diff options
Diffstat (limited to 'board/tqm5200')
| -rwxr-xr-x | board/tqm5200/cmd_stk52xx.c | 27 | ||||
| -rw-r--r-- | board/tqm5200/tqm5200.c | 64 |
2 files changed, 88 insertions, 3 deletions
diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c index c37d4c662e..7af69f21a2 100755 --- a/board/tqm5200/cmd_stk52xx.c +++ b/board/tqm5200/cmd_stk52xx.c @@ -30,8 +30,8 @@ #include <command.h> #if (CONFIG_COMMANDS & CFG_CMD_BSP) -#if defined (CONFIG_STK52XX) +#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) #define DEFAULT_VOL 45 #define DEFAULT_FREQ 500 #define DEFAULT_DURATION 200 @@ -537,7 +537,9 @@ static int cmd_beep(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return rcode; } +#endif +#if defined(CONFIG_STK52XX) void led_init(void) { struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; @@ -736,7 +738,9 @@ int do_led(char *argv[]) return 0; } +#endif +#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) /* * return 1 on CAN initialization failure * return 0 if no failure @@ -1106,6 +1110,7 @@ int do_rs232(char *argv[]) return error_status; } +#ifndef CONFIG_FO300 static void sm501_backlight (unsigned int state) { if (state == BL_ON) { @@ -1115,6 +1120,7 @@ static void sm501_backlight (unsigned int state) *(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &= ~((1 << 26) | (1 << 27)); } +#endif int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -1124,7 +1130,9 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) printf ("Revision 100 of STK52XX not supported!\n"); return 1; #endif +#if defined(CONFIG_STK52XX) led_init(); +#endif can_init(); switch (argc) { @@ -1152,6 +1160,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) else printf ("Error\n"); return rcode; +#ifndef CONFIG_FO300 } else if (strncmp (argv[1], "backlight", 4) == 0) { if (strncmp (argv[2], "on", 2) == 0) { sm501_backlight (BL_ON); @@ -1161,14 +1170,17 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) sm501_backlight (BL_OFF); return 0; } +#endif } break; +#if defined(CONFIG_STK52XX) case 4: if (strcmp (argv[1], "led") == 0) { return (do_led (argv)); } break; +#endif default: break; @@ -1204,7 +1216,9 @@ U_BOOT_CMD( "[channel]\n" " - play short beep on \"l\"eft or \"r\"ight channel\n" ); +#endif /* CONFIG_STK52XX || CONFIG_FO300 */ +#if defined(CONFIG_STK52XX) U_BOOT_CMD( fkt , 4, 1, cmd_fkt, "fkt - Function test routines\n", @@ -1217,5 +1231,14 @@ U_BOOT_CMD( "fkt backlight on/off\n" " - switch backlight on or off\n" ); -#endif /* CONFIG_STK52XX */ +#elif defined(CONFIG_FO300) +U_BOOT_CMD( + fkt , 3, 1, cmd_fkt, + "fkt - Function test routines\n", + "fkt can\n" + " - loopback plug for X16/X29 required\n" + "fkt rs232 number\n" + " - loopback plug(s) for X21/X22 required\n" +); +#endif #endif /* CFG_CMD_BSP */ diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index d6f7737d5b..0026e086cb 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -290,6 +290,8 @@ int checkboard (void) # define CARRIER_NAME "TB5200" #elif defined(CONFIG_CAM5200) # define CARRIER_NAME "Cam5200" +#elif defined(CONFIG_FO300) +# define CARRIER_NAME "FO300" #else # error "Unknown carrier board" #endif @@ -541,7 +543,11 @@ int last_stage_init (void) #ifdef CONFIG_VIDEO_SM501 +#ifdef CONFIG_FO300 +#define DISPLAY_WIDTH 800 +#else #define DISPLAY_WIDTH 640 +#endif #define DISPLAY_HEIGHT 480 #ifdef CONFIG_VIDEO_SM501_8BPP @@ -571,6 +577,28 @@ static const SMI_REGS init_regs [] = {0x80218, 0x000201e9}, {0x80200, 0x00013306}, #else /* panel + CRT */ +#ifdef CONFIG_FO300 + {0x00004, 0x0}, + {0x00048, 0x00021807}, + {0x0004C, 0x301a0a01}, + {0x00054, 0x1}, + {0x00040, 0x00021807}, + {0x00044, 0x091a0a01}, + {0x00054, 0x0}, + {0x80000, 0x0f013106}, + {0x80004, 0xc428bb17}, + {0x8000C, 0x00000000}, + {0x80010, 0x0C800C80}, + {0x80014, 0x03200000}, + {0x80018, 0x01e00000}, + {0x8001C, 0x00000000}, + {0x80020, 0x01e00320}, + {0x80024, 0x042a031f}, + {0x80028, 0x0086034a}, + {0x8002C, 0x020c01df}, + {0x80030, 0x000201ea}, + {0x80200, 0x00010000}, +#else {0x00004, 0x0}, {0x00048, 0x00021807}, {0x0004C, 0x091a0a01}, @@ -591,6 +619,7 @@ static const SMI_REGS init_regs [] = {0x8002C, 0x020c01df}, {0x80030, 0x000201e9}, {0x80200, 0x00010000}, +#endif /* #ifdef CONFIG_FO300 */ #endif {0, 0} }; @@ -604,7 +633,7 @@ void video_get_info_str (int line_number, char *info) { if (line_number == 1) { strcpy (info, " Board: TQM5200 (TQ-Components GmbH)"); -#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200) +#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200) || defined(CONFIG_FO300) } else if (line_number == 2) { #if defined (CONFIG_STK52XX) strcpy (info, " on a STK52xx carrier board"); @@ -612,6 +641,9 @@ void video_get_info_str (int line_number, char *info) #if defined (CONFIG_TB5200) strcpy (info, " on a TB5200 carrier board"); #endif +#if defined (CONFIG_FO300) + strcpy (info, " on a FO300 carrier board"); +#endif #endif } else { @@ -697,3 +729,33 @@ int board_get_height (void) } #endif /* CONFIG_VIDEO_SM501 */ + + +#ifdef CONFIG_BOARD_EARLY_INIT_F +#ifdef CONFIG_FO300 +int board_early_init_f (void) +{ + vu_long timer3_status; + DECLARE_GLOBAL_DATA_PTR; + + /* Configure GPT3 as GPIO input */ + *(vu_long *)MPC5XXX_GPT3_ENABLE = 0x00000004; + + /* Read in TIMER_3 pin status */ + timer3_status = *(vu_long *)MPC5XXX_GPT3_STATUS; + +#ifdef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED + /* Force silent console mode if S1 switch + * is in closed position (TIMER_3 pin status is LOW). */ + if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 0) +#else + /* Force silent console mode if S1 switch + * is in open position (TIMER_3 pin status is HIGH). */ + if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 1) +#endif + gd->flags |= GD_FLG_SILENT; + + return 0; +} +#endif +#endif |