Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to the most recent upstream
  revision including (but not limited to) new material introduced in the
  6.4 version of the spec, update message printing in the ACPI-related
  code, address a few issues and clean up code in a number of places.

  Specifics:

   - Update ACPICA code in the kernel to upstream revision 20210331
     including the following changes:

      * Add parsing for IVRS IVHD 40h and device entry F0h (Alexander
        Monakov).

      * Add new CEDT table for CXL 2.0 and iASL support for it (Ben
        Widawsky, Bob Moore).

      * NFIT: add Location Cookie field (Bob Moore).

      * HMAT: add new fields/flags (Bob Moore).

      * Add new flags in SRAT (Bob Moore).

      * PMTT: add new fields/structures (Bob Moore).

      * Add CSI2Bus resource template (Bob Moore).

      * iASL: Decode subtable type field for VIOT (Bob Moore).

      * Fix various typos and spelling mistakes (Colin Ian King).

      * Add new predefined objects _BPC, _BPS, and _BPT (Erik Kaneda).

      * Add USB4 capabilities UUID (Erik Kaneda).

      * Add CXL ACPI device ID and _CBR object (Erik Kaneda).

      * MADT: add Multiprocessor Wakeup Structure (Erik Kaneda).

      * PCCT: add support for subtable type 5 (Erik Kaneda).

      * PPTT: add new version of subtable type 1 (Erik Kaneda).

      * Add SDEV secure access components (Erik Kaneda).

      * Add support for PHAT table (Erik Kaneda).

      * iASL: Add definitions for the VIOT table (Jean-Philippe
        Brucker).

      * acpisrc: Add missing conversion for VIOT support (Jean-Philippe
        Brucker).

      * IORT: Updates for revision E.b (Shameer Kolothum).

   - Rearrange message printing in ACPI-related code to avoid using the
     ACPICA's internal message printing macros outside ACPICA and do
     some related code cleanups (Rafael Wysocki).

   - Modify the device enumeration code to turn off all of the unused
     ACPI power resources at the end (Rafael Wysocki).

   - Change the ACPI power resources handling code to turn off unused
     ACPI power resources without checking their status which should not
     be necessary by the spec (Rafael Wysocki).

   - Add empty stubs for CPPC-related functions to be used when
     CONFIG_ACPI_CPPC_LIB is not set (Rafael Wysocki).

   - Simplify device enumeration code (Rafael Wysocki).

   - Change device enumeration code to use match_string() for string
     matching (Andy Shevchenko).

   - Modify irqresource_disabled() to retain the resouce flags that have
     been set already (Angela Czubak).

   - Add native backlight whitelist entry for GA401/GA502/GA503 (Luke
     Jones).

   - Modify the ACPI backlight driver to let the native backlight
     handling take over on hardware-reduced systems (Hans de Goede).

   - Introduce acpi_dev_get() and switch over the ACPI core code to
     using it (Andy Shevchenko).

   - Use kobj_attribute as callback argument instead of a local struct
     type in the CPPC linrary code (Nathan Chancellor).

   - Drop unneeded initializatio of a static variable from the ACPI
     processor driver (Tian Tao).

   - Drop unnecessary local variable assignment from the ACPI APEI code
     (Colin Ian King).

   - Document for_each_acpi_dev_match() macro (Andy Shevchenko).

   - Address assorted coding style issues in multiple places (Xiaofei
     Tan).

   - Capitalize TLAs in a few comments (Andy Shevchenko).

   - Correct assorted typos in comments (Tom Saeger)"

