__); + cec_transmit_done(state->cec_adap, CEC_TX_STATUS_ARB_LOST, + 1, 0, 0, 0); + return; + } + if (tx_raw_status & 0x08) { + u8 status; + u8 nack_cnt; + u8 low_drive_cnt; + + v4l2_dbg(1, debug, sd, "%s: tx raw: retry failed\n", __func__); + /* + * We set this status bit since this hardware performs + * retransmissions. + */ + status = CEC_TX_STATUS_MAX_RETRIES; + nack_cnt = adv7511_cec_read(sd, 0x14) & 0xf; + if (nack_cnt) + status |= CEC_TX_STATUS_NACK; + low_drive_cnt = adv7511_cec_read(sd, 0x14) >> 4; + if (low_drive_cnt) + status |= CEC_TX_STATUS_LOW_DRIVE; + cec_transmit_done(state->cec_adap, status, + 0, nack_cnt, low_drive_cnt, 0); + return; + } + if (tx_raw_status & 0x20) { + v4l2_dbg(1, debug, sd, "%s: tx raw: ready ok\n", __func__); + cec_transmit_done(state->cec_adap, CEC_TX_STATUS_OK, 0, 0, 0, 0); + return; + } +} + +static const struct cec_adap_ops adv7511_cec_adap_ops = { + .adap_enable = adv7511_cec_adap_enable, + .adap_log_addr = adv7511_cec_adap_log_addr, + .adap_transmit = adv7511_cec_adap_transmit, +}; +#endif + +/* Enable interrupts */ +static void adv7511_set_isr(struct v4l2_subdev *sd, bool enable) +{ + struct adv7511_state *state = get_adv7511_state(sd); + u8 irqs = MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT; + u8 irqs_rd; + int retries = 100; + + v4l2_dbg(2, debug, sd, "%s: %s\n", __func__, enable ? "enable" : "disable"); + + if (state->enabled_irq == enable) + return; + state->enabled_irq = enable; + + /* The datasheet says that the EDID ready interrupt should be + disabled if there is no hotplug. */ + if (!enable) + irqs = 0; + else if (adv7511_have_hotplug(sd)) + irqs |= MASK_ADV7511_EDID_RDY_INT; + + /* + * This i2c write can fail (approx. 1 in 1000 writes). But it + * is essential that this register is correct, so retry it + * multiple times. + * + * Note that the i2c write does not report an error, but the readback + * clearly shows the wrong value. + */ + do { + adv7511_wr(sd, 0x94, irqs); + irqs_rd = adv7511_rd(sd, 0x94); + } while (retries-- && irqs_rd != irqs); + + if (irqs_rd != irqs) + v4l2_err(sd, "Could not set interrupts: hw failure?\n"); + + adv7511_wr_and_or(sd, 0x95, 0xc0, + (state->cec_enabled_adap && enable) ? 0x39 : 0x00); +} + +/* Interrupt handler */ +static int adv7511_isr(struct v4l2_subdev *sd, u32 status, bool *handled) +{ + u8 irq_status; + u8 cec_irq; + + /* disable interrupts to prevent a race condition */ + adv7511_set_isr(sd, false); + irq_status = adv7511_rd(sd, 0x96); + cec_irq = adv7511_rd(sd, 0x97); + /* clear detected interrupts */ + adv7511_wr(sd, 0x96, irq_status); + adv7511_wr(sd, 0x97, cec_irq); + + v4l2_dbg(1, debug, sd, "%s: irq 0x%x, cec-irq 0x%x\n", __func__, + irq_status, cec_irq); + + if (irq_status & (MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT)) + adv7511_check_monitor_present_status(sd); + if (irq_status & MASK_ADV7511_EDID_RDY_INT) + adv7511_check_edid_status(sd); + +#if IS_ENABLED(CONFIG_VIDEO_ADV7511_CEC) + if (cec_irq & 0x38) + adv_cec_tx_raw_status(sd, cec_irq); + + if (cec_irq & 1) { + struct adv7511_state *state = get_adv7511_state(sd); + struct cec_msg msg; + + msg.len = adv7511_cec_read(sd, 0x25) & 0x1f; + + v4l2_dbg(1, debug, sd, "%s: cec msg len %d\n", __func__, + msg.len); + + if (msg.len > 16) + msg.len = 16; + + if (msg.len) { + u8 i; + + for (i = 0; i < msg.len; i++) + msg.msg[i] = adv7511_cec_read(sd, i + 0x15); + + adv7511_cec_write(sd, 0x4a, 0); /* toggle to re-enable rx 1 */ + adv7511_cec_write(sd, 0x4a, 1); + cec_received_msg(state->cec_adap, &msg); + } + } +#endif + + /* enable interrupts */ + adv7511_set_isr(sd, true); + + if (handled) + *handled = true; + return 0; +} + +static const struct v4l2_subdev_core_ops adv7511_core_ops = { + .log_status = adv7511_log_status, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = adv7511_g_register, + .s_register = adv7511_s_register, +#endif + .s_power = adv7511_s_power, + .interrupt_service_routine = adv7511_isr, +}; + +/* ------------------------------ VIDEO OPS ------------------------------ */ + +/* Enable/disable adv7511 output */ +static int adv7511_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis")); + adv7511_wr_and_or(sd, 0xa1, ~0x3c, (enable ? 