diff options
Diffstat (limited to 'cpu/ppc4xx/ecc.c')
| -rw-r--r-- | cpu/ppc4xx/ecc.c | 167 |
1 files changed, 115 insertions, 52 deletions
diff --git a/cpu/ppc4xx/ecc.c b/cpu/ppc4xx/ecc.c index 3f989e7f59..f105605459 100644 --- a/cpu/ppc4xx/ecc.c +++ b/cpu/ppc4xx/ecc.c @@ -2,7 +2,7 @@ * Copyright (c) 2008 Nuovation System Designs, LLC * Grant Erickson <gerickson@nuovations.com> * - * (C) Copyright 2005-2007 + * (C) Copyright 2005-2009 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * (C) Copyright 2002 @@ -42,81 +42,144 @@ #include <ppc_defs.h> #include <asm/processor.h> #include <asm/io.h> +#include <asm/mmu.h> +#include <asm/cache.h> #include "ecc.h" #if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) || \ defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2) #if defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) + +#if defined(CONFIG_405EX) /* - * void ecc_init() - * - * Description: - * This routine initializes a range of DRAM ECC memory with known - * data and enables ECC checking. - * - * TO DO: - * - Improve performance by utilizing cache. - * - Further generalize to make usable by other 4xx variants (e.g. - * 440EPx, et al). - * - * Input(s): - * start - A pointer to the start of memory covered by ECC requiring - * initialization. - * size - The size, in bytes, of the memory covered by ECC requiring - * initialization. - * - * Output(s): - * start - A pointer to the start of memory covered by ECC with - * CONFIG_SYS_ECC_PATTERN written to all locations and ECC data - * primed. - * - * Returns: - * N/A + * Currently only 405EX uses 16bit data bus width as an alternative + * option to 32bit data width (SDRAM0_MCOPT1_WDTH) */ -void ecc_init(unsigned long * const start, unsigned long size) +#define SDRAM_DATA_ALT_WIDTH 2 +#else +#define SDRAM_DATA_ALT_WIDTH 8 +#endif + +static void wait_ddr_idle(void) { - const unsigned long pattern = CONFIG_SYS_ECC_PATTERN; - unsigned long * const end = (unsigned long * const)((long)start + size); - unsigned long * current = start; + u32 val; + + do { + mfsdram(SDRAM_MCSTAT, val); + } while ((val & SDRAM_MCSTAT_IDLE_MASK) == SDRAM_MCSTAT_IDLE_NOT); +} + +static void program_ecc_addr(unsigned long start_address, + unsigned long num_bytes, + unsigned long tlb_word2_i_value) +{ + unsigned long current_address; + unsigned long end_address; + unsigned long address_increment; unsigned long mcopt1; - long increment; + char str[] = "ECC generation -"; + char slash[] = "\\|/-\\|/-"; + int loop = 0; + int loopi = 0; - if (start >= end) - return; + current_address = start_address; + mfsdram(SDRAM_MCOPT1, mcopt1); + if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) { + mtsdram(SDRAM_MCOPT1, + (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_GEN); + sync(); + eieio(); + wait_ddr_idle(); + + puts(str); - mfsdram(SDRAM_ECC_CFG, mcopt1); +#ifdef CONFIG_440 + if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) { +#endif + /* ECC bit set method for non-cached memory */ + if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) == SDRAM_MCOPT1_DMWD_32) + address_increment = 4; + else + address_increment = SDRAM_DATA_ALT_WIDTH; + end_address = current_address + num_bytes; - /* Enable ECC generation without checking or reporting */ + while (current_address < end_address) { + *((unsigned long *)current_address) = 0; + current_address += address_increment; - mtsdram(SDRAM_ECC_CFG, ((mcopt1 & ~SDRAM_ECC_CFG_MCHK_MASK) | - SDRAM_ECC_CFG_MCHK_GEN)); + if ((loop++ % (2 << 20)) == 0) { + putc('\b'); + putc(slash[loopi++ % 8]); + } + } +#ifdef CONFIG_440 + } else { + /* ECC bit set method for cached memory */ + dcbz_area(start_address, num_bytes); + /* Write modified dcache lines back to memory */ + clean_dcache_range(start_address, start_address + num_bytes); + } +#endif /* CONFIG_440 */ - increment = sizeof(u32); + blank_string(strlen(str)); -#if defined(CONFIG_440) + sync(); + eieio(); + wait_ddr_idle(); + + /* clear ECC error repoting registers */ + mtsdram(SDRAM_ECCES, 0xffffffff); + mtdcr(0x4c, 0xffffffff); + + mtsdram(SDRAM_MCOPT1, + (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_CHK_REP); + sync(); + eieio(); + wait_ddr_idle(); + } +} + +#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) +void ecc_init(unsigned long * const start, unsigned long size) +{ /* - * Look at the geometry of SDRAM (data width) to determine whether we - * can skip words when writing. + * Init ECC with cache disabled (on PPC's with IBM DDR + * controller (non DDR2), not tested with cache enabled yet */ + program_ecc_addr((u32)start, size, TLB_WORD2_I_ENABLE); +} +#endif - if ((mcopt1 & SDRAM_ECC_CFG_DMWD_MASK) != SDRAM_ECC_CFG_DMWD_32) - increment = sizeof(u64); -#endif /* defined(CONFIG_440) */ +#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2) +void do_program_ecc(unsigned long tlb_word2_i_value) +{ + unsigned long mcopt1; + unsigned long mcopt2; + unsigned long mcstat; + phys_size_t memsize = sdram_memsize(); - while (current < end) { - *current = pattern; - current = (unsigned long *)((long)current + increment); + if (memsize > CONFIG_MAX_MEM_MAPPED) { + printf("\nWarning: Can't enable ECC on systems with more than 2GB of SDRAM!\n"); + return; } - /* Wait until the writes are finished. */ + mfsdram(SDRAM_MCOPT1, mcopt1); + mfsdram(SDRAM_MCOPT2, mcopt2); - sync(); + if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) { + /* DDR controller must be enabled and not in self-refresh. */ + mfsdram(SDRAM_MCSTAT, mcstat); + if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE) + && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT) + && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK)) + == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) { - /* Enable ECC generation with checking and no reporting */ - - mtsdram(SDRAM_ECC_CFG, ((mcopt1 & ~SDRAM_ECC_CFG_MCHK_MASK) | - SDRAM_ECC_CFG_MCHK_CHK)); + program_ecc_addr(0, memsize, tlb_word2_i_value); + } + } } +#endif + #endif /* defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) */ #endif /* defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)... */ |