From ffcfe30ebd8dd703d0fc4324ffe56ea21f5479f4 Mon Sep 17 00:00:00 2001 From: Preston Fick Date: Fri, 7 Nov 2014 23:26:11 -0600 Subject: USB: serial: cp210x: add IDs for CEL MeshConnect USB Stick Signed-off-by: Preston Fick Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index cfd009dc4018..6c4eb3cf5efd 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -120,6 +120,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */ { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */ + { USB_DEVICE(0x10C4, 0x8875) }, /* CEL MeshConnect USB Stick */ { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */ -- cgit v1.2.3 From 520fe7633692181bb6d1560d655fbdfbb7c05aaa Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 10 Nov 2014 14:39:44 -0600 Subject: usb: dwc3: ep0: fix for dead code commit 6856d30 (usb: dwc3: ep0: return early on NULL requests) tried to fix a minor corner case where we could dereference a NULL pointer but it also ended up introducing some dead code. Unfortunately, that dead code, if reached, could end up starving the endpoint request list because a request would never be given back when it should. Fix this by moving the check for empty request list before its first use. Reported-by: Dave Jones Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/ep0.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 711b23019d54..df38e7ef4976 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -791,6 +791,10 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, trb = dwc->ep0_trb; + r = next_request(&ep0->request_list); + if (!r) + return; + status = DWC3_TRB_SIZE_TRBSTS(trb->size); if (status == DWC3_TRBSTS_SETUP_PENDING) { dwc3_trace(trace_dwc3_ep0, "Setup Pending received"); @@ -801,10 +805,6 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, return; } - r = next_request(&ep0->request_list); - if (!r) - return; - ur = &r->request; length = trb->size & DWC3_TRB_SIZE_MASK; -- cgit v1.2.3 From 204ec6e07ea7aff863df0f7c53301f9cbbfbb9d3 Mon Sep 17 00:00:00 2001 From: Troy Clark Date: Mon, 17 Nov 2014 14:33:17 -0800 Subject: usb: serial: ftdi_sio: add PIDs for Matrix Orbital products Add PIDs for new Matrix Orbital GTT series products. Signed-off-by: Troy Clark Cc: stable [johan: shorten commit message ] Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 33 +++++++++++++++++++++++++++++++++ drivers/usb/serial/ftdi_sio_ids.h | 39 +++++++++++++++++++++++++++++++++++---- 2 files changed, 68 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 0dad8ce5a609..1ebb351b9e9a 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -470,6 +470,39 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) }, { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) }, { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_4701_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9300_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9301_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9302_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9303_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9304_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9305_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9306_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9307_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9308_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9309_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9310_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9311_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9312_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9313_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9314_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9315_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9316_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9317_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9318_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9319_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931F_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 