0 : 0x3c)); + if (enable) { + adv7511_check_monitor_present_status(sd); + } else { + adv7511_s_power(sd, 0); + state->have_monitor = false; + } + return 0; +} + +static int adv7511_s_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct adv7511_state *state = get_adv7511_state(sd); + struct v4l2_bt_timings *bt = &timings->bt; + u32 fps; + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + /* quick sanity check */ + if (!v4l2_valid_dv_timings(timings, &adv7511_timings_cap, NULL, NULL)) + return -EINVAL; + + /* Fill the optional fields .standards and .flags in struct v4l2_dv_timings + if the format is one of the CEA or DMT timings. */ + v4l2_find_dv_timings_cap(timings, &adv7511_timings_cap, 0, NULL, NULL); + + /* save timings */ + state->dv_timings = *timings; + + /* set h/vsync polarities */ + adv7511_wr_and_or(sd, 0x17, 0x9f, + ((bt->polarities & V4L2_DV_VSYNC_POS_POL) ? 0 : 0x40) | + ((bt->polarities & V4L2_DV_HSYNC_POS_POL) ? 0 : 0x20)); + + fps = (u32)bt->pixelclock / (V4L2_DV_BT_FRAME_WIDTH(bt) * V4L2_DV_BT_FRAME_HEIGHT(bt)); + switch (fps) { + case 24: + adv7511_wr_and_or(sd, 0xfb, 0xf9, 1 << 1); + break; + case 25: + adv7511_wr_and_or(sd, 0xfb, 0xf9, 2 << 1); + break; + case 30: + adv7511_wr_and_or(sd, 0xfb, 0xf9, 3 << 1); + break; + default: + adv7511_wr_and_or(sd, 0xfb, 0xf9, 0); + break; + } + + /* update quantization range based on new dv_timings */ + adv7511_set_rgb_quantization_mode(sd, state->rgb_quantization_range_ctrl); + + return 0; +} + +static int adv7511_g_dv_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + if (!timings) + return -EINVAL; + + *timings = state->dv_timings; + + return 0; +} + +static int adv7511_enum_dv_timings(struct v4l2_subdev *sd, + struct v4l2_enum_dv_timings *timings) +{ + if (timings->pad != 0) + return -EINVAL; + + return v4l2_enum_dv_timings_cap(timings, &adv7511_timings_cap, NULL, NULL); +} + +static int adv7511_dv_timings_cap(struct v4l2_subdev *sd, + struct v4l2_dv_timings_cap *cap) +{ + if (cap->pad != 0) + return -EINVAL; + + *cap = adv7511_timings_cap; + return 0; +} + +static const struct v4l2_subdev_video_ops adv7511_video_ops = { + .s_stream = adv7511_s_stream, + .s_dv_timings = adv7511_s_dv_timings, + .g_dv_timings = adv7511_g_dv_timings, +}; + +/* ------------------------------ AUDIO OPS ------------------------------ */ +static int adv7511_s_audio_stream(struct v4l2_subdev *sd, int enable) +{ + v4l2_dbg(1, debug, sd, "%s: %sable\n", __func__, (enable ? "en" : "dis")); + + if (enable) + adv7511_wr_and_or(sd, 0x4b, 0x3f, 0x80); + else + adv7511_wr_and_or(sd, 0x4b, 0x3f, 0x40); + + return 0; +} + +static int adv7511_s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + u32 N; + + switch (freq) { + case 32000: N = 4096; break; + case 44100: N = 6272; break; + case 48000: N = 6144; break; + case 88200: N = 12544; break; + case 96000: N = 12288; break; + case 176400: N = 25088; break; + case 192000: N = 24576; break; + default: + return -EINVAL; + } + + /* Set N (used with CTS to regenerate the audio clock) */ + adv7511_wr(sd, 0x01, (N >> 16) & 0xf); + adv7511_wr(sd, 0x02, (N >> 8) & 0xff); + adv7511_wr(sd, 0x03, N & 0xff); + + return 0; +} + +static int adv7511_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + u32 i2s_sf; + + switch (freq) { + case 32000: i2s_sf = 0x30; break; + case 44100: i2s_sf = 0x00; break; + case 48000: i2s_sf = 0x20; break; + case 88200: i2s_sf = 0x80; break; + case 96000: i2s_sf = 0xa0; break; + case 176400: i2s_sf = 0xc0; break; + case 192000: i2s_sf = 0xe0; break; + default: + return -EINVAL; + } + + /* Set sampling frequency for I2S audio to 48 kHz */ + adv7511_wr_and_or(sd, 0x15, 0xf, i2s_sf); + + return 0; +} + +static int adv7511_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config) +{ + /* Only 2 channels in use for application */ + adv7511_wr_and_or(sd, 0x73, 0xf8, 0x1); + /* Speaker mapping */ + adv7511_wr(sd, 0x76, 