* tag 'acpi-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
  ACPI: video: use native backlight for GA401/GA502/GA503
  ACPI: APEI: remove redundant assignment to variable rc
  ACPI: utils: Capitalize abbreviations in the comments
  ACPI: utils: Document for_each_acpi_dev_match() macro
  ACPI: bus: Introduce acpi_dev_get() and reuse it in ACPI code
  ACPI: scan: Utilize match_string() API
  resource: Prevent irqresource_disabled() from erasing flags
  ACPI: CPPC: Replace cppc_attr with kobj_attribute
  ACPI: scan: Call acpi_get_object_info() from acpi_set_pnp_ids()
  ACPI: scan: Drop sta argument from acpi_init_device_object()
  ACPI: scan: Drop sta argument from acpi_add_single_object()
  ACPI: scan: Rearrange checks in acpi_bus_check_add()
  ACPI: scan: Fold acpi_bus_type_and_status() into its caller
  ACPI: video: Check LCD flag on ACPI-reduced-hardware devices
  ACPI: utils: Add acpi_reduced_hardware() helper
  ACPI: dock: fix some coding style issues
  ACPI: sysfs: fix some coding style issues
  ACPI: PM: add a missed blank line after declarations
  ACPI: custom_method: fix a coding style issue
  ACPI: CPPC: fix some coding style issues
  ...

Pull hwmon updates from Guenter Roeck:
 "The most notable change is the removal of the amd_energy driver. It
  was rendered all but unusable by making its attributes privileged-only
  to work around a security issue. A suggested remedy was rejected by
  AMD, so the only real solution was to remove the driver. For the
  future, we'll have to make sure that no privileged-access-only drivers
  are accepted into the hwmon subsystem in the first place. The hwmon
  ABI document was updated accordingly.

  Other changes:

  PMBus drivers:
   - Added driver for MAX15301
   - Added driver for BluTek BPA-RS600
   - Added driver for fsp-3y PSUs and PDUs
   - Added driver for Infineon IR36021
   - Added driver for ST STPDDC60
   - Added support for TI TPS53676 to tps53679 driver
   - Introduced PMBUS symbol namespace. This was made necessary by a
     suggestion to use its exported functions from outside the hwmon
     subsystem.
   - Minor improvements and bug fixes

  New drivers:
   - Driver for NZXT Kraken X42/X52/X62/X72

  Driver enhancements:
   - Added support for Intel D5005 to intel-m10-bmc-hwmon driver
   - Added support for NCT6686D to nct6683 driver

  Other:
   - Converted sch5627 and amd9240 drivers to
     hwmon_device_register_with_info()
   - Added support for fan drawers capability and present registers to
     mlxreg-fan driver
   - Added Dell Latitude E7440 to fan control whitelist in dell-smm
     driver
   - Replaced snprintf in show functions with sysfs_emit. Done with
     coccinelle script for all drivers to preempt endless per-driver
     submissions of the same change.
   - Use kobj_to_dev().  Another coccinelle based change to preempt
     endless per-driver submissions of the same change.
   - Various minor fixes and improvements"

* tag 'hwmon-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (38 commits)
  hwmon: Remove amd_energy driver
  hwmon: Clarify scope of attribute access
  hwmon: (pmbus) Introduce PMBUS symbol namespace
  hwmon: (pmbus) Add pmbus driver for MAX15301
  hwmon: (sch5627) Remove unnecessary error path
  hwmon: (sch5627) Use devres function
  hwmon: (pmbus/pxe1610) don't bail out when not all pages are active
  hwmon: Add driver for fsp-3y PSUs and PDUs
  hwmon: (intel-m10-bmc-hwmon) add sensor support of Intel D5005 card
  hwmon: (sch5627) Split sch5627_update_device()
  hwmon: (sch5627) Convert to hwmon_device_register_with_info()
  hwmon: (nct6683) remove useless function
  hwmon: (dell-smm) Add Dell Latitude E7440 to fan control whitelist
  MAINTAINERS: Add keyword pattern for hwmon registration functions
  hwmon: (mlxreg-fan) Add support for fan drawers capability and present registers
  hwmon: (pmbus/tps53679) Add support for TI TPS53676
  dt-bindings: Add trivial device entry for TPS53676
  hwmon: (ftsteutates) Rudimentary typo fixes
  hwmon: (pmbus) Add driver for BluTek BPA-RS600
  dt-bindings: Add vendor prefix and trivial device for BluTek BPA-RS600
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "Updates for SoC specific drivers include a few subsystems that have
  their own maintainers but send them through the soc tree:

  TEE/OP-TEE:
   - Add tracepoints around calls to secure world

  Memory controller drivers:
   - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
   - Add debug statistics to Tegra20 memory controller
   - Update Tegra bindings and convert to dtschema

  ARM SCMI Firmware:
   - Support for modular SCMI protocols and vendor specific extensions
   - New SCMI IIO driver
   - Per-cpu DVFS

  The other driver changes are all from the platform maintainers
  directly and reflect the drivers that don't fit into any other
  subsystem as well as treewide changes for a particular platform.

