aboutsummaryrefslogtreecommitdiffstats
path: root/doc
Commit message (Collapse)AuthorAgeFilesLines
* Some code cleanupWolfgang Denk2006-04-161-2/+0
|
* Support for DDR with 32-data path. Addotional notes on injectingRafal Jaworowski2006-03-161-0/+21
| | | | multiple-bit errors.
* Add command for handling DDR ECC registers on MPC8349EE MDS board.Marian Balakowicz2006-03-161-0/+135
|
* Minor code cleanupWolfgang Denk2006-03-061-4/+3
|
* Merge the new NAND code (testing-NAND brach); see doc/README.nandWolfgang Denk2006-03-061-0/+35
| | | | | | | Rewrite of NAND code based on what is in 2.6.12 Linux kernel Patch by Ladislav Michl, 29 Jun 2005 [Merge with /home/tur/nand/u-boot]
* Code cleanup, especially MIPS for GCC 4.xWolfgang Denk2005-12-041-1/+1
|
* Change all '$(...)' variable references into '${...}'Wolfgang Denk2005-11-202-4/+4
| | | | | | which makes the environment compatible with the hush shell. WARNING: Support for the old '$(...)' syntax will be discontinued in a later version.
* Add documentation for Open Firmware Flat Tree and usage.Wolfgang Denk2005-10-131-0/+28
| | | | Patch by Pantelis Antoniou, 13 Oct 2005
* Update make target for ARM supported boards.Wolfgang Denk2005-10-061-0/+46
| | | | | Use lowlevel_init() instead of platformsetup() [rename]. Patch by Peter Pearse, 06 Oct 2005
* Update ARM Integrator boards:Wolfgang Denk2005-10-041-0/+1
| | | | | | | Correct addessing errors in platform files. Split off common core module data from Integrator header files to include/armcoremodule.h. Patch by Peter Pearse, 04 Oct 2005
* CleanupWolfgang Denk2005-09-251-13/+10
|
* Add ARM946E cpu and core module targets; remap memory to 0x00000000Wolfgang Denk2005-09-251-0/+66
| | | | Patch by Peter Pearse, 2 Feb 2005
* Cleanup (PPC4xx is AMCC now)Wolfgang Denk2005-09-238-13/+13
|
* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.Wolfgang Denk2005-08-151-0/+59
| | | | Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
* Document switching between U-Boot and PlanetCore on RPXliteWolfgang Denk2005-08-061-0/+163
| | | | by Sam Song, 24 Dec 2004
* Add support for ep8248 boardWolfgang Denk2005-08-061-6/+8
| | | | | | Patch by Yuli Barcohen, 12 Dec 2004 Minor code cleanup.
* Merge with rsync://git-user@source.denx.net/git/u-boot.gitJon Loeliger2005-08-021-0/+31
|\
| * Major cleanup for AMCC PPC4xx eval boards.Stefan Roese2005-08-011-0/+31
| | | | | | | | Patch by Stefan Roese, 01 Aug 2005
* | * Patch by Eran LibertyEran Liberty2005-07-281-0/+96
| | | | | | | | Add support for the Freescale MPC8349ADS board.
* | * Patch by Jon Loeliger, 2005-05-05Jon Loeliger2005-07-252-6/+46
| | | | | | | | | | | | | | | | Implemented support for MPC8548CDS board. Added DDR II support based on SPD values for MPC85xx boards. This roll-up patch also includes bugfies for the previously published patches: DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
* | * Patch by Jon Loeliger, Kumar Gala 2005-02-08Jon Loeliger2005-07-231-1/+0
|/ | | | | | | | - Convert the CPM2 based functionality to use new CONFIG_CPM2 option rather than a myriad of CONFIG_MPC8560-like variants. Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560. Eliminates the CONFIG_MPC8560 option entirely. Distributes the new CONFIG_CPM2 option to each 8260 board.
* Auto-size RAM on canmb board.wdenk2005-04-201-6/+6
| | | | Cleanup.