0x00); + + /* 16 bit audio word length */ + adv7511_wr_and_or(sd, 0x14, 0xf0, 0x02); + + return 0; +} + +static const struct v4l2_subdev_audio_ops adv7511_audio_ops = { + .s_stream = adv7511_s_audio_stream, + .s_clock_freq = adv7511_s_clock_freq, + .s_i2s_clock_freq = adv7511_s_i2s_clock_freq, + .s_routing = adv7511_s_routing, +}; + +/* ---------------------------- PAD OPS ------------------------------------- */ + +static int adv7511_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + memset(edid->reserved, 0, sizeof(edid->reserved)); + + if (edid->pad != 0) + return -EINVAL; + + if (edid->start_block == 0 && edid->blocks == 0) { + edid->blocks = state->edid.segments * 2; + return 0; + } + + if (state->edid.segments == 0) + return -ENODATA; + + if (edid->start_block >= state->edid.segments * 2) + return -EINVAL; + + if (edid->start_block + edid->blocks > state->edid.segments * 2) + edid->blocks = state->edid.segments * 2 - edid->start_block; + + memcpy(edid->edid, &state->edid.data[edid->start_block * 128], + 128 * edid->blocks); + + return 0; +} + +static int adv7511_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->pad != 0) + return -EINVAL; + + switch (code->index) { + case 0: + code->code = MEDIA_BUS_FMT_RGB888_1X24; + break; + case 1: + code->code = MEDIA_BUS_FMT_YUYV8_1X16; + break; + case 2: + code->code = MEDIA_BUS_FMT_UYVY8_1X16; + break; + default: + return -EINVAL; + } + return 0; +} + +static void adv7511_fill_format(struct adv7511_state *state, + struct v4l2_mbus_framefmt *format) +{ + format->width = state->dv_timings.bt.width; + format->height = state->dv_timings.bt.height; + format->field = V4L2_FIELD_NONE; +} + +static int adv7511_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + if (format->pad != 0) + return -EINVAL; + + memset(&format->format, 0, sizeof(format->format)); + adv7511_fill_format(state, &format->format); + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) { + struct v4l2_mbus_framefmt *fmt; + + fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad); + format->format.code = fmt->code; + format->format.colorspace = fmt->colorspace; + format->format.ycbcr_enc = fmt->ycbcr_enc; + format->format.quantization = fmt->quantization; + format->format.xfer_func = fmt->xfer_func; + } else { + format->format.code = state->fmt_code; + format->format.colorspace = state->colorspace; + format->format.ycbcr_enc = state->ycbcr_enc; + format->format.quantization = state->quantization; + format->format.xfer_func = state->xfer_func; + } + + return 0; +} + +static int adv7511_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) +{ + struct adv7511_state *state = get_adv7511_state(sd); + /* + * Bitfield namings come the CEA-861-F standard, table 8 "Auxiliary + * Video Information (AVI) InfoFrame Format" + * + * c = Colorimetry + * ec = Extended Colorimetry + * y = RGB or YCbCr + * q = RGB Quantization Range + * yq = YCC Quantization Range + */ + u8 c = HDMI_COLORIMETRY_NONE; + u8 ec = HDMI_EXTENDED_COLORIMETRY_XV_YCC_601; + u8 y = HDMI_COLORSPACE_RGB; + u8 q = HDMI_QUANTIZATION_RANGE_DEFAULT; + u8 yq = HDMI_YCC_QUANTIZATION_RANGE_LIMITED; + u8 itc = state->content_type != V4L2_DV_IT_CONTENT_TYPE_NO_ITC; + u8 cn = itc ? state->content_type : V4L2_DV_IT_CONTENT_TYPE_GRAPHICS; + + if (format->pad != 0) + return -EINVAL; + switch (format->format.code) { + case MEDIA_BUS_FMT_UYVY8_1X16: + case MEDIA_BUS_FMT_YUYV8_1X16: + case MEDIA_BUS_FMT_RGB888_1X24: + break; + default: + return -EINVAL; + } + + adv7511_fill_format(state, &format->format); + if (format->which == V4L2_SUBDEV_FORMAT_TRY) { + struct v4l2_mbus_framefmt *fmt; + + fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad); + fmt->code = format->format.code; + fmt->colorspace = format->format.colorspace; + fmt->ycbcr_enc = format->format.ycbcr_enc; + fmt->quantization = format->format.quantization; + fmt->xfer_func = format->format.xfer_func; + return 0; + } + + switch (format->format.code) { + case MEDIA_BUS_FMT_UYVY8_1X16: + adv7511_wr_and_or(sd, 0x15, 0xf0, 0x01); + adv7511_wr_and_or(sd, 