6786b705ccf6..e52409c9be99 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -926,8 +926,8 @@ #define BAYER_CONTOUR_CABLE_PID 0x6001 /* - * The following are the values for the Matrix Orbital FTDI Range - * Anything in this range will use an FT232RL. + * Matrix Orbital Intelligent USB displays. + * http://www.matrixorbital.com */ #define MTXORB_VID 0x1B3D #define MTXORB_FTDI_RANGE_0100_PID 0x0100 @@ -1186,8 +1186,39 @@ #define MTXORB_FTDI_RANGE_01FD_PID 0x01FD #define MTXORB_FTDI_RANGE_01FE_PID 0x01FE #define MTXORB_FTDI_RANGE_01FF_PID 0x01FF - - +#define MTXORB_FTDI_RANGE_4701_PID 0x4701 +#define MTXORB_FTDI_RANGE_9300_PID 0x9300 +#define MTXORB_FTDI_RANGE_9301_PID 0x9301 +#define MTXORB_FTDI_RANGE_9302_PID 0x9302 +#define MTXORB_FTDI_RANGE_9303_PID 0x9303 +#define MTXORB_FTDI_RANGE_9304_PID 0x9304 +#define MTXORB_FTDI_RANGE_9305_PID 0x9305 +#define MTXORB_FTDI_RANGE_9306_PID 0x9306 +#define MTXORB_FTDI_RANGE_9307_PID 0x9307 +#define MTXORB_FTDI_RANGE_9308_PID 0x9308 +#define MTXORB_FTDI_RANGE_9309_PID 0x9309 +#define MTXORB_FTDI_RANGE_930A_PID 0x930A +#define MTXORB_FTDI_RANGE_930B_PID 0x930B +#define MTXORB_FTDI_RANGE_930C_PID 0x930C +#define MTXORB_FTDI_RANGE_930D_PID 0x930D +#define MTXORB_FTDI_RANGE_930E_PID 0x930E +#define MTXORB_FTDI_RANGE_930F_PID 0x930F +#define MTXORB_FTDI_RANGE_9310_PID 0x9310 +#define MTXORB_FTDI_RANGE_9311_PID 0x9311 +#define MTXORB_FTDI_RANGE_9312_PID 0x9312 +#define MTXORB_FTDI_RANGE_9313_PID 0x9313 +#define MTXORB_FTDI_RANGE_9314_PID 0x9314 +#define MTXORB_FTDI_RANGE_9315_PID 0x9315 +#define MTXORB_FTDI_RANGE_9316_PID 0x9316 +#define MTXORB_FTDI_RANGE_9317_PID 0x9317 +#define MTXORB_FTDI_RANGE_9318_PID 0x9318 +#define MTXORB_FTDI_RANGE_9319_PID 0x9319 +#define MTXORB_FTDI_RANGE_931A_PID 0x931A +#define MTXORB_FTDI_RANGE_931B_PID 0x931B +#define MTXORB_FTDI_RANGE_931C_PID 0x931C +#define MTXORB_FTDI_RANGE_931D_PID 0x931D +#define MTXORB_FTDI_RANGE_931E_PID 0x931E +#define MTXORB_FTDI_RANGE_931F_PID 0x931F /* * The Mobility Lab (TML) -- cgit v1.2.3 From 5d1678a33c731b56e245e888fdae5e88efce0997 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 18 Nov 2014 11:25:19 +0100 Subject: USB: keyspan: fix tty line-status reporting Fix handling of TTY error flags, which are not bitmasks and must specifically not be ORed together as this prevents the line discipline from recognising them. Also insert null characters when reporting overrun errors as these are not associated with the received character. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/keyspan.c | 76 ++++++++++++++++++++++++++++---------------- 1 file changed, 48 insertions(+), 28 deletions(-) diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 93cb7cebda62..7799d8bc4a63 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -321,14 +321,19 @@ static void usa26_indat_callback(struct urb *urb) /* some bytes had errors, every byte has status */ dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); for (i = 0; i + 1 < urb->actual_length; i += 2) { - int stat = data[i], flag = 0; - if (stat & RXERROR_OVERRUN) - flag |= TTY_OVERRUN; - if (stat & RXERROR_FRAMING) - flag |= TTY_FRAME; - if (stat & RXERROR_PARITY) - flag |= TTY_PARITY; + int stat = data[i]; + int flag = TTY_NORMAL; + + if (stat & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } /* XXX should handle break (0x10) */ + if (stat & RXERROR_PARITY) + flag = TTY_PARITY; + else if (stat & RXERROR_FRAMING) + flag = TTY_FRAME; + tty_insert_flip_char(&port->port, data[i+1], flag); } @@ -649,14 +654,19 @@ static void usa49_indat_callback(struct urb *urb) } else { /* some bytes had errors, every byte has status */ for (i = 0; i + 1 < urb->actual_length; i += 2) { - int stat = data[i], flag = 0; - if (stat & RXERROR_OVERRUN) - flag |= TTY_OVERRUN; - if (stat & RXERROR_FRAMING) - flag |= TTY_FRAME; - if (stat & RXERROR_PARITY) - flag |= TTY_PARITY; + int stat = data[i]; + int flag = TTY_NORMAL; + + if (stat & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } /* XXX should handle break (0x10) */ + if (stat & RXERROR_PARITY) + flag = TTY_PARITY; + else if (stat & RXERROR_FRAMING) + flag = TTY_FRAME; + tty_insert_flip_char(&port->port, data[i+1], flag); } @@ -713,15 +723,19 @@ static void usa49wg_indat_callback(struct urb *urb) */ for (x = 0; x + 1 < len && i + 1 < urb->actual_length; x += 2) { - int stat = data[i], flag = 0; + int stat = data[i]; + int flag = TTY_NORMAL; - if (stat & RXERROR_OVERRUN) - flag |= TTY_OVERRUN; - if (stat & RXERROR_FRAMING) - flag |= TTY_FRAME; - if (stat & RXERROR_PARITY) - flag |= TTY_PARITY; + if (stat & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } /* XXX should handle break (0x10) */ + if (stat & RXERROR_PARITY) + flag = TTY_PARITY; + else if (stat & RXERROR_FRAMING) + flag = TTY_FRAME; + tty_insert_flip_char(&port->port, data[i+1], flag); i += 2; @@ -784,14 +798,20 @@ static void usa90_indat_callback(struct urb *urb) /* some bytes had errors, every byte has status */ dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); for (i = 0; i + 1 < urb->actual_length; i += 2) { - int stat = data[i], flag = 0; - if (stat & RXERROR_OVERRUN) - flag |= TTY_OVERRUN; - if (stat & RXERROR_FRAMING) - flag |= TTY_FRAME; - if (stat & RXERROR_PARITY) - flag |= TTY_PARITY; + int stat = data[i]; + int flag = TTY_NORMAL; + + if (stat & RXERROR_OVERRUN) { + tty_insert_flip_char( + &port->port, 0, + TTY_OVERRUN); + } /* XXX should handle break (0x10) */ + if (stat & RXERROR_PARITY) + flag = TTY_PARITY; + else if (stat & RXERROR_FRAMING) + flag = TTY_FRAME; + tty_insert_flip_char(&port->port, data[i+1], flag); } -- cgit v1.2.3 From 855515a6d3731242d85850a206f2ec084c917338 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 18 Nov 2014 11:25:20 +0100 Subject: USB: keyspan: fix overrun-error reporting Fix reporting of overrun errors, which are not associated with a character. Instead insert a null character and report only once. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/keyspan.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 7799d8bc4a63..077c714f1285 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -311,12 +311,13 @@ static void usa26_indat_callback(struct urb *urb) if ((data[0] & 0x80) == 0) { /* no errors on individual bytes, only possible overrun err */ - if (data[0] & RXERROR_OVERRUN) - err = TTY_OVERRUN; - else - err = 0; + if (data[0] & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } for (i = 1; i < urb->actual_length ; ++i) - tty_insert_flip_char(&port->port, data[i], err); + tty_insert_flip_char(&port->port, data[i], + TTY_NORMAL); } else { /* some bytes had errors, every byte has status */ dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); @@ -787,13 +788,13 @@ static void usa90_indat_callback(struct urb *urb) if ((data[0] & 0x80) == 0) { /* no errors on individual bytes, only possible overrun err*/ - if (data[0] & RXERROR_OVERRUN) - err = TTY_OVERRUN; - else - err = 0; + if (data[0] & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } for (i = 1; i < urb->actual_length ; ++i) tty_insert_flip_char(&port->port, - data[i], err); + data[i], TTY_NORMAL); } else { /* some bytes had errors, every byte has status */ dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); -- cgit v1.2.3 From 75bcbf29c284dd0154c3e895a0bd1ef0e796160e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 18 Nov 2014 11:25:21 +0100 Subject: USB: ssu100: fix overrun-error reporting Fix reporting of overrun errors, which should only be reported once using the inserted null character. Fixes: 6b8f1ca5581b ("USB: ssu100: set tty_flags in ssu100_process_packet") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ssu100.