* * Patch by Stefan Roese, 06 Apr 2005:stroese2005-04-071-0/+99
| | | | | | | Updates for OCOTEA board: - Changed U-Boot size from 512kByte to 256kByte - Fixed flash driver to support boot from soldered user flash - Added README for switch from PIBS firmware to U-Boot
* * Patch by Richard Klingler, 03 Apr 2005:wdenk2005-04-031-1/+26
| | | | | | | | | Add call to eth_halt() in net/net.c when called functions fail after eth_init() has been called. * Patch by Sam Song, 3 April 2005: - Update README.Netconsole - Update README
* Prepare for SoC rework of ARM code:wdenk2005-04-021-1/+1
| | | | | - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL - rename memsetup into lowlevel_init (function name and source files)
* * Patch by Masami Komiya, 30 Mar 2005:wdenk2005-04-011-0/+17
| | | | | | | | add SNTP support and expand time server and time offset fields of DHCP support. See doc/README.SNTP * Patch by Steven Scholz, 13 Dec 2004: Fix bug in at91rm920 ethernet driver
* * Patches by Richard Woodruff, 01 Oct 2004:wdenk2005-01-091-0/+38
| | | | | | | | add support for the TI OMAP2420 processor and its H4 reference board * Patch by Christian Pellegrin, 24 Sep 2004: Added support for NE2000 compatible (DP8390, DP83902) NICs.
* * Patch by Leif Lindholm, 23 Sep 2004:wdenk2005-01-091-0/+17
| | | | | | | | add support for the AMD db1550 board * Patch by Travis Sawyer, 15 Sep 2004: Add CONFIG_SERIAL_MULTI support for ppc4xx, update README.serial_multi
* Patch by Florian Schlote, 08 Sep 2004:wdenk2005-01-091-0/+156
| | | | Add support for SenTec-COBRA5272-board (Coldfire).
* * Clean up CMC PU2 flash driverwdenk2004-12-101-1/+4
| | | | | | * Update MAINTAINERS file * Fix bug in MPC823 LCD driver
* Patch by TsiChung Liew, 23 Sep 2004:wdenk2004-10-281-0/+482
| | | | | - add support for MPC8220 CPU - Add support for Alaska and Yukon boards
* Cleanupwdenk2004-10-112-41/+43
|
* * Patch by Gridish Shlomi, 30 Aug 2004:wdenk2004-10-101-21/+22
| | | | | | | | | | | | | | | | | - Add support to revA version of PQ27 and PQ27E. - Reverted MPC8260ADS baudrate back to original 115200 * Patch by Hojin, 17 Sep 2004: Fix typo in cfi_flash.c * Patch by Mark Jonas, 09 September 2004: mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong error message * Patch by Mark Jonas, 31 August 2004: Added option CFG_XLB_PIPELINING to enable XLB pipelining. This improves FTP performance for MPC5200 systems. Enabled for IceCube by default.
* * Patch by Michael Bendzick, 30 Aug 2004:wdenk2004-10-101-0/+55
| | | | | | | | | - Improve platform.S code for omap1510inn that detects whether code is running from SDRAM or not. Patch allows SDRAM to be configured if code is running out of SRAM at 0x20000000. * Patch by Frederick Klatt, 30 Aug 2004: Add support for the Wind River SBC8540/SBC8560 boards
* Patches by Scott McNutt, 24 Aug 2004:wdenk2004-10-101-27/+26
| | | | | | - Add support for Altera Nios-II processors. - Add support for Psyent PCI-5441 board. - Add support for Psyent PK1C20 board.