0x16, 0x03, 0xb8); + y = HDMI_COLORSPACE_YUV422; + break; + case MEDIA_BUS_FMT_YUYV8_1X16: + adv7511_wr_and_or(sd, 0x15, 0xf0, 0x01); + adv7511_wr_and_or(sd, 0x16, 0x03, 0xbc); + y = HDMI_COLORSPACE_YUV422; + break; + case MEDIA_BUS_FMT_RGB888_1X24: + default: + adv7511_wr_and_or(sd, 0x15, 0xf0, 0x00); + adv7511_wr_and_or(sd, 0x16, 0x03, 0x00); + break; + } + state->fmt_code = format->format.code; + state->colorspace = format->format.colorspace; + state->ycbcr_enc = format->format.ycbcr_enc; + state->quantization = format->format.quantization; + state->xfer_func = format->format.xfer_func; + + switch (format->format.colorspace) { + case V4L2_COLORSPACE_OPRGB: + c = HDMI_COLORIMETRY_EXTENDED; + ec = y ? HDMI_EXTENDED_COLORIMETRY_OPYCC_601 : + HDMI_EXTENDED_COLORIMETRY_OPRGB; + break; + case V4L2_COLORSPACE_SMPTE170M: + c = y ? HDMI_COLORIMETRY_ITU_601 : HDMI_COLORIMETRY_NONE; + if (y && format->format.ycbcr_enc == V4L2_YCBCR_ENC_XV601) { + c = HDMI_COLORIMETRY_EXTENDED; + ec = HDMI_EXTENDED_COLORIMETRY_XV_YCC_601; + } + break; + case V4L2_COLORSPACE_REC709: + c = y ? HDMI_COLORIMETRY_ITU_709 : HDMI_COLORIMETRY_NONE; + if (y && format->format.ycbcr_enc == V4L2_YCBCR_ENC_XV709) { + c = HDMI_COLORIMETRY_EXTENDED; + ec = HDMI_EXTENDED_COLORIMETRY_XV_YCC_709; + } + break; + case V4L2_COLORSPACE_SRGB: + c = y ? HDMI_COLORIMETRY_EXTENDED : HDMI_COLORIMETRY_NONE; + ec = y ? HDMI_EXTENDED_COLORIMETRY_S_YCC_601 : + HDMI_EXTENDED_COLORIMETRY_XV_YCC_601; + break; + case V4L2_COLORSPACE_BT2020: + c = HDMI_COLORIMETRY_EXTENDED; + if (y && format->format.ycbcr_enc == V4L2_YCBCR_ENC_BT2020_CONST_LUM) + ec = 5; /* Not yet available in hdmi.h */ + else + ec = 6; /* Not yet available in hdmi.h */ + break; + default: + break; + } + + /* + * CEA-861-F says that for RGB formats the YCC range must match the + * RGB range, although sources should ignore the YCC range. + * + * The RGB quantization range shouldn't be non-zero if the EDID doesn't + * have the Q bit set in the Video Capabilities Data Block, however this + * isn't checked at the moment. The assumption is that the application + * knows the EDID and can detect this. + * + * The same is true for the YCC quantization range: non-standard YCC + * quantization ranges should only be sent if the EDID has the YQ bit + * set in the Video Capabilities Data Block. + */ + switch (format->format.quantization) { + case V4L2_QUANTIZATION_FULL_RANGE: + q = y ? HDMI_QUANTIZATION_RANGE_DEFAULT : + HDMI_QUANTIZATION_RANGE_FULL; + yq = q ? q - 1 : HDMI_YCC_QUANTIZATION_RANGE_FULL; + break; + case V4L2_QUANTIZATION_LIM_RANGE: + q = y ? HDMI_QUANTIZATION_RANGE_DEFAULT : + HDMI_QUANTIZATION_RANGE_LIMITED; + yq = q ? q - 1 : HDMI_YCC_QUANTIZATION_RANGE_LIMITED; + break; + } + + adv7511_wr_and_or(sd, 0x4a, 0xbf, 0); + adv7511_wr_and_or(sd, 0x55, 0x9f, y << 5); + adv7511_wr_and_or(sd, 0x56, 0x3f, c << 6); + adv7511_wr_and_or(sd, 0x57, 0x83, (ec << 4) | (q << 2) | (itc << 7)); + adv7511_wr_and_or(sd, 0x59, 0x0f, (yq << 6) | (cn << 4)); + adv7511_wr_and_or(sd, 0x4a, 0xff, 1); + adv7511_set_rgb_quantization_mode(sd, state->rgb_quantization_range_ctrl); + + return 0; +} + +static const struct v4l2_subdev_pad_ops adv7511_pad_ops = { + .get_edid = adv7511_get_edid, + .enum_mbus_code = adv7511_enum_mbus_code, + .get_fmt = adv7511_get_fmt, + .set_fmt = adv7511_set_fmt, + .enum_dv_timings = adv7511_enum_dv_timings, + .dv_timings_cap = adv7511_dv_timings_cap, +}; + +/* --------------------- SUBDEV OPS --------------------------------------- */ + +static const struct v4l2_subdev_ops adv7511_ops = { + .core = &adv7511_core_ops, + .pad = &adv7511_pad_ops, + .video = &adv7511_video_ops, + .audio = &adv7511_audio_ops, +}; + +/* ----------------------------------------------------------------------- */ +static void adv7511_dbg_dump_edid(int lvl, int debug, struct v4l2_subdev *sd, int segment, u8 *buf) +{ + if (debug >= lvl) { + int i, j; + v4l2_dbg(lvl, debug, sd, "edid segment %d\n", segment); + for (i = 0; i < 256; i += 16) { + u8 b[128]; + u8 *bp = b; + if (i == 