  SoCFPGA:
   - Various cleanups contributed by Krzysztof Kozlowski

  Mediatek:
   - add MT8183 support to mutex driver
   - MMSYS: use per SoC array to describe the possible routing
   - add MMSYS support for MT8183 and MT8167
   - add support for PMIC wrapper with integrated arbiter
   - add support for MT8192/MT6873

  Tegra:
   - Bug fixes to PMC and clock drivers

  NXP/i.MX:
   - Update SCU power domain driver to keep console domain power on.
   - Add missing ADC1 power domain to SCU power domain driver.
   - Update comments for single global power domain in SCU power domain
     driver.
   - Add i.MX51/i.MX53 unique id support to i.MX SoC driver.

  NXP/FSL SoC driver updates for v5.13
   - Add ACPI support for RCPM driver
   - Use generic io{read,write} for QE drivers after performance
     optimized for PowerPC
   - Fix QBMAN probe to cleanup HW states correctly for kexec
   - Various cleanup and style fix for QBMAN/QE/GUTS drivers

  OMAP:
   - Preparation to use devicetree for genpd
   - ti-sysc needs iorange check improved when the interconnect target
     module has no control registers listed
   - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
     avoid issues with missing resources and unnecessary deferred probe
   - ti-sysc debug option can now detect more devices
   - ti-sysc now warns if an old incomplete devicetree data is found as
     we now rely on it being complete for am3 and 4
   - soc init code needs to check for prcm and prm nodes for omap4/5 and
     dra7
   - omap-prm driver needs to enable autoidle retention support for
     omap4
   - omap5 clocks are missing gpmc and ocmc clock registers
   - pci-dra7xx now needs to use builtin_platform_driver instead of
     using builtin_platform_driver_probe for deferred probe to work

  Raspberry Pi:
   - Fix-up all RPi firmware drivers so as for unbind to happen in an
     orderly fashion
   - Support for RPi's PoE hat PWM bus

  Qualcomm
   - Improved detection for SCM calling conventions
   - Support for OEM specific wifi firmware path
   - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"

* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
  soc: aspeed: fix a ternary sign expansion bug
  memory: mtk-smi: Add device-link between smi-larb and smi-common
  memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
  memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
  clk: socfpga: fix iomem pointer cast on 64-bit
  soc: aspeed: Adapt to new LPC device tree layout
  pinctrl: aspeed-g5: Adapt to new LPC device tree layout
  ipmi: kcs: aspeed: Adapt to new LPC DTS layout
  ARM: dts: Remove LPC BMC and Host partitions
  dt-bindings: aspeed-lpc: Remove LPC partitioning
  soc: fsl: enable acpi support in RCPM driver
  soc: qcom: mdt_loader: Detect truncated read of segments
  soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
  soc: qcom: pdr: Fix error return code in pdr_register_listener
  firmware: qcom_scm: Fix kernel-doc function names to match
  firmware: qcom_scm: Suppress sysfs bind attributes
  firmware: qcom_scm: Workaround lack of "is available" call on SC7180
  firmware: qcom_scm: Reduce locking section for __get_convention()
  firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
  Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
  ...

Pull staging/IIO driver updates from Greg KH:
 "Here is the big set of staging and IIO driver updates for 5.13-rc1.

  Lots of little churn in here, and some larger churn as well. Major
  things are:

   - removal of wimax drivers, no one has this hardware anymore for this
     failed "experiment".

   - removal of the Google gasket driver, turns out no one wanted to
     maintain it or cares about it anymore, so they asked for it to be
     removed.