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index a7fe664b6b7d..70a098de429f 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -490,10 +490,9 @@ static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr, if (*tty_flag == TTY_NORMAL) *tty_flag = TTY_FRAME; } - if (lsr & UART_LSR_OE){ + if (lsr & UART_LSR_OE) { port->icount.overrun++; - if (*tty_flag == TTY_NORMAL) - *tty_flag = TTY_OVERRUN; + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); } } @@ -511,12 +510,8 @@ static void ssu100_process_read_urb(struct urb *urb) if ((len >= 4) && (packet[0] == 0x1b) && (packet[1] == 0x1b) && ((packet[2] == 0x00) || (packet[2] == 0x01))) { - if (packet[2] == 0x00) { + if (packet[2] == 0x00) ssu100_update_lsr(port, packet[3], &flag); - if (flag == TTY_OVERRUN) - tty_insert_flip_char(&port->port, 0, - TTY_OVERRUN); - } if (packet[2] == 0x01) ssu100_update_msr(port, packet[3]); -- cgit v1.2.3 From 8daee1352d51a32676b84bddcc0e3252d1caa833 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 21 Nov 2014 13:28:03 +0100 Subject: USB: uas: Add no-uas quirk for Hitachi usb-3 enclosures 4971:1012 These disks have a broken uas implementation, the tag field of the status iu-s is not set properly, so we need to fall-back to usb-storage for these. Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_uas.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 2fefaf923e4a..18a283d6de1c 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -103,3 +103,10 @@ UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999, "VL711", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_ATA_1X), + +/* Reported-by: Hans de Goede */ +UNUSUAL_DEV(0x4971, 0x1012, 0x0000, 0x9999, + "Hitachi", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), -- cgit v1.2.3 From c3492dbfa1050debf23a5b5cd2bc7514c5b37896 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 18 Nov 2014 11:27:11 +0200 Subject: USB: xhci: don't start a halted endpoint before its new dequeue is set A halted endpoint ring must first be reset, then move the ring dequeue pointer past the problematic TRB. If we start the ring too early after reset, but before moving the dequeue pointer we will end up executing the same problematic TRB again. As we always issue a set transfer dequeue command after a reset endpoint command we can skip starting endpoint rings at reset endpoint command completion. Without this fix we end up trying to handle the same faulty TD for contol endpoints. causing timeout, and failing testusb ctrl_out write tests. Fixes: e9df17e (USB: xhci: Correct assumptions about number of rings per endpoint.) Cc: #v2.6.35 Tested-by: Felipe Balbi Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index bc6fcbc16f61..fbd0342af286 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1067,9 +1067,8 @@ static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id, false); xhci_ring_cmd_db(xhci); } else { - /* Clear our internal halted state and restart the ring(s) */ + /* Clear our internal halted state */ xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED; - ring_doorbell_for_active_rings(xhci, slot_id, ep_index); } } -- cgit v1.2.3 From 9b41ebd3cf0f68d8cad779d3eeba336f78262e43 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Tue, 18 Nov 2014 11:27:13 +0200 Subject: Revert "xhci: clear root port wake on bits if controller isn't wake-up capable" commit ff8cbf250b44 ("xhci: clear root port wake on bits if controller isn't") can cause device detection error if runtime PM is enabled, and S3 wake is disabled. Revert it. https://bugzilla.kernel.org/show_bug.cgi?id=85701 This commit got into stable and should be reverted from there as well. Cc: stable # v3.2+ Signed-off-by: Lu Baolu Reported-by: Dmitry Nezhevenko [Mathias Nyman: reword commit message] Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 696160d48ae8..388cfd83b6b6 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -22,7 +22,6 @@ #include -#include #include #include "xhci.h" @@ -1149,9 +1148,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) * including the USB 3.0 roothub, but only if CONFIG_PM_RUNTIME * is enabled, so also enable remote wake here. */ - if (hcd->self.root_hub->do_remote_wakeup - && device_may_wakeup(hcd->self.controller)) { - + if (hcd->self.root_hub->do_remote_wakeup) { if (t1 & PORT_CONNECT) { t2 |= PORT_WKOC_E | PORT_WKDISC_E; t2 &= ~PORT_WKCONN_E; -- cgit v1.2.3 From 8e71a322fdb127814bcba423a512914ca5bc6cf5 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 