128) + v4l2_dbg(lvl, debug, sd, "\n"); + for (j = i; j < i + 16; j++) { + sprintf(bp, "0x%02x, ", buf[j]); + bp += 6; + } + bp[0] = '\0'; + v4l2_dbg(lvl, debug, sd, "%s\n", b); + } + } +} + +static void adv7511_notify_no_edid(struct v4l2_subdev *sd) +{ + struct adv7511_state *state = get_adv7511_state(sd); + struct adv7511_edid_detect ed; + + /* We failed to read the EDID, so send an event for this. */ + ed.present = false; + ed.segment = adv7511_rd(sd, 0xc4); + ed.phys_addr = CEC_PHYS_ADDR_INVALID; + cec_s_phys_addr(state->cec_adap, ed.phys_addr, false); + v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed); + v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, 0x0); +} + +static void adv7511_edid_handler(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct adv7511_state *state = container_of(dwork, struct adv7511_state, edid_handler); + struct v4l2_subdev *sd = &state->sd; + + v4l2_dbg(1, debug, sd, "%s:\n", __func__); + + if (adv7511_check_edid_status(sd)) { + /* Return if we received the EDID. */ + return; + } + + if (adv7511_have_hotplug(sd)) { + /* We must retry reading the EDID several times, it is possible + * that initially the EDID couldn't be read due to i2c errors + * (DVI connectors are particularly prone to this problem). */ + if (state->edid.read_retries) { + state->edid.read_retries--; + v4l2_dbg(1, debug, sd, "%s: edid read failed\n", __func__); + state->have_monitor = false; + adv7511_s_power(sd, false); + adv7511_s_power(sd, true); + queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY); + return; + } + } + + /* We failed to read the EDID, so send an event for this. */ + adv7511_notify_no_edid(sd); + v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__); +} + +static void adv7511_audio_setup(struct v4l2_subdev *sd) +{ + v4l2_dbg(1, debug, sd, "%s\n", __func__); + + adv7511_s_i2s_clock_freq(sd, 48000); + adv7511_s_clock_freq(sd, 48000); + adv7511_s_routing(sd, 0, 0, 0); +} + +/* Configure hdmi transmitter. */ +static void adv7511_setup(struct v4l2_subdev *sd) +{ + struct adv7511_state *state = get_adv7511_state(sd); + v4l2_dbg(1, debug, sd, "%s\n", __func__); + + /* Input format: RGB 4:4:4 */ + adv7511_wr_and_or(sd, 0x15, 0xf0, 0x0); + /* Output format: RGB 4:4:4 */ + adv7511_wr_and_or(sd, 0x16, 0x7f, 0x0); + /* 1st order interpolation 4:2:2 -> 4:4:4 up conversion, Aspect ratio: 16:9 */ + adv7511_wr_and_or(sd, 0x17, 0xf9, 0x06); + /* Disable pixel repetition */ + adv7511_wr_and_or(sd, 0x3b, 0x9f, 0x0); + /* Disable CSC */ + adv7511_wr_and_or(sd, 0x18, 0x7f, 0x0); + /* Output format: RGB 4:4:4, Active Format Information is valid, + * underscanned */ + adv7511_wr_and_or(sd, 0x55, 0x9c, 0x12); + /* AVI Info frame packet enable, Audio Info frame disable */ + adv7511_wr_and_or(sd, 0x44, 0xe7, 0x10); + /* Colorimetry, Active format aspect ratio: same as picure. */ + adv7511_wr(sd, 0x56, 0xa8); + /* No encryption */ + adv7511_wr_and_or(sd, 0xaf, 0xed, 0x0); + + /* Positive clk edge capture for input video clock */ + adv7511_wr_and_or(sd, 0xba, 0x1f, 0x60); + + adv7511_audio_setup(sd); + + v4l2_ctrl_handler_setup(&state->hdl); +} + +static void adv7511_notify_monitor_detect(struct v4l2_subdev *sd) +{ + struct adv7511_monitor_detect mdt; + struct adv7511_state *state = get_adv7511_state(sd); + + mdt.present = state->have_monitor; + v4l2_subdev_notify(sd, ADV7511_MONITOR_DETECT, (void *)&mdt); +} + +static void adv7511_check_monitor_present_status(struct v4l2_subdev *sd) +{ + struct adv7511_state *state = get_adv7511_state(sd); + /* read hotplug and rx-sense state */ + u8 status = adv7511_rd(sd, 0x42); + + v4l2_dbg(1, debug, sd, "%s: status: 0x%x%s%s\n", + __func__, + status, + status & MASK_ADV7511_HPD_DETECT ? ", hotplug" : "", + status & MASK_ADV7511_MSEN_DETECT ? ", rx-sense" : ""); + + /* update read only ctrls */ + v4l2_ctrl_s_ctrl(state->hotplug_ctrl, adv7511_have_hotplug(sd) ? 0x1 : 0x0); + v4l2_ctrl_s_ctrl(state->rx_sense_ctrl, adv7511_have_rx_sense(sd) ? 