* Patches by Jon Loeliger, 24 Aug 2004:wdenk2004-10-102-3/+190
| | | | | - Add support for the MPC8541 and MPC8555 CDS boards - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
* Patch by Steven Scholz, 16 Aug 2004:wdenk2004-10-091-0/+31
| | | | | | | | - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)" - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0 - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/ - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/ into cpu/arm920t/$(SOC)/
* * Patch by Yuli Barcohen, 13 Jul 2004:wdenk2004-09-281-10/+11
| | | | | | | | Allow clock setting on MPC866/MPC885 series chips according to environment variable `cpuclk' * Patch by Yuli Barcohen, 20 Apr 2004: Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
* * Patch by Detlev Zundel, 08 Sep 2004:wdenk2004-09-081-0/+21
| | | | | | | | | | | Update etags build target * Improve NetConsole support: add support for broadcast destination address and buffered input. * Cleanup compiler warnings for GCC 3.3.x and later * Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
* Add support for console over UDP (compatible to Ingo Molnar'swdenk2004-08-021-0/+68
| | | | netconsole patch under Linux)
* Patch by Jon Loeliger, 16 Jul 2004:wdenk2004-08-011-458/+164
| | | | | | | | | | | | | - support larger DDR memories up to 2G on the PC8540/8560ADS and STXGP3 boards - Made MPC8540/8560ADS be 33Mhz PCI by default. - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16 and CONFIG_L2_INIT_RAM options. - Refactor Local Bus initialization out of SDRAM setup. - Re-implement new version of LBC11/DDR11 errata workarounds. - Moved board specific PCI init parts out of CPU directory. - Added TLB entry for PCI-1 IO Memory - Updated README.mpc85xxads
* * Code cleanupwdenk2004-08-011-0/+37
| | | | | | | | | | | | | * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
* * Fix NSCU config; add ethernet wakeup code.wdenk2004-08-011-0/+3
| | | | * Add link for preloader for Motorola Coldfire to RAEDME.m68k
* * Patch by Fred Klatt, 25 Jun 2004:wdenk2004-07-101-0/+53
| | | | | | | | | | | | Add support for WindRiver's SBC8560 board * Patch by Nicolas Lacressonniere, 24 Jun 2004 Small Bugs fixes for "at91rm9200dk" board: - Timing modifications for SPI DataFlash access - Fix NAND flash detection bug * Patch by Nicolas Lacressonniere, 24 Jun 2004: Add Support for Flash AT49BV6416 for AT91RM9200DK board
* Patch by Jon Loeliger, 17 June 2004:wdenk2004-07-091-42/+64
| | | | | | | | Completion of the 8540ADS/8560ADS updates: Fix some PCI and Rapid I/O memory maps, Initialize both TSEC 1 and 2, Initialize SDRAM Update MAINTAINER for 85xx boards and README.mpc85xxads
* * Patch by Paul Ruhland, 17 May 2004:wdenk2004-06-091-3/+1
| | | | | | | | | | | | - Add support for the Logic Zoom LH7A40x based SDK board(s), specifically the LPD7A400. * Patches by Robert Schwebel, 15 May 2004: - call MAC address reading code also for SMSC91C111; - make SMSC91C111 timeout configurable, remove duplicate code - fix get_timer() for PXA - update doc/README.JFFS2 - use "bootfile" env variable also for jffs2
* Patch by Robert Schwebel, 13 May 2004:wdenk2004-06-091-8/+15
| | | | Add 'imgextract' command: extract one part of a multi file image.
* Patches by Jon Loeliger, 11 May 2004:wdenk2004-06-091-31/+57
| | | | (partially, as they contained a lot of crap)
* * Patch by Rishi Bhattacharya, 08 May 2004:wdenk2004-06-081-23/+19
| | | | | | | Add support for TI OMAP5912 OSK Board * Patch by Sam Song May, 07 May 2004: Fix typo of UPM table for rmu board
* * Patch by Dave Peverley, 30 Apr 2004:wdenk2004-06-061-0/+95
| | | | | | | | | | | | | | Add support for OMAP730 Perseus2 Development board * Patch by Alan J. Luse, 29 Apr 2004: Fix flash chip-select (OR0) option register setting on FADS boards. * Patch by Alan J. Luse, 29 Apr 2004: Report MII network speed and duplex setting properly when auto-negotiate is not enabled. * Patch by Jarrett Redd, 29 Apr 2004: Fix hang on reset on Ocotea board due to flash in wrong mode.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 15:29:02 +0000