diff options
Diffstat (limited to 'include/configs/xsengine.h')
| -rw-r--r-- | include/configs/xsengine.h | 216 |
1 files changed, 0 insertions, 216 deletions
diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h deleted file mode 100644 index 9606b5316b..0000000000 --- a/include/configs/xsengine.h +++ /dev/null @@ -1,216 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* High Level Configuration Options */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ -#define CONFIG_XSENGINE 1 -#define CONFIG_MMC 1 -#define CONFIG_DOS_PARTITION 1 -#define BOARD_LATE_INIT 1 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_NO_DCACHE - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ - -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* FLASH organization */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x00000000 /* Flash Bank #2 */ -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 127 KB sectors */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/* - * JFFS2 partitions - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=xsengine-0" -#define MTDPARTS_DEFAULT "mtdparts=xsengine-0:256k(uboot),1m(kernel1),8m(kernel2)" -*/ - -/* Environment settings */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) /* Addr of Environment Sector (after monitor)*/ -#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE /* Size of the Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* 16kB Total Size of Environment Sector */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (75*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (50*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ - -/* Hardware drivers */ -#define CONFIG_NET_MULTI -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE 0x04000300 -#define CONFIG_SMC_USE_32_BIT 1 - -/* select serial console configuration */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_BAUDRATE 115200 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_FAT -#define CONFIG_CMD_PING -#define CONFIG_CMD_JFFS2 - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.1.50 -#define CONFIG_SERVERIP 192.168.1.2 -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS1,115200" -#define CONFIG_CMDLINE_TAG - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "XS-Engine u-boot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_MEMTEST_START 0xA0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xA0800000 /* 4 ... 8 MB in DRAM */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */ -#define CONFIG_SYS_LOAD_ADDR 0xA0000000 /* load kernel to this address */ - -#ifdef CONFIG_MMC -#define CONFIG_PXA_MMC -#define CONFIG_CMD_MMC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#endif - -/* Stack sizes - The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* GP set register */ -#define CONFIG_SYS_GPSR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */ -#define CONFIG_SYS_GPSR1_VAL 0x00020000 /* nPWE */ -#define CONFIG_SYS_GPSR2_VAL 0x0000C000 /* CS2, CS3 */ - -/* GP clear register */ -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 - -/* GP direction register */ -#define CONFIG_SYS_GPDR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */ -#define CONFIG_SYS_GPDR1_VAL 0x00022A80 /* nPWE, FFUART + BTUART pins */ -#define CONFIG_SYS_GPDR2_VAL 0x0000C000 /* CS2, CS3 */ - -/* GP rising edge detect register */ -#define CONFIG_SYS_GRER0_VAL 0x00000000 -#define CONFIG_SYS_GRER1_VAL 0x00000000 -#define CONFIG_SYS_GRER2_VAL 0x00000000 - -/* GP falling edge detect register */ -#define CONFIG_SYS_GFER0_VAL 0x00000000 -#define CONFIG_SYS_GFER1_VAL 0x00000000 -#define CONFIG_SYS_GFER2_VAL 0x00000000 - -/* GP alternate function register */ -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 /* CS1 */ -#define CONFIG_SYS_GAFR0_U_VAL 0x00000010 /* RDY */ -#define CONFIG_SYS_GAFR1_L_VAL 0x09988050 /* FFUART + BTUART pins */ -#define CONFIG_SYS_GAFR1_U_VAL 0x00000008 /* nPWE */ -#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 /* CS2, CS3 */ -#define CONFIG_SYS_GAFR2_U_VAL 0x00000000 - -#define CONFIG_SYS_PSSR_VAL 0x00000020 /* Power manager sleep status */ -#define CONFIG_SYS_CCCR_VAL 0x00000161 /* 100 MHz memory, 400 MHz CPU */ -#define CONFIG_SYS_CKEN_VAL 0x000000C0 /* BTUART and FFUART enabled */ -#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */ - -/* Memory settings */ -#define CONFIG_SYS_MSC0_VAL 0x25F425F0 - -/* MDCNFG: SDRAM Configuration Register */ -#define CONFIG_SYS_MDCNFG_VAL 0x000009C9 - -/* MDREFR: SDRAM Refresh Control Register */ -#define CONFIG_SYS_MDREFR_VAL 0x00018018 - -/* MDMRS: Mode Register Set Configuration Register */ -#define CONFIG_SYS_MDMRS_VAL 0x00220022 - -#endif /* __CONFIG_H */ |