   - comedi finally moves out of the staging directory into drivers/comedi

     This is one of the oldest kernel subsystems around, being created
     in the 2.0 kernel days, and was one of the first things added to
     drivers/staging/ when that was created over 15 years ago.

     It should have been moved out of staging a long time ago, it's well
     maintained and used by loads of different devices in the real world
     every day. Nice to see this finally happen.

   - so many tiny coding style cleanups it's not funny.

     Perfect storm of at least 2 different intern project application
     deadlines combined to provide a huge number of new contributions in
     this area from people learning how to do kernel development. Great
     job to everyone involved here.

  There's also the normal updates for IIO drivers with new IIO drivers
  and updates all over that subsystem.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (907 commits)
  staging: octeon: Use 'for_each_child_of_node'
  Staging: rtl8723bs: rtw_xmit: fixed tabbing issue
  staging: rtl8188eu: remove unused function parameters
  staging: rtl8188eu: cmdThread is a task_struct
  staging: rtl8188eu: remove constant variable and dead code
  staging: rtl8188eu: change bLeisurePs' type to bool
  staging: rtl8723bs: remove empty #ifdef block
  staging: rtl8723bs: remove unused DBG_871X_LEVEL macro declarations
  staging: rtl8723bs: split too long line
  staging: rtl8723bs: fix indentation in if block
  staging: rtl8723bs: fix code indent issue
  staging: rtl8723bs: replace DBG_871X_LEVEL logs with netdev_*()
  staging: rtl8192e: indent statement properly
  staging: rtl8723bs: Remove led_blink_hdl() and everything related
  staging: comedi: move out of staging directory
  staging: rtl8723bs: remove sdio_drv_priv structure
  staging: rtl8723bs: remove unused argument in function
  staging: rtl8723bs: remove DBG_871X_SEL_NL macro declaration
  staging: rtl8723bs: replace DBG_871X_SEL_NL with netdev_dbg()
  staging: rtl8723bs: fix indentation issue introduced by long line split
  ...

Commit 60268b0e8258 ("hwmon: (amd_energy) modify the visibility of
the counters") restricted visibility of AMD energy counters to work
around a side-channel attack using energy data to determine which
instructions are executed. The attack is described in 'PLATYPUS:
Software-based Power Side-Channel Attacks on x86'. It relies on quick
and accurate energy readings.

This change made the counters provided by the amd_energy driver
effectively unusable for non-provileged users. However, unprivileged
read access is the whole point of hardware monitoring attributes.

An attempt to remedy the situation by limiting and randomizing access
to chip registers was rejected by AMD. Since the driver is for all
practical purposes unusable, remove it.

Cc: Naveen Krishna Chatradhi <nchatrad@amd.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Exported pmbus symbols are only supposed to be used from PMBus code.
Introduce PMBUS symbol namespace to prevent misuse from other code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add pmbus driver support for Maxim MAX15301 InTune Automatically
Compensated Digital PoL Controller with Driver and PMBus Telemetry

Even though the specification does not specifically mention it,
extensive empirical testing has revealed that auto-detection of
limit-registers will fail in a random fashion unless the delay
parameter is set to above about 80us. The default delay is set
to 100us to include some safety margin.

This patch is tested on a Flex BMR461 converter module.

Signed-off-by: Erik Rosen <erik.rosen@metormote.com>
Link: https://lore.kernel.org/r/20210419101251.24840-1-erik.rosen@metormote.com
[groeck: Added rationale for delay to driver header]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Calling remove() on error whould have only unregistered
the watchdog, and since a failure in registering him
is considered non-fatal and happens last, remove the
error path and return the error codes directly.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20210417210920.15496-3-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Use devm_hwmon_device_register_with_info() and remove hwmon_dev
from sch5627_data struct as it is not needed anymore.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20210417210920.15496-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Certain VRs might be configured to use only the first output channel and
so the mode for the second will be 0. Handle this gracefully.

Fixes: b9fa0a3acfd8 ("hwmon: (pmbus/core) Add support for vid mode detection per page bases")
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Link: https://lore.kernel.org/r/20210416102926.13614-1-fercerpav@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>