0x1 : 0x0); + + if ((status & MASK_ADV7511_HPD_DETECT) && ((status & MASK_ADV7511_MSEN_DETECT) || state->edid.segments)) { + v4l2_dbg(1, debug, sd, "%s: hotplug and (rx-sense or edid)\n", __func__); + if (!state->have_monitor) { + v4l2_dbg(1, debug, sd, "%s: monitor detected\n", __func__); + state->have_monitor = true; + adv7511_set_isr(sd, true); + if (!adv7511_s_power(sd, true)) { + v4l2_dbg(1, debug, sd, "%s: monitor detected, powerup failed\n", __func__); + return; + } + adv7511_setup(sd); + adv7511_notify_monitor_detect(sd); + state->edid.read_retries = EDID_MAX_RETRIES; + queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY); + } + } else if (status & MASK_ADV7511_HPD_DETECT) { + v4l2_dbg(1, debug, sd, "%s: hotplug detected\n", __func__); + state->edid.read_retries = EDID_MAX_RETRIES; + queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY); + } else if (!(status & MASK_ADV7511_HPD_DETECT)) { + v4l2_dbg(1, debug, sd, "%s: hotplug not detected\n", __func__); + if (state->have_monitor) { + v4l2_dbg(1, debug, sd, "%s: monitor not detected\n", __func__); + state->have_monitor = false; + adv7511_notify_monitor_detect(sd); + } + adv7511_s_power(sd, false); + memset(&state->edid, 0, sizeof(struct adv7511_state_edid)); + adv7511_notify_no_edid(sd); + } +} + +static bool edid_block_verify_crc(u8 *edid_block) +{ + u8 sum = 0; + int i; + + for (i = 0; i < 128; i++) + sum += edid_block[i]; + return sum == 0; +} + +static bool edid_verify_crc(struct v4l2_subdev *sd, u32 segment) +{ + struct adv7511_state *state = get_adv7511_state(sd); + u32 blocks = state->edid.blocks; + u8 *data = state->edid.data; + + if (!edid_block_verify_crc(&data[segment * 256])) + return false; + if ((segment + 1) * 2 <= blocks) + return edid_block_verify_crc(&data[segment * 256 + 128]); + return true; +} + +static bool edid_verify_header(struct v4l2_subdev *sd, u32 segment) +{ + static const u8 hdmi_header[] = { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 + }; + struct adv7511_state *state = get_adv7511_state(sd); + u8 *data = state->edid.data; + + if (segment != 0) + return true; + return !memcmp(data, hdmi_header, sizeof(hdmi_header)); +} + +static bool adv7511_check_edid_status(struct v4l2_subdev *sd) +{ + struct adv7511_state *state = get_adv7511_state(sd); + u8 edidRdy = adv7511_rd(sd, 0xc5); + + v4l2_dbg(1, debug, sd, "%s: edid ready (retries: %d)\n", + __func__, EDID_MAX_RETRIES - state->edid.read_retries); + + if (state->edid.complete) + return true; + + if (edidRdy & MASK_ADV7511_EDID_RDY) { + int segment = adv7511_rd(sd, 0xc4); + struct adv7511_edid_detect ed; + + if (segment >= EDID_MAX_SEGM) { + v4l2_err(sd, "edid segment number too big\n"); + return false; + } + v4l2_dbg(1, debug, sd, "%s: got segment %d\n", __func__, segment); + adv7511_edid_rd(sd, 256, &state->edid.data[segment * 256]); + adv7511_dbg_dump_edid(2, debug, sd, segment, &state->edid.data[segment * 256]); + if (segment == 0) { + state->edid.blocks = state->edid.data[0x7e] + 1; + v4l2_dbg(1, debug, sd, "%s: %d blocks in total\n", __func__, state->edid.blocks); + } + if (!edid_verify_crc(sd, segment) || + !edid_verify_header(sd, segment)) { + /* edid crc error, force reread of edid segment */ + v4l2_err(sd, "%s: edid crc or header error\n", __func__); + state->have_monitor = false; + adv7511_s_power(sd, false); + adv7511_s_power(sd, true); + return false; + } + /* one more segment read ok */ + state->edid.segments = segment + 1; + v4l2_ctrl_s_ctrl(state->have_edid0_ctrl, 0x1); + if (((state->edid.data[0x7e] >> 1) + 1) > state->edid.segments) { + /* Request next EDID segment */ + v4l2_dbg(1, debug, sd, "%s: request segment %d\n", __func__, state->edid.segments); + adv7511_wr(sd, 0xc9, 0xf); + adv7511_wr(sd, 0xc4, state->edid.segments); + state->edid.read_retries = EDID_MAX_RETRIES; + queue_delayed_work(state->work_queue, &state->edid_handler, EDID_DELAY); + return false; + } + + v4l2_dbg(1, debug, sd, "%s: edid complete with %d segment(s)\n", __func__, state->edid.segments); + state->edid.complete = true; + ed.phys_addr = cec_get_edid_phys_addr(state->edid.data, + state->edid.segments * 256, + NULL); + /* report