diff options
Diffstat (limited to 'README')
| -rw-r--r-- | README | 23 |
1 files changed, 23 insertions, 0 deletions
@@ -1000,6 +1000,7 @@ The following options need to be configured: CONFIG_CMD_IMLS List all images found in NOR flash CONFIG_CMD_IMLS_NAND * List all images found in NAND flash CONFIG_CMD_IMMAP * IMMR dump support + CONFIG_CMD_IOTRACE * I/O tracing for debugging CONFIG_CMD_IMPORTENV * import an environment CONFIG_CMD_INI * import data from an ini file into the env CONFIG_CMD_IRQ * irqinfo @@ -1171,6 +1172,28 @@ The following options need to be configured: Note that if the GPIO device uses I2C, then the I2C interface must also be configured. See I2C Support, below. +- I/O tracing: + When CONFIG_IO_TRACE is selected, U-Boot intercepts all I/O + accesses and can checksum them or write a list of them out + to memory. See the 'iotrace' command for details. This is + useful for testing device drivers since it can confirm that + the driver behaves the same way before and after a code + change. Currently this is supported on sandbox and arm. To + add support for your architecture, add '#include <iotrace.h>' + to the bottom of arch/<arch>/include/asm/io.h and test. + + Example output from the 'iotrace stats' command is below. + Note that if the trace buffer is exhausted, the checksum will + still continue to operate. + + iotrace is enabled + Start: 10000000 (buffer start address) + Size: 00010000 (buffer size) + Offset: 00000120 (current buffer offset) + Output: 10000120 (start + offset) + Count: 00000018 (number of trace records) + CRC32: 9526fb66 (CRC32 of all trace records) + - Timestamp Support: When CONFIG_TIMESTAMP is selected, the timestamp |