18 Nov 2014 11:27:12 +0200 Subject: USB: xhci: Reset a halted endpoint immediately when we encounter a stall. If a device is halted and reuturns a STALL, then the halted endpoint needs to be cleared both on the host and device side. The host side halt is cleared by issueing a xhci reset endpoint command. The device side is cleared with a ClearFeature(ENDPOINT_HALT) request, which should be issued by the device driver if a URB reruen -EPIPE. Previously we cleared the host side halt after the device side was cleared. To make sure the host side halt is cleared in time we want to issue the reset endpoint command immedialtely when a STALL status is encountered. Otherwise we end up not following the specs and not returning -EPIPE several times in a row when trying to transfer data to a halted endpoint. Fixes: bcef3fd (USB: xhci: Handle errors that cause endpoint halts.) Cc: # v2.6.33+ Tested-by: Felipe Balbi Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 40 +++++++-------------------- drivers/usb/host/xhci.c | 65 ++++++++++---------------------------------- 2 files changed, 25 insertions(+), 80 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index fbd0342af286..06433aec81d7 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1822,22 +1822,13 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td, ep->stopped_td = td; return 0; } else { - if (trb_comp_code == COMP_STALL) { - /* The transfer is completed from the driver's - * perspective, but we need to issue a set dequeue - * command for this stalled endpoint to move the dequeue - * pointer past the TD. We can't do that here because - * the halt condition must be cleared first. Let the - * USB class driver clear the stall later. - */ - ep->stopped_td = td; - ep->stopped_stream = ep_ring->stream_id; - } else if (xhci_requires_manual_halt_cleanup(xhci, - ep_ctx, trb_comp_code)) { - /* Other types of errors halt the endpoint, but the - * class driver doesn't call usb_reset_endpoint() unless - * the error is -EPIPE. Clear the halted status in the - * xHCI hardware manually. + if (trb_comp_code == COMP_STALL || + xhci_requires_manual_halt_cleanup(xhci, ep_ctx, + trb_comp_code)) { + /* Issue a reset endpoint command to clear the host side + * halt, followed by a set dequeue command to move the + * dequeue pointer past the TD. + * The class driver clears the device side halt later. */ xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index, ep_ring->stream_id, @@ -1957,9 +1948,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td, else td->urb->actual_length = 0; - xhci_cleanup_halted_endpoint(xhci, - slot_id, ep_index, 0, td, event_trb); - return finish_td(xhci, td, event_trb, event, ep, status, true); + return finish_td(xhci, td, event_trb, event, ep, status, false); } /* * Did we transfer any data, despite the errors that might have @@ -2518,17 +2507,8 @@ cleanup: if (ret) { urb = td->urb; urb_priv = urb->hcpriv; - /* Leave the TD around for the reset endpoint function - * to use(but only if it's not a control endpoint, - * since we already queued the Set TR dequeue pointer - * command for stalled control endpoints). - */ - if (usb_endpoint_xfer_control(&urb->ep->desc) || - (trb_comp_code != COMP_STALL && - trb_comp_code != COMP_BABBLE)) - xhci_urb_free_priv(xhci, urb_priv); - else - kfree(urb_priv); + + xhci_urb_free_priv(xhci, urb_priv); usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb); if ((urb->actual_length != urb->transfer_buffer_length && diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 2a5d45b4cb15..4d0d2407b71c 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2912,68 +2912,33 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, } } -/* Deal with stalled endpoints. The core should have sent the control message - * to clear the halt condition. However, we need to make the xHCI hardware - * reset its sequence number, since a device will expect a sequence number of - * zero after the halt condition is cleared. +/* Called when clearing halted device. The