when we have all segments + but report only for segment 0 + */ + ed.present = true; + ed.segment = 0; + state->edid_detect_counter++; + cec_s_phys_addr(state->cec_adap, ed.phys_addr, false); + v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed); + return ed.present; + } + + return false; +} + +static int adv7511_registered(struct v4l2_subdev *sd) +{ + struct adv7511_state *state = get_adv7511_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int err; + + err = cec_register_adapter(state->cec_adap, &client->dev); + if (err) + cec_delete_adapter(state->cec_adap); + return err; +} + +static void adv7511_unregistered(struct v4l2_subdev *sd) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + cec_unregister_adapter(state->cec_adap); +} + +static const struct v4l2_subdev_internal_ops adv7511_int_ops = { + .registered = adv7511_registered, + .unregistered = adv7511_unregistered, +}; + +/* ----------------------------------------------------------------------- */ +/* Setup ADV7511 */ +static void adv7511_init_setup(struct v4l2_subdev *sd) +{ + struct adv7511_state *state = get_adv7511_state(sd); + struct adv7511_state_edid *edid = &state->edid; + u32 cec_clk = state->pdata.cec_clk; + u8 ratio; + + v4l2_dbg(1, debug, sd, "%s\n", __func__); + + /* clear all interrupts */ + adv7511_wr(sd, 0x96, 0xff); + adv7511_wr(sd, 0x97, 0xff); + /* + * Stop HPD from resetting a lot of registers. + * It might leave the chip in a partly un-initialized state, + * in particular with regards to hotplug bounces. + */ + adv7511_wr_and_or(sd, 0xd6, 0x3f, 0xc0); + memset(edid, 0, sizeof(struct adv7511_state_edid)); + state->have_monitor = false; + adv7511_set_isr(sd, false); + adv7511_s_stream(sd, false); + adv7511_s_audio_stream(sd, false); + + if (state->i2c_cec == NULL) + return; + + v4l2_dbg(1, debug, sd, "%s: cec_clk %d\n", __func__, cec_clk); + + /* cec soft reset */ + adv7511_cec_write(sd, 0x50, 0x01); + adv7511_cec_write(sd, 0x50, 0x00); + + /* legacy mode */ + adv7511_cec_write(sd, 0x4a, 0x00); + adv7511_cec_write(sd, 0x4a, 0x07); + + if (cec_clk % 750000 != 0) + v4l2_err(sd, "%s: cec_clk %d, not multiple of 750 Khz\n", + __func__, cec_clk); + + ratio = (cec_clk / 750000) - 1; + adv7511_cec_write(sd, 0x4e, ratio << 2); +} + +static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct adv7511_state *state; + struct adv7511_platform_data *pdata = client->dev.platform_data; + struct v4l2_ctrl_handler *hdl; + struct v4l2_subdev *sd; + u8 chip_id[2]; + int err = -EIO; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + state = devm_kzalloc(&client->dev, sizeof(struct adv7511_state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + /* Platform data */ + if (!pdata) { + v4l_err(client, "No platform data!\n"); + return -ENODEV; + } + memcpy(&state->pdata, pdata, sizeof(state->pdata)); + state->fmt_code = MEDIA_BUS_FMT_RGB888_1X24; + state->colorspace = V4L2_COLORSPACE_SRGB; + + sd = &state->sd; + + v4l2_dbg(1, debug, sd, "detecting adv7511 client on address 0x%x\n", + client->addr << 1); + + v4l2_i2c_subdev_init(sd, client, &adv7511_ops); + sd->internal_ops = &adv7511_int_ops; + + hdl = &state->hdl; + v4l2_ctrl_handler_init(hdl, 10); + /* add in ascending ID order */ + state->hdmi_mode_ctrl = v4l2_ctrl_new_std_menu(hdl, &adv7511_ctrl_ops, + V4L2_CID_DV_TX_MODE, V4L2_DV_TX_MODE_HDMI, + 0, V4L2_DV_TX_MODE_DVI_D); + state->hotplug_ctrl = v4l2_ctrl_new_std(hdl, NULL, + V4L2_CID_DV_TX_HOTPLUG, 0, 1, 0, 0); + state->rx_sense_ctrl = v4l2_ctrl_new_std(hdl, NULL, + V4L2_CID_DV_TX_RXSENSE, 0, 1, 0, 0); + state->have_edid0_ctrl = v4l2_ctrl_new_std(hdl, NULL, + V4L2_CID_DV_TX_EDID_PRESENT, 0, 1, 0, 0); + state->rgb_quantization_range_ctrl = + v4l2_ctrl_new_std_menu(hdl, &adv7511_ctrl_ops, + V4L2_CID_DV_TX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL, + 0, V4L2_DV_RGB_RANGE_AUTO); + state->content_type_ctrl = + v4l2_ctrl_new_std_menu(hdl, &adv7511_ctrl_ops, + V4L2_CID_DV_TX_IT_CONTENT_TYPE, V4L2_DV_IT_CONTENT_TYPE_NO_ITC, + 0, V4L2_DV_IT_CONTENT_TYPE_NO_ITC); + sd->ctrl_handler = hdl; + if (hdl->error) { + err = hdl->error; + goto err_hdl; + } + state->pad.flags = MEDIA_PAD_FL_SINK; + sd->entity.function = MEDIA_ENT_F_DV_ENCODER; + err = media_entity_pads_init(&sd->entity, 1, &state->pad); + if (err) + goto err_hdl; + + /* EDID and CEC i2c addr */ + state->i2c_edid_addr = state->pdata.i2c_edid << 1; + state->i2c_cec_addr = state->pdata.i2c_cec << 1; + state->i2c_pktmem_addr = state->pdata.i2c_pktmem << 1; + + state->chip_revision = adv7511_rd(sd, 0x0); + chip_id[0] = adv7511_rd(sd, 0xf5); + chip_id[1] = adv7511_rd(sd, 0xf6); + if (chip_id[0] != 0x75 || chip_id[1] != 0x11) { + v4l2_err(sd, "chip_id != 0x7511, read 0x%02x%02x\n", chip_id[0], + chip_id[1]); + err = -EIO; + goto err_entity; + } + + state->i2c_edid = i2c_new_dummy(client->adapter, + state->i2c_edid_addr >> 1); + if (state->i2c_edid == NULL) { + v4l2_err(sd, "failed to register edid i2c client\n"); + err = -ENOMEM; + goto err_entity; + } + + adv7511_wr(sd, 0xe1, state->i2c_cec_addr); + if (state->pdata.cec_clk < 3000000 || + state->pdata.cec_clk > 100000000) { + v4l2_err(sd, "%s: cec_clk %u outside range, disabling cec\n", + __func__, state->pdata.cec_clk); + state->pdata.cec_clk = 0; + } + + if (state->pdata.cec_clk) { + state->i2c_cec = i2c_new_dummy(client->adapter, + state->i2c_cec_addr >> 1); + if (state->i2c_cec == NULL) { + v4l2_err(sd, "failed to register cec i2c client\n"); + err = -ENOMEM; + goto err_unreg_edid; + } + adv7511_wr(sd, 0xe2, 0x00); /* power up cec section */ + } else { + adv7511_wr(sd, 0xe2, 0x01); /* power down cec section */ + } + + state->i2c_pktmem = i2c_new_dummy(client->adapter, state->i2c_pktmem_addr >> 1); + if (state->i2c_pktmem == NULL) { + v4l2_err(sd, "failed to register pktmem i2c client\n"); + err = -ENOMEM; + goto err_unreg_cec; + } + + state->work_queue = create_singlethread_workqueue(sd->name); + if (state->work_queue == NULL) { + v4l2_err(sd, "could not create workqueue\n"); + err = -ENOMEM; + goto err_unreg_pktmem; + } + + INIT_DELAYED_WORK(&state->edid_handler, adv7511_edid_handler); + + adv7511_init_setup(sd); + +#if IS_ENABLED(CONFIG_VIDEO_ADV7511_CEC) + state->cec_adap = cec_allocate_adapter(&adv7511_cec_adap_ops, + state, dev_name(&client->dev), CEC_CAP_DEFAULTS, + ADV7511_MAX_ADDRS); + err = PTR_ERR_OR_ZERO(state->cec_adap); + if (err) { + destroy_workqueue(state->work_queue); + goto err_unreg_pktmem; + } +#endif + + adv7511_set_isr(sd, true); + adv7511_check_monitor_present_status(sd); + + v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, + client->addr << 1, client->adapter->name); + return 0; + +err_unreg_pktmem: + i2c_unregister_device(state->i2c_pktmem); +err_unreg_cec: + if (state->i2c_cec) + i2c_unregister_device(state->i2c_cec); +err_unreg_edid: + i2c_unregister_device(state->i2c_edid); +err_entity: + media_entity_cleanup(&sd->entity); +err_hdl: + v4l2_ctrl_handler_free(&state->hdl); + return err; +} + +/* ----------------------------------------------------------------------- */ + +static int adv7511_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7511_state *state = get_adv7511_state(sd); + + state->chip_revision = -1; + + v4l2_dbg(1, debug, sd, "%s removed @ 0x%x (%s)\n", client->name, + client->addr << 1, client->adapter->name); + + adv7511_set_isr(sd, false); + adv7511_init_setup(sd); + cancel_delayed_work(&state->edid_handler); + i2c_unregister_device(state->i2c_edid); + if (state->i2c_cec) + i2c_unregister_device(state->i2c_cec); + i2c_unregister_device(state->i2c_pktmem); + destroy_workqueue(state->work_queue); + v4l2_device_unregister_subdev(sd); + media_entity_cleanup(&sd->entity); + v4l2_ctrl_handler_free(sd->ctrl_handler); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static const struct i2c_device_id adv7511_id[] = { + { "adv7511", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adv7511_id); + +static struct i2c_driver adv7511_driver = { + .driver = { + .name = "adv7511", + }, + .probe = adv7511_probe, + .remove = adv7511_remove, + .id_table = adv7511_id, +}; + +module_i2c_driver(adv7511_driver); -- cgit v1.2.3