core should have sent the control + * message to clear the device halt condition. The host side of the halt should + * already be cleared with a reset endpoint command issued when the STALL tx + * event was received. + * * Context: in_interrupt */ + void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) { struct xhci_hcd *xhci; - struct usb_device *udev; - unsigned int ep_index; - unsigned long flags; - int ret; - struct xhci_virt_ep *virt_ep; - struct xhci_command *command; xhci = hcd_to_xhci(hcd); - udev = (struct usb_device *) ep->hcpriv; - /* Called with a root hub endpoint (or an endpoint that wasn't added - * with xhci_add_endpoint() - */ - if (!ep->hcpriv) - return; - ep_index = xhci_get_endpoint_index(&ep->desc); - virt_ep = &xhci->devs[udev->slot_id]->eps[ep_index]; - if (!virt_ep->stopped_td) { - xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, - "Endpoint 0x%x not halted, refusing to reset.", - ep->desc.bEndpointAddress); - return; - } - if (usb_endpoint_xfer_control(&ep->desc)) { - xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, - "Control endpoint stall already handled."); - return; - } - - command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); - if (!command) - return; - xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, - "Queueing reset endpoint command"); - spin_lock_irqsave(&xhci->lock, flags); - ret = xhci_queue_reset_ep(xhci, command, udev->slot_id, ep_index); /* - * Can't change the ring dequeue pointer until it's transitioned to the - * stopped state, which is only upon a successful reset endpoint - * command. Better hope that last command worked! + * We might need to implement the config ep cmd in xhci 4.8.1 note: + * The Reset Endpoint Command may only be issued to endpoints in the + * Halted state. If software wishes reset the Data Toggle or Sequence + * Number of an endpoint that isn't in the Halted state, then software + * may issue a Configure Endpoint Command with the Drop and Add bits set + * for the target endpoint. that is in the Stopped state. */ - if (!ret) { - xhci_cleanup_stalled_ring(xhci, udev, ep_index); - kfree(virt_ep->stopped_td); - xhci_ring_cmd_db(xhci); - } - virt_ep->stopped_td = NULL; - virt_ep->stopped_stream = 0; - spin_unlock_irqrestore(&xhci->lock, flags); - if (ret) - xhci_warn(xhci, "FIXME allocate a new ring segment\n"); + /* For now just print debug to follow the situation */ + xhci_dbg(xhci, "Endpoint 0x%x ep reset callback called\n", + ep->desc.bEndpointAddress); } static int xhci_check_streams_endpoint(struct xhci_hcd *xhci, -- cgit v1.2.3 From a1377e5397ab321e21b793ec8cd2b6f12bd3c718 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Tue, 18 Nov 2014 11:27:14 +0200 Subject: usb: xhci: rework root port wake bits if controller isn't allowed to wakeup When system is being suspended, if host device is not allowed to do wakeup, xhci_suspend() needs to clear all root port wake on bits. Otherwise, some platforms may generate spurious wakeup, even if PCI PME# is disabled. The initial commit ff8cbf250b44 ("xhci: clear root port wake on bits"), which also got into stable, turned out to not work correctly and had to be reverted, and is now rewritten. Cc: stable # v3.2+ Signed-off-by: Lu Baolu Suggested-by: Alan Stern Acked-by: Alan Stern [Mathias Nyman: reword commit message] Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 2 +- drivers/usb/host/xhci-plat.c | 10 +++++++++- drivers/usb/host/xhci.c | 42 +++++++++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci.h | 2 +- 4 files changed, 52 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 9a69b1f1b300..142b601f9563 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -281,7 +281,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) if (xhci->quirks & XHCI_COMP_MODE_QUIRK) pdev->no_d3cold = true; - return xhci_suspend(xhci); + return xhci_suspend(xhci, do_wakeup); } static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 3d78b0cd674b..646300cbe5f7 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -204,7 +204,15 @@ static int xhci_plat_suspend(struct device *dev) struct usb_hcd *hcd = dev_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); - return xhci_suspend(xhci); + /* + * xhci_suspend() needs `do_wakeup` to know whether host is allowed + * to do wakeup during suspend. Since xhci_plat_suspend is currently + * only designed for system suspend, device_may_wakeup() is enough + * to dertermine whether host is allowed to do wakeup. Need to + * reconsider this when xhci_plat_suspend enlarges its scope, e.g., + * also applies to runtime suspend. + */ + return xhci_suspend(xhci, device_may_wakeup(dev)); } static int xhci_plat_resume(struct device *dev) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 4d0d2407b71c..033b46c470bd 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -35,6 +35,8 @@ #define DRIVER_AUTHOR "Sarah Sharp" #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" +#define PORT_WAKE_BITS (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E) + /* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */ static int link_quirk; module_param(link_quirk, int, S_IRUGO | S_IWUSR); @@ -851,13 +853,47 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci) xhci_set_cmd_ring_deq(xhci); } +static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci) +{ + int port_index; + __le32 __iomem **port_array; + unsigned long flags; + u32 t1, t2; + + spin_lock_irqsave(&xhci->lock, flags); + + /* disble usb3 ports Wake bits*/ + port_index = xhci->num_usb3_ports; + port_array = xhci->usb3_ports; + while (port_index--) { + t1 = readl(port_array[port_index]); + t1 = xhci_port_state_to_neutral(t1); + t2 = t1 & ~PORT_WAKE_BITS; + if (t1 != t2) + writel(t2, port_array[port_index]); + } + + /* disble usb2 ports Wake bits*/ + port_index = xhci->num_usb2_ports; + port_array = xhci->usb2_ports; + while (port_index--) { + t1 = readl(port_array[port_index]); + t1 = xhci_port_state_to_neutral(t1); + t2 = t1 & ~PORT_WAKE_BITS; + if (t1 != t2) + writel(t2, port_array[port_index]); + } + + spin_unlock_irqrestore(&xhci->lock, flags); +} + /* * Stop HC (not bus-specific) * * This is called when the machine transition into S3/S4 mode. * */ -int xhci_suspend(struct xhci_hcd *xhci) +int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup) { int rc = 0; unsigned int delay = XHCI_MAX_HALT_USEC; @@ -868,6 +904,10 @@ int xhci_suspend(struct xhci_hcd *xhci) xhci->shared_hcd->state != HC_STATE_SUSPENDED) return -EINVAL; + /* Clear root port wake on bits if wakeup not allowed. */ + if (!do_wakeup) + xhci_disable_port_wake_on_bits(xhci); + /* Don't poll the roothubs on bus suspend. */ xhci_dbg(xhci, "%s: stopping port polling.\n", __func__); clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index df76d642e719..d745715a1e2f 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1746,7 +1746,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks); void xhci_init_driver(struct hc_driver *drv, int (*setup_fn)(struct usb_hcd *)); #ifdef CONFIG_PM -int xhci_suspend(struct xhci_hcd *xhci); +int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup); int xhci_resume(struct xhci_hcd *xhci, bool hibernated); #else #define xhci_suspend NULL -- cgit v1.2.3 From 263e80b43559a6103e178a9176938ce171b23872 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 24 Nov 2014 11:22:38 +0100 Subject: usb-quirks: Add reset-resume quirk for MS Wireless Laser Mouse 6000 This wireless mouse receiver needs a reset-resume quirk to properly come out of reset. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1165206 Signed-off-by: Hans de Goede Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 39b4081b632d..96fafed92b76 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -44,6 +44,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Creative SB Audigy 2 NX */ { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Microsoft Wireless Laser Mouse 6000 Receiver */ + { USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Microsoft LifeCam-VX700 v2.0 */ { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v1.2.3